See other catalogues for
Eltrotec Sensor
You may also be interested in
Text version of the page
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | |
| | | |
| | | Telefon: 07161 / 1565-300 Telefax: 07161 / 1565-303 | | |
| | | Internet-.www.Eltrotec.com e-mail: Info@Eltrotec.com | | |
| | | Daimlerstr. 19 D-73117 Wangen | | |
| | | ELTROTEC Sensor GmbH | | |
| | | |
| | | |
| | | |
| | | |
| | | Laser-Distance-Sensor | | |
| | | |
| | | Series LDS 70/232 | | |
| | | |
| | | • Measuring range • Resolution • Outputs • Sampling rate • Small dimensions | | 5-200 mm (7 versions) 0.6-40 u.m* 4-20 mA / 1-5 VDC / RS232 1000 Hz (65 x 50 x 20) mm | | |
| | | |
| | | |
| | | Laser-Triangulation with CMOS-Technology Basic features: • Center distance 25-160 mm • Resolution typ. 0.6-40 Mm * • Analogue output 4- 20 mA optional: 1-5 VDC with integrated shunt in connection cable • RS232 interface • High linearity • Colour insensitive measurement • Laser Class 2 • Protection IP 67 • ce (* depends on version) Typical Applications: • Distance measurement • Thickness measurement • Displacement measuring • Profile checking • Out-of-balance measurement • Control of overlapping • Position control • Cone belt measurement • Stroke, oscillation Advantages: • Small dimensions • High resolution • High linearity • Wide dynamic range • High insensitive to colour due to CMOS-Technology and intern. digital signal processor with intelligent logic • Vibration resistance 15 g/ (10 Hz -1 kHz) | | |
| | | Dimensions | | |
| | | |
| | | 50 | | |
| | | |
| | | Mounting holes 2x0 4,3/5,8 | | |
| | | 40 | | |
| | | 20 | | |
| | | |
| | | |
| | | |
| | | LDS 70 | | |
| | | |
| | | LASERSTRAHLUNG NICHT IN DEN STRAHL BLICKEN LASERKLASSE 2 Pi 1 mW; £ = 670 nm nach DIN EN60E25-1 03.37 | | |
| | | |
| | | 4 | | |
| | | Laserbeam | | |
| | | |
| | | |
| | | 5 | | |
| | | All dimensions in mm | | |
| | | |
| | | |
| | | Wiring connections | | |
| | | |
| | | Pin 1 | | Colour Reference | | |
| | | |
| | | Error output, open collector NPN; switching to GND, Uce max. 30 VDC, 100 mA, short circuit protected Laser ON/OFF connect pin 2+6 => Laser ON Rx232 Tx232 Output 4-20 mA, short circuit protected GND Supply 12-30 VDC inverse polarity protected Shield (PE) | | |
| | | gn | | |
| | | |
| | | |
| | | 2 | | |
| | | © © © © © 0 | | |
| | | ye bl pink gr bn wt | | |
| | | |
| | | 3 4 5 6 7 | | |
| | | |
| | | 7 pin plug rear sight | | |
| | | |
| | | |
| | | |
| | | Description | | |
| | | |
| | | The Laser Triangulation Sensor LDS 70 is based on latest CMOS technology. It is working with a visible red laser. The measuring values are linearised by an internal signal processor. Due to this the sensor measures the distance very accurate and independent from colour of surface. The LDS 70 provides an analogue output with 4-20 mA. Optional there is a connection cable with shunt for 1-5 VDC output available.The RS232 interface is included. | | |
| | | |
| | | |
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | |