Modular distribution enclosures
32Pages

MODULAR DISTRIBUTION

MAIN TECHNICAL FEATURES Material: shock resistant halogen free UV-resistant technopolymer on ABS base. Standard colours: grey RAL 7035, white RAL 9001, black. Resistance to abnormal heat (Glow Wire Test): up to 650° C. Installation temperature for wall mounting enclosures: min.-5° C, max+60° C. Installation temperature for flush mounting enclosures: min. -15° C, max +60° C. Operating temperature range: min.-25° C, max +60° C. Complete with screw caps to gain double insulation.[O Door can be open at 180° and removed, reversible and symmetric front. Suitable for 53-68 mm high modules and...

MODULAR DISTRIBUTION ENCLOSURES TECHNICAL SPECIFICATION transparent door, every model, easy to Self-adhesive circuit Modular blank double insulation cover sealing Cable inlet through Our modular enclosures form a wide range perfectly complying with the protection and control needs of the modern distribution electrical systems. very easily and quickly thanks to the accessories supplied with the Perfectly symmetric enclosure base: there isn't any top or are fully plain, without any pre- cuttings.That is a clear advantage because the stepped glands, the conduit fittings and the cable glands,...

MODULAR DISTRIBUTION ENCLOSURES TECHNICAL SPECIFICATION modular enclosures EC-brand name harmonious outlook Every modular brass terminal Eletttrocanali modular enclosures have an undoubted advantage: they combine a big inner volume with limited outer dimensions, and a simple linear design fitting The enclosure base is deep enough to grant the conduit inlet joints; at the same time it permits cabling works without any difficulty, because the columns for brass terminal holders are placed The cover is symmetric, the door can therefore be hinged either on the right or on the left, with an...

MODULAR DISTRIBUTION ENCLOSURES mounting examples

MODULAR DISTRIBUTION ENCLOSURES ■WALL MOUNTING ENCLOSURES SERIES 600 MAIN TECHNICAL FEATURES! • Reversible door made of smoky grey polycarbonate. • Enclosure suitable for housing the terminal blocks. • Enclosure suitable for cover sealing. • Galvanized steel DIN rail EN 50022 already assembled. • Blank plastic plate for unused modules.. • Self-adhesive label for circuit identification. • Screw caps to gain double insulation. jO WALL AND FLUSH MOUNTING ENCLOSURES

MODULAR DISTRIBUTION ENCLOSURES ■WALL MOUNTING ENCLOSURES SERIES 600 MAIN TECHNICAL FEATURES! • Reversible door made of smoky grey polycarbonate. • Enclosure suitable for housing the terminal blocks. • Enclosure suitable for cover sealing. • Galvanized steel DIN rail EN 50022 already assembled. • Blank plastic plate for unused modules. • Self-adhesive label for circuit identification. • Screw caps to gain double insulation. O WALL AND FLUSH MOUNTING ENCLOSURES

MODULAR DISTRIBUTION ENCLOSURES Ipjelettrocanalf ■INSTALLATION KIT FOR WALL MOUNTING ENCLOSURES SERIES 600 MAIN TECHNICAL FEATURES! • Installation kit for enclosures series 600/610. • Plastic support, brass terminal block and relevant fixing screws included. • Quantities per packaging are the same as the enclosures, for an easy management of the accessories. Installation kit for wall mounting modular enclosures_ INSTALLATION KIT INSTALLATION KIT PACKAGING SUPPORTS TERMINAL BLOCKS/HOLES PIECES llnsulated brass terminal blocks to be set on DIN RAIL EN 50022 Watertight joints for connection...

MODULAR DISTRIBUTION ENCLOSURES ■WALL MOUNTING MODULAR ENCLOSURES WITHOUT DOOR MAIN TECHNICAL FEATURES: • Pre-cuttings for conduit inlet or cable glands. • Galvanized steel DIN rail EN 50022. WALL AND FLUSH MOUNTING ENCLOSURES

MODULAR DISTRIBUTION ENCLOSURES ■WALL MOUNTING MODULAR ENCLOSURES WITHOUT DOOR SERIES 610 MAIN TECHNICAL FEATURES! • Enclosure suitable for housing the terminal blocks. • Enclosure suitable for cover sealing. • Galvanized steel DIN rail EN 50022 already assembled. • Blank plastic plate for unused modules. • Self-adhesive label for circuit identification. • Screw caps to gain double insulation. 220 WALL AND FLUSH MOUNTING ENCLOSURES

pjelettrocanair MODULAR DISTRIBUTION ENCLOSURES ■INSTALLATION KIT FOR MODULAR ENCLOSURES SERIES 610 MAIN TECHNICAL FEATURES! • Installation kit for enclosures series 600/610. • Plastic support, brass terminal block and relevant fixing screws included. • Quantities per packaging are the same as the enclosures, for an easy management of the accessories. ■ Installation kit for wall mounting modular enclosures INSTALLATION KIT INSTALLATION KIT PACKAGING SUPPORTS TERMINAL BLOCKS/HOLES PIECES ITerminal blocks with support for DIN EN 50022 rail ITEM HOLES AND SECTION mm2 COLOUR Watertight Joints...

MODULAR DISTRIBUTION ENCLOSURES TECHNICAL SPECIFICATION terminals specific Modular blank double insulation circuit labels The family of sealed modular enclosures series 620 with protection degree IP65 perfectly meets the protection and control needs of the modern distribution electrical systems in different weather, to dust and pollution. In short they are suitable for any outdoor installation. The high-quality halogen free technopolymer assures a great resistance to aging caused by the atmospheric agents and UV-rays. Thanks to the perfectly symmetric bottom and front the door can be...

MODULAR DISTRIBUTION ENCLOSURES TECHNICAL SPECIFICATION item code are moulded sides are fully plain, without any pre-cuttings.That permits to join several enclosures side by side The series of sealed modular need to gain a big inner volume, necessary to correctly dissipate rightly manage the cabling, with a linear functional outlook fitting modular windows, permitting to modify the distance between the DIN rails, simply by turning the windows upside down and different places which must however correspond to the ones chosen for the cover or vice versa. module enclosure is suitable for cover...