SCHEDA-GENIO_M - ELCA - #1

Text version of the page

SCHEDA IN GENIO-M REV.01 - 12/07/2005 NUOVA TECNOLOGIA GENIO - M Transmitter AT GENIO-M GENIO-M Receiver GENIO A cablegland output GENIO D connector output CONFIGURATIONS Version Transmitter Receiver GENIO-M C Proportional STEP-STEP 2 double axis joysticks at 4 steps + 1 single axis joystick at 4 steps + up to 10 commands + Key switch + Start/Clacson + Stop Cablegland or connector output ( VDC power supply, PWM or VOLTAGE proportional output) GENIO-M GR (on/off) 2 dual axis joysticks at 4 steps + up to 9 commands + Key switch + Start/Clacson + Stop Cablegland or connector output (VAC or VDC power supply) TECHNICAL DATA Transmitter AT GENIO.H M AT GENIO-K M Receiver GENO A GENIO D Frequency range 433.050 – 434.050 434.050 – 434.790 MHz 869.700 – 870.000 MHz Power supply 24/48/55/110/230 VAC 50/60 Hz 24 VDC (12 VDC optional) RF-output power < 10 mW ERP < 5 mW ERP Absorbed power < 35VA < 30W Typical range Approx. 150 meters N° max channels 21 on/off 10 on/off Temperature range from -20°C to +55°C Proportional output (STEP-STEP version) - Up to 5 0-2 A (PWM) or 0-24 Volt Autonomy at 20°C Approx. 20 hours Antenna Internal Antenna Internal Protection class IP54 Protection class IP44 Size 275x170x180 mm Size 170x500x90 mm Weight 1,1 kg Weight 3,6 Kg 3,0 Kg Housing ABS plastic compound Housing ABS plastic compound Self-stopping device After 8 minutes of no use (excluded as optional) Batteries PINC-07J Battery charger CONTROL-07 A CONTROL-07 D Type NiCd Power supply 80-250 VAC; 50/60Hz 9-30 VDC Capacity 7.2V – 0.7Ah With charging control system Automatic frequency change system CE DIRECTIVE:99/05/CE regarding radio equipment and telecommunications terminal equipment and the mutual recognition of their conformity. Authorization obtained also in extra EU countries. Specifications and design are subjet to change without notice.