Text version of the page

Specifications

Product TypeFPGA Resources Memory ClocksData Rates Data Format (I/O) Protocols Transceivers Connectors Cabling Physical Environmental System and Software Net10G is a network processing mezzanine board for up to OC192/STM64/10GbE; it requires a main board. One programmable FPGA (Xilinx Virtex 5 LX XC5VLX110 or optional 220 or 330), plus FPGA on main board SRAM 8 MB (2 M x 36) for general use or TCAM-associated data DRAM (DDR2) 2 GB for snapshot recording and data buffering TCAMs (with lookup tables and output tied to FPGA) Two cascading, configurable 40-, 80-, 160-, 320-, or 640-bit entries Programmable internal reference clock with jitter attenuation Data rates are dependent on data format and main board. Time code (from external receiver) 1 pps, IRIG-B, or other input, with user-configurable output Channel 0 1GbE (electrical or optical) or SONET OC3/12/48 (SDH STM1/4/16) Channel 1 10GbE (electrical or optical) or SONET OC192 (SDH STM64) (Output can be made to meet SONET/SDH jitter specifications if required.)SONET/SDH - STM1/4/16/64 - concatenated payload; other payloads available upon request Ethernet - IEEE802.3, packet over SONET; header-only or header and payload available upon requestOne optional SFP and one optional XFP are available, supporting the data formats and specifications shown below. CHANNEL 0 Electrical: 1GbE Optical: 1GbE or OC3/12/48 (STM1/4/16) (SFP) (1000 Base-T) 850 nm 1310 nm 1550 nm Output power — –9 to –2.5 dBm –9.5 to –3 dBm –2 to 3 dBm Center wavelength — 830 to 860 nm 1270 to 1360 nm 1500 to 1580 nm Sensitivity — –18 dBm –18 dBm –28 dBm Maximum input power — 0 dBm 0 dBm –9 dBm Connector RJ45 LC LC LC CHANNEL 1 Electrical: 10GbE Optical: 10GbE or OC192 (STM64) (XFP) (10G Base-CX4) 850 nm 1310 nm 1550 nm Output power — –3 to –1 dBm –6 to –1 dBm –1 to 2 dBm Center wavelength — 850 nm 1290 to 1330 nm 1550 nm Sensitivity — –7.5 dBm –13 dBm –15 dBm Maximum input power — –1 dBm –0.5 dBm –1 dBm Connector CX4 LC LC LCOne 7-pin Lemo for time code input One RJ45, LC, or CX4 on each transceiver as shown aboveConsult EDT for purchase options: To 7-pin Lemo on board, from time code source Via one DB9 (for 1 pps or IRIG-B) or BNC (for IRIG-B only) Weight 7.7 oz. typical Dimensions 6.6 x 4.2 x 0.5 in. (with a main board)Temperature Operating 0° to 40° C Non-operating -40° to 70° C Humidity Operating 1% to 90%, non-condensing at 40° C Non-operating 95%, non-condensing at 45° CFor details on system requirements and EDT-provided software driver packages, see specifications for your EDT main board.

Ordering Options

- Main board: PCI GS / PCIe8 LX - FPGA: XC5VLX 110 / 220 / 330 - Transceivers: 1 SFP and 1 XFP (options above) - Cabling: DB9 / BNC Bold is default. For more options, see main board datasheet. Ask about custom options. 15