| | | | |
| | | |
| | | PMC DV FOX is a PMC digital video fiberoptic interface; typically it is used with an RCX LVDS/RS422 or RCX C-Link adapter. | |
| | | FIFOs for up to several lines of data; no frame memory | |
| | | Peak Up to 220 MB/s Typical 190 MB/s or maximum supported by host | |
| | Camera Link Compliance (with RCX C-Link module) | Modes supported Base — common confi gurations Pixel clock rate 20 to 80 MHz Serial Via API or serial DLL (9600 to 115,200 baud) CC1 — CC4 Discretely programmable for steady-state, trigger, and timed pulse For a list of tested cameras, see www.edt.com/pdvcl_cameras.html. | |
| | AIA Compliance (with RCX module) | Supports most AIA format (LVDS/RS422) cameras that provide line- and frame-valid signals and a continuous pixel clock. For a list of tested cameras, see www.edt.com/pcidv_cameras.html. | |
| | | CE Contact EDT RoHS RoHS directive 2002/95/EEC WEEE WEEE directive 2002/96/EC | |
| | | PCI version PCI 2.3 Direct memory access (DMA) Yes Clock rate / data width 66 MHz / 32 bits | |
| | | | |
| | | | |
| | | | |
| | | Estimated at 200,000 hours | |
| | | One or optional two (wavelength 850 nm or optional 1310 nm), with duplex LCs Wavelength Cable Range at 1.25 Gb/s Range at 2.5 Gb/s 850 nm 62-|a MMF 300 meters 150 meters 850 nm 50-|a MMF 500 meters 250 meters 1310 nm 9-|a SMF 10 kilometers 5 kilometers | |
| | | CC lines supported via fi ber, or externally via connector (opto-coupled Berg or optional 7-pin Lemo — mate to FGG.OB.307.CLAD.56) | |
| | | Cabling is purchased separately; consult EDT for options. | |
| | | Weight 2.9 oz. typical Dimensions 6.0 x 2.9 in. | |
| | | Temperature Operating 10° to 40° C; extended -40° to 60° C (33 MHz bus only) Non-operating -20° to 60° C Humidity Operating 20% to 80%, non-condensing at 40° C Non-operating 95%, non-condensing at 40° C | |
| | System and Software System and Software | System must have a PMC bus, 66 MHz or faster (33 MHz will work, but at reduced data rates). Software is included for Windows, Solaris, Linux, and Mac OS X and can be requested for VxWorks; for versions, see our website. | |
| | | | |