Text version of the page

Specifications

Product TypeFPGAs and Memory Data Rates Data Format (I/O) Transmitters/Receivers HRC is a high-rate communication mezzanine board for OC3/STM1, STS3, or E4; it requires a main board. Programmable FPGA and memory resources are provided by the main board. Data rates are dependent on data format and main board. Channels 0, 1, 2, 3 Any combination below of electrical (STS3 or E4), optical (OC3/STM1), or bothFour transmitters/receivers are included (each either electrical or optical), supporting the data formats and specifications shown below. CHANNELS 0, 1, 2, 3 Electrical: E4 or STS3 Optical: OC3/STM1 (each can be either electrical or optical) 75 Ω 1310 nm Output power — –15.0 to –8.0 dBm Center wavelength — 1260 to 1360 nm Maximum sensitivity (average power) — –29.0 dBm Minimum saturation (average power) — –0.80 dBm Connector BNC, unidirectional LC, bidirectional (CMI coaxial G.703) (NRZ single-mode SFF)Four, as shown above, in any of these combinations:
Connectors CablingPhysical Environmental System and Software Connector Type Combination 1 Combination 2 Combination 3 Combination 4 BNC Four Three Two — LC — One Two Four Consult EDT for purchase options.Weight 3.5 oz. typical Dimensions 6.6 x 4.2 x 0.5 in. (with a main board)Temperature Operating 0° to 40° C Non-operating -40° to 70° C Humidity Operating 1% to 90%, non-condensing at 40° C Non-operating 95%, non-condensing at 45° CFor details on system requirements and EDT-provided software driver packages, see specifications for your EDT main board.

Ordering Options

- Main board: PCI SS / PCI GS / PCIe8 LX - Transmitters/receivers: 4 (options above) - Connectors: 4 (options above) For more options, see main board datasheet. Ask about custom options. 19