See other catalogues for
Elma Electronic
You may also be interested in
Text version of the page
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | |
| | | |
| | | | | |
| | | |
| | | Type Key | | |
| | | |
| | | XX I XXX - XX | | |
| | | |
| | | Orientation/Mounting | | Packaging T - Tray (THT or SMT, 10 or 50 pcs. tray size, depending on shipping qty.) R - Tape & reel with vacuum plug (SMT only, 200 pcs. per reel, shafts separated) | | |
| | | |
| | | V- THT vertical C - THT horizontal S - SMT vertical | | |
| | | |
| | | |
| | | Bushing T - Threaded M7 x 0.75 x 6 mm (nut supplied, packed separately) N - Non-threaded 0 7 x 6 mm | | |
| | | Shaft Type 00 No shaft | | |
| | | |
| | | |
| | | 01 | | |
| | | |
| | | Push Button 6 - 6 N 3 - 3 N 0 - Without push button | | |
| | | Basic type | | |
| | | |
| | | 03 | | |
| | | |
| | | |
| | | 0H | | Knurl DIN82-RAA C | | |
| | | Resolution, Torque1 | | |
| | | |
| | | |
| | | |
| | | | | | | | | | | | | 1 | - 32 detents | (16 | PPR) | 2.0 Ncm | | | | 2 | - 16 detents | ( 8 | PPR) | 1.5 Ncm | | | | 3 | - 16 detents | ( 8 | ppr) | 2.5 Ncm | | | | 4 | - 32 detents | ( 8 | ppr) | 2.0 Ncm | | | | 5 | - 16 detents | (16 | ppr) | 1.5 Ncm | | | | 6 | - 16 detents | (16 | PPR) | 2.5 Ncm | | | | 8 | - No detents | (16 | ppr) | | | | | 9 | - No detents | ( 8 | ppr) | | | | | A | - 32 detents | (16 | ppr) | 0.5 Ncm | | | | | | | | | | | | |
| | | 10 | | |
| | | |
| | | 11 | | |
| | | |
| | | 12 | | |
| | | |
| | | |
| | | 1 O-ring of IP65/IP68 shaft sealing may slightly increase switching torque. | | |
| | | |
| | | 13 | | |
| | | ni-t—j Stainless steel, 16 J low play | | |
| | | |
| | | IP Sealing | | |
| | | |
| | | IP60 IP681 shaft sealing IP681 shaft/front panel sealing (non-threaded bushing gasket provides IP65, O-ring/gasket is mounted) | | |
| | | 0 1 2 | | |
| | | |
| | | 202 | | |
| | | |
| | | |
| | | 30 | | |
| | | |
| | | |
| | | 1 O-ring of IP65/IP68 shaft sealing may slightly increase switching torque. | | |
| | | |
| | | 31 | | |
| | | -^r Stainless steel, low play | | |
| | | |
| | | Shaft Separation M - Mounted S - Separated (snap-in shaft mechanism) N - No shaft | | |
| | | |
| | | 40 | | |
| | | |
| | | < Knurl DIN62-RAA 0.6 | | |
| | | |
| | | |
| | | 43 | | |
| | | |
| | | O-Ring Mounting Tool Order number: E33-ORING-TOOL | | |
| | | 45 | | |
| | | Stainless steel, low play | | |
| | | st3 | | |
| | | |
| | | |
| | | |
| | | |
| | | 512 | | |
| | | 1 Slip the lubricated O-ring over the bushing. 2 Slide the mounting tool over the bushing. 3 While pushing down the O-ring, rotate the mounting tool simultaneously. | | |
| | | |
| | | 1 | | |
| | | Other shafts are available on request. 2 Threaded bushing: Shaft to be ordered separated; shaft mounting after encoder assembly to front panel (nut does no fit over 14" shaft diameter). | | |
| | | |
| | | |
| | | 5^ | | |
| | | |
| | | |
| | | ELMA | | |
| | | www.elma.com | | |
| | | Miniature Coded Switches & Encoders | | |
| | | 28 | | |
| | | |
| | | |
| | | |
| | | |
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | |