V-Bar Brochure - EMCO Flow Systems - #1

Text version of the page

Untitled table.main {} tr.row {} td.cell {} div.block {} div.paragraph {} .font0 { font:4.00pt "Arial", sans-serif; } .font1 { font:8.00pt "Arial", sans-serif; } .font2 { font:12.00pt "Arial", sans-serif; } .font3 { font:20.00pt "Arial", sans-serif; } .font4 { font:21.00pt "Arial", sans-serif; } .font5 { font:9.00pt "Times New Roman", serif; } .font6 { font:12.00pt "Times New Roman", serif; } V-Bar™ Insertion Vortex Flow Meter EM 4 Y S T E M S Engïneered for performance excellence, the V-Bar™ insertion vortex flow meter measures flow rates for a wide variety offluids and pipe sizes. Unlike an inline flowmeter, which replaces a section of pipe, an insertion meter is "tapped" into the flow line and can be mounted virtually anywhere. Benefits Measures liquid, gas, or steam in pipe sizes: 3 to 80" (76 to 2032 mm) High turndown, up to 25:1 Easy to use field configurable EZ-Logic™ menu-driven user interface Superior performance at a low cost Overview The EMCO V-Bar™ insertion flowmeter measures liquid, gas, or steam in a wide variety of pipe sizes. The V-Bar is tapped into the flow line for superior flexibility, and consists of three main components: the retractor, the sensor, and the electronics. The retractor serves to position the sensor within the pipe, and the sensor detects the pattern of vortices as a frequency signal. The "Smart" microprocessor-based EZ-Logic™ electronics condition the signal and provides a frequency output, a scaled puise output, or a 4 to 20 mA DC signal proportional to the average pipe flow rate. Features Rugged construction Process pressure up to 2000 psig (138 barg) Process températures up to 500°F (260°C) Industry standard frequency and/or 4 to 20 mA output signais Optional intégral pressure and/or température measurement from one tap Highly Accurate Insertion vortex flowmeters offer a percentage of actual reading accuracy. This provides highly accurate measurement throughout the application turndown range. Complète Versatility Most V-Bar flowmeters can be installed on an isolation valve, permitting installation and removal without process shutdown. Intégral pressure and/or température measurement may be combined with the V-Bar to provide mass flow measurement from a single pipe tap. In addition, a flow processor may be used to increase the accuracy and functionality of the metering System. The V-Bar flowmeter is capable of metering a wide range of industrial flow applications. The V-Bar is able to handle extremely high turndown requirements up to 25:1, enabling one flowmeter to be 100% accountable at ail flow demand levels,