See other catalogues for
Elma Electronic
You may also be interested in
Text version of the page
| | | | | | | | | | | | | | | | | | | | | | | | | | |
| | | |
| | | | | |
| | | |
| | | 4.5.10.2 Extruded Front Panels Aluminium 2.5 mm, clear anodised (non-conductive) PCB mounting lugs are formed on the rear face of the panel No PCB fixing screws on the front face of the panel, leaving more space for silk screening and mounting front panel components Suitable for all sub racks and cases Thickness of the mounting lugs (3.48 mm) allows PCBs to be mounted on either side of the lugs At rear drill marks for handle-fixing holes Scope of delivery: • Extruded front panel, clear anodised Front panel screws see below | | |
| | | | | | | | | | | | Width | | B | Part-No. | | | | | mm | inch | 3 U | | | | 3 HP | 15.0 | 0.59 | 26N303 | | | | 4 HP | 20.1 | 0.79 | 26N304 | | | | 5 HP | 25.2 | 0.99 | 26N305 | | | | 6 HP | 30.3 | 1.19 | 26N306 | | | | 7 HP | 35.3 | 1.38 | 26N307 | | | | 8 HP | 40.4 | 1.59 | 26N308 | | | | 10 HP | 50.6 | 1.99 | 26N310 | | | | 12 HP | 60.7 | 2.38 | 26N312 | | | | | | | | | | | |
| | | |
| | | Front Panel Screws • Set of 10 screws • With screw retainer Front panel width up to 9 HP = 2 screws; > 10 HP = 4 screws | | |
| | | |
| | | | | | | | | | Description | Part-No. 10 pes. | | | | Torx screws M2.5 x 11.3, size T8, with plastic screw retainer | 63K159 | | | | Milled edge screws recessed M2.5 x 11.3, with plastic screw retainer | 63-159 | | | | | | | | | |
| | | |
| | | 4.5.10.3 Rigid-Mounted Handle with Identificati • Black, plastic UL94 V-0, label aluminium anodised Scope of delivery: Rigid-mounted handle Identification label Assembly material see below | | |
| | | |
| | | | | | | | | | | Width | Scope of Delivery | Part-No. | | | | 4 HP top* | 5 pes. | 60-200-01 | | | | 4 HP bottom* | 5 pes. | 60-200-02 | | | | 4 HP | 10 pes. | 60-200-04 | | | | 5 HP | 10 pes. | 60-200-05 | | | | 6 HP | 10 pes. | 60-200-06 | | | | 7 HP | 10 pes. | 60-200-07 | | | | 8 HP | 10 pes. | 60-200-08 | | | | 10 HP | 10 pes. | 60-200-10 | | | | 12 HP | 10 pes. | 60-200-12 | | | | | | | | | | |
| | | |
| | | • Other sizes (up to 84 HP) are available upon request * (Flat front panel with card holder) | | |
| | | |
| | | Assembly Material | | |
| | | | | | | | | | Description | Part-No. 100 pes. | | | | Reeessed round head serew | 1902-70 | | | | | | | | | |
| | | |
| | | Other front panels and handles see chapter C "Front Panels, Handles and Plug-In Units" | | |
| | | |
| | | www.elma.eom | | Elmaset | | B | 4_22 | | |
| | | |
| | | |
| | | | | | | | | | | | | | | | | | | | | | | | | | |