Group: ebm‑papst Group
Catalog excerpts
The new AC / EC transformer fans from ebm-papst Axial fans with external-rotor motors in AC and EC technology are our world. What is new is that they are now used for transformer cooling. But then again, why not? After all, efficiency, low noise and total reliability are called for in such an application, too! And so our new AC / EC transformer fans are first choice with project and design engineers, not only when it comes to transformer cooling. Robust, quiet and speed-controlled The new transformer fans with asynchronous and EC motor drives are now also available for the more demanding...
Open the catalog to page 2The new AC / EC transformer fans from ebm-papst Technical parameters & scope Electrical connections Distributors, agents & subsidiaries
Open the catalog to page 3Technical parameters & scope High standards for all ebm-papst products Here at ebm-papst, we constantly strive to further improve our products in order to be able to offer you the best possible product for your application. Careful monitoring of the market ensures that technical innovations are reflected in the improvements of our products. Based on the technical parameters listed below and the ambience you want our product to operate in, we here at ebm-papst can always work out the best solution for your specific application. General performance parameters Service life Any deviations from...
Open the catalog to page 4Measuring station Sound power level All acoustic data is established in keeping with DIN 45635 and ISO The direction of air flow is given as follows: 3744/3745 to accuracy class 2 and given as A-weighted. To measure sound power level Lw 10 microphones are distributed on an enveloping surface on the suction side of the fan under test (measuring set-up as per DIN 45635 T38). Measuring conditions ebm-papst products are measured under the following terms and conditions: - axial fans in the wall ring and without guard grille - Depending on the mounting situation, there can be deviations from the...
Open the catalog to page 5Left: Climate cabinet Right: Salt spray test equipment Mechanical strain / performance parameters Chemo-physical strain / performance parameters All ebm-papst products are subjected to comprehensive tests complying For information on chemo-physical strain, please turn to our brochure with the normative specifications. In addition to this, the tests also reflect „Protecting fans against water and the elements“: the vast experience and expertise of ebm-papst. Vibration test Vibration tests are carried out in compliance with - vibration test in operation according to DIN IEC 68, parts 2-4 -...
Open the catalog to page 6Left: Extended-time test room Middle: Shock test Right: Condensate water test Legal and normative directives The products described in this catalogue are designed, developed and produced in keeping with the standards in place for the relevant product and , if known, the conditions governing the relevant fields of application. Standards The AC products described here comply to EN 60034-1. EC products are in keeping with the applicable specific standard. EMC In general, our EC products comply with the following EMC standards: - interference emission EN 61000-6-3 - interference immunity EN...
Open the catalog to page 7Power input Start-up current Current draw Blade angle Nominal data Nominal voltage – Material: Guard grille made of steel, zinc-plated and plastic coated, RAL 9006 Wall ring made of sheet steel, hot-dip galvanised and plastic coated, RAL 9006 Screwed on fan blades made of sheet aluminium, varnished, RAL 9005 Asynchronous external-rotor motor made of die-cast aluminium, varnished, RAL 9005 Terminal box made of die-cast aluminium, varnished, RAL 9005 – Direction of air flow: “A” – Direction of rotation: clockwise, seen on rotor – Type of protection: IP 54 (according to EN 60529) – Insulation...
Open the catalog to page 8Blade angle Motor protection: TOP brought out (on terminal strip) Cable exit: lateral via terminal box Protection class: I (according to EN 61800-5-1) Product conforming to standard: CE Approvals: VDE (according to EN 60034)
Open the catalog to page 9Power input Start-up current Current draw Blade angle Nominal data Nominal voltage – Material: Guard grille made of steel, zinc-plated and plastic coated, RAL 9006 Wall ring made of sheet steel, hot-dip galvanised and plastic coated, RAL 9006 Screwed on fan blades made of sheet aluminium, varnished, RAL 9005 Asynchronous external-rotor motor made of die-cast aluminium, varnished, RAL 9005 Terminal box made of die-cast aluminium, varnished, RAL 9005 – Direction of air flow: “A” – Direction of rotation: clockwise, seen on rotor – Type of protection: IP 54 (according to EN 60529) – Insulation...
Open the catalog to page 10Blade angle Motor protection: TOP brought out (on terminal strip) Cable exit: lateral via terminal box Protection class: I (according to EN 61800-5-1) Product conforming to standard: CE Approvals: VDE (according to EN 60034)
Open the catalog to page 11Power input Start-up current Current draw Blade angle Nominal data Nominal voltage – Material: Guard grille made of steel, zinc-plated and plastic coated, RAL 9006 Wall ring made of sheet steel, hot-dip galvanised and plastic coated, RAL 9006 Screwed on fan blades made of sheet aluminium, varnished, RAL 9005 Asynchronous external-rotor motor made of die-cast aluminium, varnished, RAL 9005 Terminal box made of die-cast aluminium, varnished, RAL 9005 – Direction of air flow: “A” – Direction of rotation: clockwise, seen on rotor – Type of protection: IP 54 (according to EN 60529) – Insulation...
Open the catalog to page 12Blade angle Motor protection: TOP brought out (on terminal strip) Cable exit: lateral via terminal box Protection class: I (according to EN 61800-5-1) Product conforming to standard: CE Approvals: VDE (according to EN 60034)
Open the catalog to page 13Start-up current Current draw Power input Blade angle Nominal data Nominal voltage – Material: Guard grille made of steel, zinc-plated and plastic coated, RAL 9006 Wall ring made of sheet steel, hot-dip galvanised and plastic coated, RAL 9006 Screwed on fan blades made of sheet aluminium, varnished, RAL 9005 Asynchronous external-rotor motor made of die-cast aluminium, varnished, RAL 9005 Terminal box made of die-cast aluminium, varnished, RAL 9005 – Direction of air flow: “A” – Direction of rotation: clockwise, seen on rotor – Type of protection: IP 54 (according to EN 60529) – Insulation...
Open the catalog to page 14All Ebm-papst catalogs and technical brochures
-
EC centrifugal fans RadiCal
76 Pages
-
AC Motors
16 Pages
-
514 F
4 Pages
-
BCI
60 Pages
-
ECI Series
84 Pages
-
VHD146
5 Pages
-
It’s All a Matter of TechNiQ.
16 Pages
-
Centrifugal fans and blowers
616 Pages
-
Condensing boiler technology
48 Pages
-
AC motors
11 Pages
-
RadiPac EC centrifugal fans
136 Pages
-
RadiCal EC centrifugal fans
172 Pages
-
Axial fans (version 2007)
436 Pages
-
ECI motors
24 Pages
-
VDC-3-49.15
8 Pages
-
ECI 63 modular drive series
14 Pages
-
BG motors
5 Pages
-
BCI motors
28 Pages
-
AC axial fans - HyBlade®
48 Pages
-
EC axial fans - HyBlade®
48 Pages
-
Compact fans for AC and DC
269 Pages
-
Accessories for fans
23 Pages
-
AC axial fans
26 Pages
-
ACmaxx fans
22 Pages
-
Specials for fans
18 Pages
-
DC centrifugal fans
72 Pages
-
DC axial fans
64 Pages
-
AC and DC voltage compact fans
268 Pages
-
RadiPac EC centrifugal fans
104 Pages
-
RadiCal EC/AC centrifugal fans
184 Pages
-
EC/AC axial fans - AxiCool
56 Pages
-
VarioDrive C
9 Pages
-
Plug fans with EC motor
76 Pages
-
GreenTech: The Green Company.
16 Pages
Archived catalogs
-
Condensing boiler technology
48 Pages