The Capacitive Technology Product Range

The Eilersen shockproof digital industrial load cells are based on a patented capacitive measurement principle where a non- contacting capacitive sensor is mounted inside the load cell body. As the capacitive sensor is not in contact with the load cell body, the load cells are to a very high degree unaffected by overloads, sideloads, shocks and welding voltages. Therefore, the straightforward mechanical installation of the load cells can be done without expensive and complicated mounting kits and overload protection devices.The electrical installation of the digital load cells is pure plug-and-play as the signal from the non-contacting capacitive sensor is directly converted, compensated and calibrated by a patented ASIC to a digital output in grams, kilograms, tons or Newton. This digital signal is transmitted as RS485 data on a low-cost RG-58 single wire coaxial cable which may be up to 100 meters long. The calibration of the digital load cells is independent of the load cell cable length. Furthermore, the Eilersen digital load cells feature integrated diagnostics.The capacitive technology is the number one choice for industrial applications. • Shockproof Digital Load Cells • Industrial Bus Interfaces • Weighing Indicators/Controllers • Application Software • Maritime and Heavy Duty Industrial scales • Customized Solutions
Dealer/Distributor: Eilersen Electric A/S Kokkedal Industripark 4 DK-2980 Kokkedal Denmark Tel: +45 49 180 100 Fax: +45 49 180 200 E-mail: info@eilersen.com

Visit us at www.eilersen.com