catalogue search
P. 01
P. 02
P. 03
P. 04
P. 05
P. 06
P. 07
P. 08
P. 09
P. 10
P. 11
P. 12
P. 13
P. 14
P. 15
P. 16
P. 17
P. 18
P. 19
P. 20
P. 21
P. 22
P. 23
P. 24
P. 25
P. 26
P. 27
P. 28
P. 29
P. 30
P. 31
P. 32
P. 33
P. 34
P. 35
P. 36
P. 37
P. 38
P. 39
P. 40
P. 41
P. 42
P. 43
P. 44
P. 45
P. 46
P. 47
P. 48
P. 49
P. 50
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
You may also be interested in
Piezoelectric actuator, Positioning table, Piezoelectric stage, Positioning stage, Actuator
Text version of the page
| Features High-performance, Low-power AVR® 8-bit Microcontroller RISC Architecture - 118 Powerful Instructions - Most Single Clock Cycle Execution -32 x 8 General Purpose Working Registers - Fully Static Operation - Up to 16 MIPS Throughput at 16 MHz Data and Non-volatile Program Memory - 2K Bytes of In-System Programmable Program Memory Flash Endurance: 10,000 Write/Erase Cycles - 128 Bytes of In-System Programmable EEPROM Endurance: 100,000 Write/Erase Cycles - 128 Bytes Internal SRAM - Programming Lock for Flash Program and EEPROM Data Security Peripheral Features - 8-bit Timer/Counter with Separate Prescaler - 8-bit High-speed Timer with Separate Prescaler 2 High Frequency PWM Outputs with Separate Output Compare Registers Non-overlapping Inverted PWM Output Pins - Universal Serial Interface with Start Condition Detector - 10-bit ADC 11 Single Ended Channels 8 Differential ADC Channels 7 Differential ADC Channel Pairs with Programmable Gain (1x, 20x) - On-chip Analog Comparator - External Interrupt - Pin Change Interrupt on 11 Pins - Programmable Watchdog Timer with Separate On-chip Oscillator Special Microcontroller Features - Low Power Idle, Noise Reduction, and Power-down Modes - Power-on Reset and Programmable Brown-out Detection - External and Internal Interrupt Sources - In-System Programmable via SPI Port - Internal Calibrated RC Oscillator I/O and Packages - 20-lead PDIP/SOIC: 16 Programmable I/O Lines Operating Voltages - 2.7V - 5.5V for ATtiny26L - 4.5V - 5.5V for ATtiny26 Speed Grades - 0 - 8 MHz for ATtiny26L - 0 - 16 MHz for ATtiny26 | |||||||||||
| iififiEL | |||||||||||
| 8-bit Microcontroller with 2K Bytes Flash | |||||||||||
| ATtiny26 ATtiny26L Preliminary | |||||||||||
| Rev. 1477D-AVR-06/03 | |||||||||||