Shockproof Load Cells - Eilersen Electric - #5

• Robust capacitive technology

• High tolerance of up to 1.000 % overload

• High accuracy

• High resolution

• Platform size up to 400 x 400 mm

• Hermetically sealed to IP68

• Fast transient response

• Deflection less than 70 urn at rated capacity

• Digital filters

• ATEX certified

• 3 years warranty

The shockproof digital load cell is based on a capacitive measurement principle where a non-contacting ceramic sensor is mounted inside the load cell body. As the load cell contains no moving parts and the sensor is not in contact with the load cell body, the load cell tolerates shocks, torsion, and very high overloads and sideloads. Therefore, the mechanical installation ofthe load cell can be done without expensive and complicated mounting kits and overload protection devices.

The electrical installation of the digital load cell is pure plug-and-play as the signal from the non-contacting sensor is directly converted, compensated and calibrated by a microprocessor to a digital load cell output in grams, kilograms or Newton. Measurements and status codes are transmitted as RS485 data on a single wire coaxial cable (RG-58) which may be up to 100 meters long.

The technology and mechanical design of the Eilersen load cells is covered worldwide by a number of patents.

•2 • ATEX (Zone 1, 2, 21, 22) version • Dynamic weighing

• 5 type SP5075A • Filling, batching, sorting and •10 • ATEX II 2G Ex ia IIC T6 dosingequipment

•20 • ATEX II 2D Ex iaD 21 T85°C • Multiheadcombination

• 50 • Customized versions available weighers

•100 • Packagingmachines

•150 • Flowmeasurement

• Belt scales

• Conveyer scales

• Process weighing

• Bench scales

• Platform scales

• Checkweighers