All EFD catalogues and technical brochures

P. 1

741V Series Needle Valvewith BackPack™ Valve ActuatorThe 741V Series Needle Valve applies low-viscosity fluids like silicone oils, solvents andUV-cure adhesives in accurate, repeatable amounts. Because the stainless steel needleseats in the tip...

P. 2

Needle valve systemsFor Nordson EFD LLC sales and service inover 30 countries, contact Nordson EFD orgo to www.nordsonefd.comThe complete system includes the 741VSeries valve, ValveMate™ 8000 controller,the fluid reservoir and dispense tip.Expert...

P. 1

marking inkspaints781RC MicroMark®Recirculating SprayMarking SystemA NORDSON COMPANYThe 781RC MicroMark Recirculating SprayMarking System produces uniform round patternsand stripes from 5.0mm to 30.4mm (0.20" to1.20") wide without clogging or overspray.This...

P. 2

781RC MicroMark RecirculatingSpray Marking SystemElectricAir ConstantAir PulseFluidThe recirculating pump system includesthe 781RC spray valve, ValveMate™8040 controller, recirculating pump and1 liter fluid reservoir.Expert technical assistance...

P. 1

Radial spray valve evenly coats inside cylinders. accelerators activators lubricants primers solvents A NORDSON COMPANY Unique 782RA Series air-actuated spray system applies uniform 360° coating of lubricants, primers...

P. 2

Radial spray valve systems The complete system includes the 782RA dispense valve, ValveMate™ 7060RA controller and the fluid reservoir. Expert technical assistance and high quality standards ensure productive, trouble-free performance....

P. 1

787MS-SS valve systemproduces spray patterns assmall as 3.3 mm (0.130")activatorscoatingsinksliquid fluxesoilssiliconessolventsA NORDSON COMPANYThe 787MS-SS Series is a precision sprayvalve that uses low volume low pressure (LVLP)technology to produce...

P. 2

Spray valve systemsThe complete system includes the 787MS-SS dispense valve, ValveMate 8040 controller, and thefluid reservoir.Expert technical assistance and high quality standards ensure productive, trouble-free performance.EFD offers a full line of...

P. 1

Consistent, precise 781Sspray valve systems.activatorscoatingsgreaseinksliquid fluxesoilssiliconessolventsA NORDSON COMPANYThe 781S Series Low Volume Low Pressure(LVLP) spray systems provide consistent coatingof low to medium viscosity fluids.Microliter...

P. 2

Spray valve systemsThe complete system includes the 781S dispense valve, ValveMate 8040 controller, and the fluid reservoir.Expert technical assistance and high quality standards ensure productive, trouble-free performance. EFDoffers a full line of reliable...

P. 1

316L stainless steel microspray valve for preciseaseptic and sterile fluidapplications.saline solutionsstent coatingsA NORDSON COMPANYpill coatingssilicone oilssolventsThe 784S-SS aseptic spray valve system accurately controlsthe application of most low...

P. 2

Aseptic valve systemsThe complete system includes the 784S-SS valve, ValveMate™ 8040 controller, the fluid reservoirand dispense tip. Expert technical assistance and high quality standards ensure productive, troublefree performance. EFD offers a...

P. 1

Accurate packaging andfilling valve systems.adhesivescosmeticscreamsgreaselubricantsinkssealantsA NORDSON COMPANYPrecision 725HF valve systems dispense lowto high viscosity fluids up to 450ml/second.Best for filling small bottles, foil packs andsamples...

P. 2

High flow valve systemsThe complete system includes the 725HF dispense valve, ValveMate™ 8000 controller, the fluidreservoir and dispense nozzle.Expert technical assistance and high quality standards ensure productive, trouble-free performance.EFD...

P. 1

794 ValveAuger valve system for precise, consistent fluid application.The 794 Series auger valve system is designed to make precise,repeatable deposits of solder paste.Motor ElectricalCable to the 7094ControllerSyringe AdapterAssemblyBy integrating screw...

P. 2

794 ValveAuger valve systemsThe 794 Series auger valves are available in brush and brushless motor configurations.Either configuration can be used with XYZ dispensing robots like EFD’s TT automationsystem.NOTE:For Brushless Motor style 794 Auger...

P. 1

MicroCoat Lubrication System®781S Series0%Use 9 s OilLesThe MicroCoat 781S Series system applies a fine, even coating oflubricants, corrosion inhibitors, and release agents used in themetal forming and die casting industries.This unique modular system...

P. 2

System overview The MicroCoat 781S system provides precise, consistent application of low to high viscosity lubricants from any angle. A precision stroke control adjustment allows the amount of lubricant applied by each valve to be fine-tuned...

P. 1

A NORDSON COMPANYMicroCoat® MC800 Lubrication SystemConfigure up to eight valves. Switch oils in minutes.Applications• High-speed stamping(lead frames, motor laminations,electrical terminals, connector pins)• Tube forming• Fine...

P. 2

Assemble the pieces…Precision Lubricationby MicroCoat.®Reduce oil use 90%Extend Tool Life 200%+The MicroCoat system applies lubricant in a fine, even film. Just theamount you specify. No more, no less. With instant flow adjustment –no...

P. 3

MC800 System OperationThe MC800 Series system operates up to eight valves. Precision flow controlspermit the amount of lubricant applied by each valve to be adjusted independently.Valves can be mounted above or below the stock.When the MicroCoat system...

P. 4

dExtenl LifeToo 0% +ce20ReduposalDis ostsC90% ilUse ss OrLeer AiCleananderClean rtsPaseaIncre ressrmP edsUniforicantSpeub atingL oC®MicroCoat MC800 SeriesMicroCoat valvesMC785M:Standard valveMaximum coverage is 82.6 mm (3.25")MC785M-WF:Wide fan valveMaximum...

P. 1

PICO™ Jet Dispensing SystemsNordson EFDʼs new PICO non-contact dispensing systems combine high production speed with exceptionaldeposit accuracy and process control. By jetting droplets of fluid onto the product, the time-consuming needto move...

P. 2

PICO™ Jet Dispensing SystemsFor Nordson EFD LLC sales and service inover 30 countries, contact Nordson EFD orgo to www.nordsonefd.comEast Providence, RI USAUSA & Canada:800-556-3484; +1-401-431-7000info@nordsonefd.comwww.nordsonefd.comDunstable,...

P. 1

In-line Dispensing ArmsAdhesives Conformal Coatings Cyanoacrylates Greases Paints Reagents Sealants Solder PastesNordson EFD’s SCARA in-line dispensing arms provide the flexibility towork as stand-alone systems or as key components of an automateddispensing...

P. 2

In-line Dispensing ArmsIn-line Dispensing ArmsEasy to program and set up, Nordson EFD’s SCARA in-line robot systemsare ideal for use with in-line conveyors, or products with heavy or highprofiles.Small FootprintCompact all-in-one structure with...

P. 1

Multi-axis Dispensing RobotsAdhesives Conformal Coatings Cyanoacrylates Greases Paints Reagents Sealants Solder PastesNordson EFD’s extensive line of multi-axis dispensing robots isspecifically designed and configured for precise placement anddispensing...

P. 2

Multi-axis Dispensing RobotsMulti-axis Dispensing RobotsRigid StructureAluminum die-cast base, extruded aluminum columnLabyrinth Mechanism Prevents foreign objects from getting under the work tableSmooth MovementMicro-step control systemFlexible InterfaceRS-232C...

P. 1

Rhino® Bulk Unloader for dispensing adhesives and sealantsRTVs greases pastes siliconesNordson EFD Rhino bulk unloaders are designed todispense high-viscosity, ambient-temperature adhesivesand sealants for a variety of manufacturing applications.These...

P. 2

Rhino® Bulk UnloaderOptional Accessories*Some options only available while integrated with EFD Dispense Controller.• Container sizes:20 liter (5-gallon)286 mm (11.25"), 280 mm, 305 mm pail diameters55-gallon (200 liter)584 mm (22.5") drum diameter•...

P. 1

2K Piston InserterFast, Cost-effective Piston InsertionAtlas 2K Piston Inserters are a fast, convenient andcost-effective way to install Nordson EFD’s new AFpistons in 50mL and 200mL side x side cartridges.• Simple to set up and operate•...

P. 1

The AF piston does a superior job of venting all of the air between the material and the piston. Its unique design does not require a shim to bleed the air, nor does it require a second step to insert a center bleed plug. This piston bleeds air...

P. 2

Other Available Pistons■ Solid O-ring■ Solid Multi-Seal Pistons■ Multi-Seal Pistons with a Pre-staged Center Bleed Plug which preventstrapped air when inserting the piston without using a shimPart #DescriptionRatioMaximum VolumeMaterial7702971...

P. 1

The AF piston does a superior job of venting all of the air between the material and the piston. Its unique design does not require a shim to bleed the air, nor does it require a second step to insert a center bleed plug. This piston bleeds air...

P. 2

Other Available Pistons■ Solid O-ring■ Solid Multi-Seal Pistons■ Multi-Seal Pistons with a Pre-staged Center Bleed Plug which preventstrapped air when inserting the piston without using a shimPart #DescriptionRatioMaximum VolumeMaterial7702971...

P. 1

2K Dispensing ToolThe pneumatically operated Equalizer accurately dispenses 2-component (2K)materials packaged in Nordson EFD 50 mL 1:1 or 2:1 ratio cartridges*.•Designed for use with Nordson EFD electropneumatic fluid dispensers•Standard...

P. 1

300ml_ Cartridge Systems Nordson EFD introduces the availability of a 300mL size 1:1 ratio cartridge utilizing the same cost-effective closed-end cartridge design as other Nordson EFD cartridges. This design offers superior quality at a significant...

P. 2

300mL Cartridge SystemsPistons■ Solid Multi-Seal Pistons■ Multi-Seal Pistons with a Prestaged Center■ Bleed Plug which prevents trapped air when inserting the piston without using a shim■ AF piston allows for one step insertion...

P. 1

200mL Cartridge SystemsNordson EFD offers large cartridge systems in 200mL size. The size relates tothe total volume capacity of both sides of the cartridges—for instance, the200mL holds "approximately" 100mL in each side.2:1 ratioFeatures 1:1 and...

P. 2

200mL Cartridge SystemsPart #DescriptionRatioMaximum VolumeMaterial7703001 (CK200SS-01)Open Cartridge w/Installed Nose Plug & 3/8" Nut1:1215mLPP7703004 (CK200SS-02)Open Cartridge w/Installed Nose Plug & 1/2" Nut1:1215mLPP7702942 (C201SS-01)Closed...

P. 1

FAST JULY 2008 Two-component adhesive cartridge systems There are four major cartridge system design styles in the marketplace today. Craig Blum, business manager - adhesive packaging systems, TAH Industries, explains some of the advantages and...

P. 2

FAST JULY 2008 between 1:1 and 10:1; the injection style with ratios greater than 10:1. As with the coaxial and side-by-side cartridges these kits require a special dispensing gun with a cartridge retainer to fit the particular size and...

P. 1

Extra dispensing power in the palm of your hand. Features • Lightweight aluminum handpiece; easy to hold. • Low level fluid indicator lets operators know when to replace the syringe barrel. • Easy tip installation/removal...

P. 1

The smart way to apply most assembly fluidsSmart™ dispensersWhen you need accurate deposits of mostglues, lubricants, sealants, brazing/solderpastes and vinyl adhesives atworkbenches, or for portable assemblies,field applications and repairs, it’s...

P. 2

DispensGun™Available in (5) models to accept 3cc to55cc EFD barrel/piston sets.Dispense sealants and vinyl adhesiveswithout ooze. Or apply grease, pastes,glues and epoxies. Easy. No drip ormess.stainless steeldrive rodDG30 shown2/3 actual sizeweight:...

P. 3

Accessoriesfor the DispensGunHolsterCordura™ nylon gun holster attachesto belt. Provides convenient gunstorage and holds two prefilledbarrels. Includes pouch to carrydispense tips.#PDHOLSTERIlluminator™R21Rugged flashlight attachmentto light...

P. 4

HPD™ HandPlungerThe most useful dispenser available.Applies thick fluids (sealants, solder/brazingpastes, epoxies and grease) easily,accurately and without drip or ooze.Use at workbenches, for field repair kitsand for assemblies. Replaces fatiguing,inefficient...

P. 5

Fluid compatibilitySmart dispensersDGAnaerobicsL1LCoatingsG1GCyanoacrylates2IIGel cyanoacrylatesLLWhite glueGGEpoxiesGGInksIG1GreaseGGOilsILPaste fluxGGSealantsGGSiliconesGGSolder pastesGGBrazing pastesGGSolventsIIUV cureGGVinyl adhesiveKeyG RecommendedL...

P. 1

U LTIMUS V™High Precision DispenserEasy-to-program full electronic pressure regulation keeps criticalfluid dispensing processes consistent from start to finish.Specifically designed to workwith the Ultimus V, thepatent-pending OptimeterTMprovides...

P. 2

U LTIMUS V™High Precision DispenserFeatures• Auto Increment mode adjusts dispensing parameters after a certain number ofshots or a specific lapsed time• 400 individual memory storage cells• Steady, Timed and Teach modes•...

P. 1

HIGH PRECISION DISPENSERSUltimus™ I, II and IIIFeatures and Benefits•All-digital, multi-function display•16 memory settings•4-decimal time setting•Multilingual display•Operator security lockout•High-speed solenoid...

P. 2

HIGH PRECISION DISPENSERSUltimus IV SeriesFeatures and Benefits•Highly repeatable, precise fluid control•Non-pneumatic, shop air not required•All-electric, multi-function display•Programmable pullback stops drooling•100 user-defined...

P. 3

HIGH PRECISION DISPENSERSDispenser AccessoriesPART #ACCESSORYDESCRIPTIONULTIMUS I-III7017105Flex arm syringe barrel holderMounts to dispenser cabinet; can beadjusted to multiple positions37017113Stiff arm syringe barrel holderMounts to dispenser cabinet...

P. 4

For Nordson EFD sales and service in over 30countries, contact Nordson EFD or go towww.nordsonefd.comEast Providence, RI USAUSA & Canada: 800.556.3484; +1.401.431.7000info@nordsonefd.comDunstable, Bedfordshire, UK0800 585733; +44 (0) 1582 666334Ireland...

P. 1

Performus™ V - VII DispensersFor applications that require a high degree of process control.All units feature vacuum control, a convenient Teach function that makesit simple to set initial shot size, and an I/O connection.The Performus VII and Performus...

P. 2

Performus DispensersDispense TimeDisplayDigitalVVIVII VIII3333333333AnalogAir PressureDisplayDigitalVacuumDisplayDigitalDispense time3333Air pressure3333Vacuum3333Steady3333Timed3333Teach3333Time Range0-99.9 seconds3333Air PressureRange0-7 bar (0-100...

P. 1

Performus™ III & IV DispensersFor applications that require a timed shot and vacuum control.The Performus III features a 0-7 bar (0-100 psi) pressure regulatorthat handles all fluids.The Performus IV has a 0-1 bar (0-15 psi) regulator that providesgreater...

P. 2

Performus DispensersDispenseTime DisplayDigitalAir PressureDisplayIV33333333333333AnalogVacuum DisplayIIIDigitalDigitalDispense timeAdjustabilityAir pressureVacuumSteadyModes ofOperationTimedPerformus III & IVTeachTime Range0-99.9 secondsAir PressureRange0-100...

P. 1

Performus™ II DispenserDigital timer and general-purpose air pressure regulator forbasic dispensing applications that require a timed shot.Nordson EFD’s Performus dispensersincrease throughput, improve yields, andreduce production costs through...

P. 2

Performus II DispenserDispenseTime DisplayDigitalAir PressureDisplayAnalogVacuum Display3DigitalDigitalDispense timeAdjustabilityAir pressure333VacuumSteadyModes ofOperationTimed33TeachTime Range0-99.9 secondsAir PressureRange0-100 psi (0-7 bar)33(0-15...

P. 1

Performus™ I DispenserFor operator-controlled dispensing applicationsthat do not require a timed shot.PerformanceGuaranteeNordson EFD’s Performus dispensers increase throughput,improve yields, and reduce production costs throughcontrolled...

P. 2

Performus I DispenserDispenseTime DisplayDigitalAir PressureDisplayAnalogVacuum Display3DigitalDigitalDispense time33SteadyModes ofOperationAir pressureVacuumAdjustability3TimedPerformus ITeachTime Range0-99.9 secondsAir PressureRange0-100 psi (0-7 bar)Vacuum3Each...

P. 1

Series 70 In-Line Stainless Steel Spiral Tube Mixer The Series 70 Mixers are designed for high-pressure applications with two-component adhesives and sealants. The mixers are available in four diameters and with 21 to 32 elements. Its series...

P. 2

Series 70 In-Line Stainless SteelSpiral Tube MixerFor Nordson EFD sales and service in over30 countries, contact Nordson EFD or go towww.nordsonefd.comEast Providence, RI USAUSA & Canada: 800.556.3484; +1.401.431.7000info@nordsonefd.comDunstable,...

P. 1

Series 295 Disposable Plastic Turbo Bayonet Mixer The patented Series 295 Turbo Mixer™ is a disposable static mixer which ensures superior mixing performance and allows the operator to be closer to the work piece. The Turbo (square)...

P. 2

Series 295 Disposable PlasticTurbo Bayonet MixerFor Nordson EFD sales and service in over30 countries, contact Nordson EFD or go towww.nordsonefd.comEast Providence, RI USAUSA & Canada: 800.556.3484; +1.401.431.7000info@nordsonefd.comDunstable, Bedfordshire,...

P. 1

Series 281N Disposable Plastic High Flow Turbo Mixer ^ The 14.3mm High Flow Turbo Mixer™gets things flowingto enable higher flowrates with less effort.The square geometry consists of a series of alternating leftand right hand...

P. 2

Series 281N Disposable PlasticHigh Flow Turbo MixerFor Nordson EFD sales and service in over30 countries, contact Nordson EFD or go towww.nordsonefd.comEast Providence, RI USAUSA & Canada: 800.556.3484; +1.401.431.7000info@nordsonefd.comDunstable,...

P. 1

Series 280 Disposable Plastic Turbo (Square) Bell Mixer The Series 280 11.2mm Turbo Mixer™ square geometry can provide superior mixing, allowing the operator to be closer to the application, and reducing the retained waste within the...

P. 2

Series 280 Disposable PlasticTurbo (Square) Bell MixerFor Nordson EFD sales and service in over30 countries, contact Nordson EFD or go towww.nordsonefd.comEast Providence, RI USAUSA & Canada: 800.556.3484; +1.401.431.7000info@nordsonefd.comDunstable,...

P. 1

Series 260 Disposable Plastic Spiral Bell Mixer Our Series 260 Spiral Mixers are available in Standard Bell and Integral Nut inlet connections. Options ■ Series 260 Spiral Bell Mixer ■ Series 260 Spiral Integral Nut Mixer Specification ■...

P. 2

Series 260 Disposable Plastic Spiral Bell Mixer Series260 Spiral Integral Nut Mixers SAP# (AKA) 7701749 7701758 7701770 7701759 7701742 7701745 7701782 7701795 7701804 7701806 Element Diameter Mixing ...

P. 1

Series 190 Disposable Plastic Spiral Bayonet Mixer Featuring a standard Bayonet connection, the Series 190 mixer is designed for use with 50mL two-component cartridges. Typical applications include mixing epoxies, urethanes, acrylics, and...

P. 2

Series 190 Disposable Plastic Spiral Bayonet Mixer 1 J Series 190 Spiral Bayonet Mixers Part# 7701408 7701411 7701416 7701417 7701424 7701436 7701438 7701449 7701453 7701458 7701486 7701487 7701488 7701510 7701507 190-212) 190-312H) 190-324H) 190-408BT) 190-416) 190-416H) 190-507) 190-517-01) 190-521-01) 190-612) 190-616-01) 190-620) 190-620-01) 190-620H) 190-620BT) Mixing...

P. 1

Series 162A Disposable Plastic Spiral Bell High Flow Mixer Intended for high flow rate meter mix applications, this series contains our largest disposable bell mixers: 0.784 inches in diameter with either 16, 23, 32, 39 or 48 elements. The...

P. 2

Series 162A Disposable PlasticSpiral Bell High Flow MixerSeries 162A MixersPart #MixingElementHousingOutsidePressureElementsDiameterLengthDiameterLimit(inch/mm)(inch/cm)(inch/mm)(Psi@75°F / Bar@30°C)7701057 (162A-616)160.784 / 19.912.5 / 31.70.98...

P. 1

Series 160 Disposable Plastic Spiral Bell MixerSeries 160, 161, 160A, 160AN, 161A & 161ANThe mixing nozzle has a bell inlet which t Nordson EFD Valve manifolds andlarge volume cartridges that separately port the A and B materials directly intothe...

P. 2

Series 160 Disposable Plastic Spiral Bell MixerSAP #(AKA)MixingElementsElementDiameter(inch/mm)HousingLength(inch/cm)OutsideDiameter(inch/mm)Outlet TipOrice(inch/mm)HousingOutletPressureLimit(Psi@75°F /Bar@30°C)7700876 (160-724)240.314 / 8.008.84...

P. 1

The Series 141 Mixers are intended for urethane foam applications. The extended tube serves two purposes- (1) for reach and (2) to reduce the spiralling of material after the mix elements to allow for a more accurate dispense. Specification ■...

P. 2

Series 141 Disposable Plastic Frother MixerFor Nordson EFD sales and service in over30 countries, contact Nordson EFD or go towww.nordsonefd.comEast Providence, RI USAUSA & Canada: 800.556.3484;+1.401.431.7000info@nordsonefd.comDunstable, Bedfordshire,...

P. 1

Series 140 Disposable Plastic Tube Mixer This all-plastic assembly is ideal for short pot life adhesives. Its low cost allows disposal of the mixer instead of purging or baking. The housing is translucent, so the operator can inspect the condition...

P. 2

Series 140 Disposable Plastic Tube Mixer Series 140 Mixer Part# 7700662 7700663 7700664 7700702 7700703 7700704 7700705 7700711 7700712 7700713 7700715 7700737 7700738 7700739 7700741 7700754 7700755 7700757 7700760 7700769 7700770 7700773 7700776 (140-830) (140-836) (140-842) (145-712) (145-718) (145-724) (145-730) (145-812) (145-818) (145-824) (145-830) (146-212) (146-218) (146-224) (146-230) (146-410) (146-420) (146-430) (146-435) (146-608) (146-616) (146-624) (146-632) Mixing...

P. 1

Series 180A Disposable Plastic Turbo (Square) Bell Mixer The Turbo is Nordson EFD's newest disposable static mixer. This patented product ensures superior mixing performance and allows the operator to be closer to the work piece. The...

P. 2

Series 180A Disposable PlasticTurbo (Square) Bell MixerFor Nordson EFD sales and service in over30 countries, contact Nordson EFD or go towww.nordsonefd.comEast Providence, RI USAUSA & Canada: 800.556.3484; +1.401.431.7000info@nordsonefd.comDunstable,...

P. 1

Series 120 Disposable Mixing Elements The Series 120 plastic spiral elements have the "Apple Core" cross section. The elements are injection-molded in one operation ensuring excellent quality control and low unit cost. This geometry ensures ■...

P. 2

Series 120 Disposable Mixing Elements Series 120 Mixing Element Part# 7700467 7700465 7700459 7700469 7700470 7704166 7700478 7700475 7700480 7700481 7700486 7700489 7700507 7700498 7700500 7700509 7700515 7700519 7700523 7700526 7700528 Mixing...

P. 1

Dispense valve systemselection guide A NORDSON COMPANY This guide will help you easily select the bestEFD ή dispense valve system for your specificfluid and application.Page two cross-references the fluid with thefluid application requirements...

P. 2

Valve selector i11 11 11 Tk 11II11 L>^l a nordson company Fluids Microdots* Dots Potting Encapsulating Lines/ Stripes Filling/ Packaging Spray Internal Spray 741V-SS 752V-UHSS — — 741V-SS...

P. 3

Reservoir selector a nordson company Fluids 725DA-SS 725HF-SS 725HF-A 736HPA 741V-SS 702M-SS 741MD-SS 752V-SS 754V-SS 752V-UHSS 781S-SS 782RA 790 Accelerators Activators Alcohol Anaerobics Conformal...

P. 4

702M-SS 725DA-SS 725HF-SS 725HF-A 736HPA 741V-SS 752V-SS 752V-UHSS 741MD-SS 754V-SS 781S-SS 782RA 790 Adjustable fluid flow / / ___ ✓ ✓ ✓ ✓ ...

P. 1

□ solvents UV lacquers UV adhesives resins A NORDSON COMPANY Controlled, consistent coatings and bonding for optical media. The 702M-SS mini-diaphragm dispense valve is designed for drip-free coating and consistent shot-to-shot...

P. 2

Mini-diaphragm valve systems The complete system includes the 702M-SS dispense valve, ValveMate 7000 controller, fluid reservoir and dispense tip. Expert technical assistance and high quality standards ensure productive, trouble-free performance. EFD...

P. 1

A NORDSON COMPANY DispensingSolutions >

P. 2

EFD's mission:To deliver world-class quality products and services with an uncompromising commitment and dedication to treating customers, suppliers and associates with respect and leadership, as we strive for continuous improvement.www.efd-inc.comin...

P. 3

A new way of doing businesswith old-fashioned service. Since 1963, EFD dispensing systems have helped thousandsof companies make precise deposits of adhesives, lubricantsand other assembly fluids.From the Ultra >line of disposable reservoir dispensers...

P. 4

2 WeӒve nearly tripled the number ofparts bonded per one-pound bottle ofcyanoacrylate. Were saving $8,400 ayear in adhesive costs alone.Ҕ Jeff Dyer, Hi-Lex Controls >

P. 5

It's all about dispensing hard-to-handle assembly fluids. Cyanoacrylates Solvents Sealants Grease Anaerobics Lubricants Coatings Silicones Pastes, gels Electrolytes Oils Activators Marking inks UV cures • Apply consistent...

P. 1

Take control ofyour fluid applications. A NORDSON COMPANY >

P. 2

EFD has provided dispensing solutions to the Life Sciences industry for over 30 years. Automation for process uniformity With EFD's benchtop XYZ dispensing systems, bonding, gasketing, and filling operations can be easily programmed using...

P. 3

EFD's Ultra 2800 system is perfect for applications that require precisemetering of assembly fluids that change viscosity,or where a specific flowrate is necessary,such as the dispensing of reagents.The systemfeatures a unique,patented technology that...

P. 4

About EFD Since 1963 EFD has been dedicated to producing the highest quality products; making consistent, on-time deliveries; and providing the very best customer support and service. With four modern manufacturing plants and sales offices throughout...

P. 1

UV-cure and light-cure adhesives resins solvents UV coatings A NORDSON COMPANY Controlled, consistent coatings and bonding in a miniature design. The 702V-SS mini-diaphragm dispense valve is designed for drip-free coatings and consistent...

P. 2

Mini-diaphragm valve systems The complete system includes the 702V-SS dispense valve, ValveMate™ 7000 controller, fluid reservoir and dispense tip. Expert technical assistance and high quality standards ensure productive, trouble-free performance....

P. 1

High pressure valve for sealant and grease control. adhesive grease sealants ANORDSON COMPANY silicones Unique 736HPA balanced-spool valve easily applies industrial sealants, grease and silicones at fluid pressures up to 2,500...

P. 2

High pressure valve systems ANORDSON COMPANY The complete system includes the 736HPA dispense valve,ValveMate 7000 controller,and dispense tip.Expert technical assistance and high quality standards ensure productive,trouble-freeperformance.EFD offers...

P. 1

Accurate packaging and filling valve systems. esive cosmetics creams grease lubricants inks sealants ANORDSON COMPANY Precision 725HF valve systems dispense low to high viscosity fluids up to 450ml/second. Best for filling small bottles,...

P. 2

High flow valve systems The complete system includes the 725HF dispense valve,ValveMate 7000 controller,the fluid reservoir and dispense nozzle.Expert technical assistance and high quality standards ensure productive,trouble-freeperformance.EFD offers...

P. 1

Piston valve systems for precise deposits of viscous fluids. aze pastes epoxies grease paste fluxes RTV/sealants solder resists ANORDSON COMPANY The 725D Series valve systems consistently dispense a wide range of medium to thick fluids,...

P. 2

Piston valve systems ValveMate 7000 Controller Note: Use only oil-free, clean, dry filtered air. Valve open time is the primary control of deposit size.The ValveMate controller puts push-button adjustmentof valve open time where it needs to...

P. 1

activators anaerobics cyanoacrylates fluxes solvents uv-cure & light-cure adhesives Compact diaphragm valve for fine flow control. ANORDSON COMPANY The 752V Series dispense valve systems accurately control the application of most...

P. 2

Diaphragm valve systems The complete system includes the 752V Series valve,ValveMate 7000 controller,the fluid reservoir and dispense tip.Expert technical assistance and high quality standards ensure productive,trouble-freeperformance.EFD offers a full...

P. 1

Compact diaphragm valve for aseptic and sterile fluid applications. saline solutions monomers pill coating vial filling food processing A NORDSON COMPANY The 754V-SS aseptic dispense valve system accurately controls the application of...

P. 2

Aseptic valve systems The complete system includes the 754V-SS valve, ValveMate™ 7000 controller; the fluid reservoir and dispense tip. Expert technical assistance and high quality standards ensure productive, trouble-free performance. EFD offers...

P. 1

activators coatings grease inks liquid fluxes oils silicones solvents Consistent, precise 781S spray valve systems. A NORDSON COMPANY The 781S Series Low Volume Low Pressure (LVLP) spray systems provide consistent coating of low to...

P. 2

Spray valve systems The complete system includes the 781S dispense valve, ValveMate 7040 controller and the fluid reservoir. Expert technical assistance and high quality standards ensure productive, trouble-free performance. EFD offers a full line...

P. 1

accelerators marking inks silicone oils solvents uv-cure adhesives 741V Needle valve system for precise, consistent fluid control. A NORDSON COMPANY The 741V Series valve design applies low viscosity assembly fluids with accurate,...

P. 2

Needle valve systems The complete system includes the 741V dispense valve, ValveMate 7000 controller, the fluid reservoir and dispense tip. Expert technical assistance and high quality standards ensure productive, trouble-free performance. EFD offers...

P. 1

marking inks paints Clog-free, precise 781S MicroMark® spray system. A NORDSON COMPANY Unique MM781-SYS MicroMark® spray marking system produces round patterns and stripes from 0.20" to 1.20" (5.0 mm to 30.4 mm) wide without...

P. 2

MicroMark The complete MM781-SS system includes the 781S-28 dispense valve,ValveMate7040 controller,and the 615DTL fluid reservoir.Expert technical assistance and high quality standards ensure productive,trouble-freeperformance.EFD offers a full line...

P. 1

A NORDSON COMPANY MicroCoat MC800 Lubrication System Configure up to eight valves.Switch oils in minutes. Applications ? High-speed stamping (lead frames,motor laminations,electrical terminals,connector pins) ? Tube forming ? Fine blanking ? Corrosion/rust...

P. 2

Precision Lubrication by MicroCoat. The MicroCoat system applies lubricant in a fine, even film. Just the amount you specify. No more, no less. With instant flow adjustment -no wait time for pads or rollers to become wet or dry out. This unique, fully...

P. 3

MC800 System Operation The MC800 Series system operates up to eight valves.Precision flow controlspermit the amount of lubricant applied by each valve to be adjusted independent-ly.Valves can be mounted above or below the stock.When the MicroCoat system...

P. 4

ExtendTool Life200% + ReduceDisposalCosts Use 90%Less Oil MicroCoat MC800 Series Cleaner AirandCleanerParts UniformLubricantCoatingIncreasePressSpeeds MicroCoat valves MC785M:Standard valveMaximum coverage is 82.6 mm (3.25")MC785M-WF:Wide fan...

P. 1

A NORDSON COMPANY QUALITY COSTS LESS. Ultra >2400 Series >Dispensing Workstation size="-1">

P. 2

Ultra™ 2400 Series Dispensing Workstation cycle counter Introducing the all new Ultra™ 2400 Series. When it comes to applying assembly fluids — from watery thin solvents to thick silicones and paste-like epoxies...

P. 3

#2400FT #2000F755 #2455 Filter muffler Five-micron regulator For dispensing cyanoacrylates,order the regulatorwith a coalescing filter that removes liquid aerosolsfrom the air supply. #2000F756 Vacuum pickup pen system Designed for cleanrooms and other...

P. 4

Dispensing workstation includes Input air hose,fittings,power cord set,omnidirectional foot pedal ✔ Cabinet-mounted barrel holder ✔ Ergonomic hand grip ✔ Adapter hose holder ✔ Quick Start Guide ✔ Users Guide Ңܔ...

P. 1

Hand-operated dispense valves tmJ ... assembly fluid application SOLUTIONS A NORDSON COMPANY

P. 2

You can do much morewith this hand-lever valve,than you can with these .... Set the fluid reservoir pressure at the exact flow youneed.Then position the dispense valve and get precisebeads ...exact,neat,fast and without mess,waste orrework.EFD reliable...

P. 3

752V-HL Get millions of operations without sticking or repairs.Theflexible diaphragm ensures trouble-free,precise operation.Use for cyanoacrylate deposits or for any low viscosity fluid. Shown actual sizeWeight: Note:The fluid input fitting islocated...

P. 4

740V-HL Incorporating precision needle control and zero fluiddead volume,the 740V-HL is designed for millions oftrouble-free operations.Use for precise beads anddots of low to medium viscosity nonreactive fluids. Shown actual sizeWeight: 4.61 oz.(130.8...

P. 5

725-HL Designed for heavy duty operation,the 725-HL providesrelatively high flow application of medium to high viscositynonreactive fluids without fuss,maintenance or downtime.Accepts dispense tips,and larger metal and plastic nozzles. Shown actual...

P. 1

anordson company Automate your dispensing process without a big investment. The new Ultra™ TT Automation Series. www.efd-inc.com/xyz automation@efd-inc.com fax 401-431-0237 USA 800-556-3484 Sales and service of EFD dispensing...

P. 2

Ultra™ TT Automation Series Easier, faster XYZ fluid dispensing than you thought possible. High yields "The Ultra™ TT Automation Series combines precision dispensing and accurate positioning Zero rejects functions into one fully...

P. 3

The only XYZ system that works with a Palm™ handheld.* Setup of the Ultra TT is simple. The quick, straightforward programming of the Palm™ handheld* eliminates the need for a teach pendant. Supported by intuitive GUI (graphic user interface)...

P. 4

Ultra TTSpecifications Optional laserpositioning guide. Ultra 325TTUltra 525TT Work Area X x Y x Z325 x 325 x 100 mm525 x 525 x 100 mm Resolution 10 ٵ10 Repeatability 25 յ25 Max Speed 500 mm / sec500 mm / sec Acceleration 0.25 g 0.25...

P. 1

The smart way to apply most assembly fluids SMART" dispensers When you need accurate deposits of most EI" MmJ ... assembly fluid application SOLUTIONS A NORDSON COMPANY

P. 2

DispensGun Available in (5) models to accept 3ccto 55cc EFD barrel/piston sets.Dispense sealants and vinyl adhesiveswithout ooze.Or apply grease,pastes,glues and epoxies.Easy.Nodrip or mess. > Models DG3For 3cc barrel sizeDG5For 5cc barrel sizeDG10For...

P. 3

Accessories for the DispensGun Holster Cordura >Ι nylon gun holster attachesto belt.Provides convenient gunstorage and holds two prefilledbarrels.Includes pouch to carrydispense tips. >#PDHOLSTER Illuminator 12R Rugged flashlight...

P. 4

HPD™HandPlunger The most useful dispenser available. Applies thick fluids (sealants, solder/brazing pastes, epoxies and grease) easily, accurately and without drip or ooze. Use at workbenches, for field repair kits and for assemblies. Replaces...

P. 5

Fluid compatibility Smart dispensers DGHPD Anaerobics ▲ >1 ▲ Key Coatings ● >1 ● ● Recommended Cyanoacrylates >2 ■■ ▲ Satisfactory Gel cyanoacrylates ▲▲ ■ Do not use White glue...

P. 1

A NORDSON COMPANY Dispensing Solutions >T I F I E D E E R b y a d e S C m U Օ F . L O . A R i n S t A h e U . I I N R D U S T Ultra Dispensing System Catalog size="-1">

P. 2

The core of our Ultra System It's the unique design and production of EFD syringe barrels, pistons and dispense tips that significantly improve assembly fluid applications. The Ultra system makes dispensing easier, more controlled and safer,...

P. 3

Introduction Dispense any assembly fluid accurately and consistently epoxies cyanoacrylates solvents sealants grease anaerobics lubricants coatings flux silicones pastes gels electrolytes oils activators marking inks uv-cure ... and more! ...

P. 4

Ultra 2400 Series Dispensing Workstation When it comes to applying assembly fluids — from watery thin solvents to thick silicones and paste-like epoxies — the innovative Ultra 2400 Series provide the most complete control available...

P. 5

Ultra 1400 Series Fluid Dispensing Kit Whether you apply cyanoacrylates or thick sealants, the versatile, easy-to-use Ultra 1400 dispenses accurate, consistent deposits. Helpful Teach function lets the operator establish deposit size, then stores...