Text version of the page

Pre-insulated terminals 0.1 - 6 mm²

Preinsualted terminals - 19817 1

Pre-insulated terminals Marking of the pre-insulated terminals

Example of product designation

Elpress ring, fork and pin terminals are manufactured from high grade copper and receptacles from brass or tin-bronze. All terminals are electrolytically tin plated to achieve good corrosion protection. The necks of the terminals are brazed and an-nealed to allow crimping in any direction around the neck. The metal in the recep-tacles neck is double folded for excellent mechanical strength and electrical con- ductivity.

Cat. no. A1532R (E, FLS, G etc)

Elpress pre-insulated terminals are, if pos-sible, marked with logotype, nominal max cross section area (mm²)and possible metric stud holesize. This simplifies the identification and inspection. When crimping with Elpress tools an im-print is made on the insulation to show that the proper die nest has been used. Elpress ESA tools also leave a logo imprintto indicateElpress system crimps, traceable to adequate test standards.

A = pre-insulated 15 = cross section area (1,5 mm²) 32 = characteristic size (stud hole 3,2 mm) E=end connectors FLS =receptacles, rolled type FLSF = receptacles, fully insulated rolled type FLSH =multiple tabs, rolled type (piggy back) FLST =receptacles, rolled type, tin-bronze

Insulation

G = fork terminals GB =flanged fork terminals

Elpress insulation sleeves are moulded in polycarbonate which has excellent defor- mation characteristics and maintains its vibration support up to high tempera-tures, well over 100 C. Caution must be taken at alkalic exposure. The colour of the insulation sleeve relates to which cross section area the terminal accepts:

H =tabs (male) HA =bullets (male) HO =sockets (female) K = hook terminals PSK = parallel connectors R = ring terminals SF = blade terminals SFB = blade terminals (flanged) Light yellow sleeve 0,1 - 0,5 mm² SFK = blade terminals Green sleeve* 0,25 - 0,75 mm² SFL = blade terminals SFN =blade terminals (with tab) Red sleeve 0,5 - 1,5 mm² SR = pin terminals Blue sleeve 1,5 - 2,5 mm² SRK = pin terminals Yellow sleeve 4 - 6 mm² SK = through connectors
* or transparent white SKW =through connectors with heat shrink insulation Samples of Elpress crimped pre-insulated terminals.

EasyEntry

Most Elpress insulation sleeves are of EasyEntry type which guides all the con- ductor strandsproperly into the terminal neck. The risk for back-folded strands, possibly resulting in flash-overs and reducedcrimped cross sectionarea istherefore minimised.

EasyEntry.

1:2

Certificate FM20987ISO 9001:2000