Group: ebm‑papst Group
Catalog excerpts
AC axial fans - HyBlade®
Open the catalog to page 1New AC axial fans - HyBlade® A new, first-of-its-kind hybrid blade design makes these ebm-papst axial fans even quieter, more powerful and more durable than ever. In designing the HyBlade® fan blades, we have developed a support structure of high-strength, corrosion-resistant aluminium alloy with a jacket of a special, fibre-reinforced plastics. Compared to conventional blades, the optimal aerodynamic shape results in an enormous noise reduction while significantly increasing efficiency. And thus it offers even more advantages for use in refrigeration, heating and ventilation technology....
Open the catalog to page 2New AC axial fans - HyBlade® GreenTech: The Green Company Electrical connections Technical parameters & scope ebm-papst representatives & subsidiaries
Open the catalog to page 3Sustainability is at the Centre of Our Thoughts and Actions. Out of Conviction! Eco-friendliness and sustainability have always been at the core of our thoughts and actions. For decades, we have worked according to the simple but strict creed of our co-founder Gerhard Sturm: “Each new product we develop has to be better than the last one in terms of economy and ecology.” GreenTech is the ultimate expression of our corporate philosophy.
Open the catalog to page 4GreenTech is pro-active development. GreenTech is acknowledged and certified. Even in the design phase, the materials and processes we use are optimi- Every step in our chain of production meets the stringent standards of sed for the greatest possible eco-friendliness, energy balance and – environmental specialists and the public. The 2008 Environmental Prize wherever possible – recyclability. We continually improve the material of Baden-Wuerttemberg, the Green Award 2009, the Energy Efficiency and performance of our products, as well as the flow and noise charac- Award 2009 of the dena –...
Open the catalog to page 5AC axial fans - HyBlade® Ø 500 Electr. connection Blade angle Nominal data Nominal voltage – Material: Guard grille: Steel, phosphated and coated in black plastic Wall ring: Sheet steel, pre-galvanised and coated in black plastic Blades: Pressed-on round sheet steel plate, extrusion-coated in PP plastics Rotor: Coated in black – Number of blades: 5 – Direction of rotation: counter-clockwise, seen on rotor – Type of protection: IP 54 (acc. to EN 60529) – Insulation class: "F" – Mounting position: Shaft horizontal or rotor on bottom; rotor on top on request – Condensate discharge holes:...
Open the catalog to page 6Cable exit: Via terminal box Protection class: I (acc. to EN 61800-5-1) Product conforming to standard: CE Approvals: VDE (acc. to EN 60034) Without attachments With full square nozzle With guard grille for short nozzle Direction of air flow "A" on request Curves Air performance measured Suction-side noise levels: in ebm-papst full nozzle and without protection against accidental contact LpA measured at 1 m distance to fan axis The acoustic values given are only valid under the measurment conditions listed and installation situation. With any deviation to the stan- dard setup, the specific...
Open the catalog to page 7AC axial fans - HyBlade® Ø 500 Electr. connection Nominal data Blade angle Nominal voltage – Material: Guard grille: Steel, phosphated and coated in black plastic Wall ring: Sheet steel, pre-galvanised and coated in black plastic Blades: Pressed-on round sheet steel plate, extrusion-coated in PP plastics Rotor: Coated in black – Number of blades: 5 – Direction of rotation: counter-clockwise, seen on rotor – Type of protection: IP 54 (acc. to EN 60529) – Insulation class: "F" – Mounting position: Shaft horizontal or rotor on bottom; rotor on top on request – Condensate discharge holes:...
Open the catalog to page 8Cable exit: Via terminal box Protection class: I (acc. to EN 61800-5-1) Product conforming to standard: CE Approvals: VDE (acc. to EN 60034) Without attachments With full square nozzle With guard grille for short nozzle Direction of air flow "A" on request in ebm-papst full nozzle and without protection against accidental contact 60 Suction-side noise levels: LpA measured at 1 m distance to fan axis The acoustic values given are only valid under the measur- ment conditions listed and With any deviation to the stan- dard setup, the specific values 0,05 viewed once installed or fitted! For...
Open the catalog to page 9AC axial fans - HyBlade® Ø 500 with motor M**110, drawings for direction of air flow "V" Mass [kg] Without attachments Internal diameter of the wall ring at least 503 mm Cable gland With full square nozzle With guard grille for short nozzle Internal diameter of the wall ring at least 503 mm
Open the catalog to page 10AC axial fans - HyBlade® Ø 560 Electr. connection Blade angle Nominal data Nominal voltage – Material: Guard grille: Steel, phosphated and coated in black plastic Wall ring: Sheet steel, pre-galvanised and coated in black plastic Blades: Insertion part made of sheet aluminium, extrusion-coated in PP plastics Rotor: Encased in aluminium – Number of blades: 5 – Direction of rotation: counter-clockwise, seen on rotor – Type of protection: IP 54 (acc. to EN 60529) – Insulation class: "F" – Mounting position: Shaft horizontal or rotor on bottom; rotor on top on request – Condensate discharge...
Open the catalog to page 12Cable exit: Via terminal box Protection class: I (acc. to EN 61800-5-1) Product conforming to standard: CE Approvals: VDE (acc. to EN 60034) Without attachments With full square nozzle With guard grille for short nozzle Direction of air flow "A" on request in ebm-papst full nozzle and without protection against Suction-side noise levels: LpA measured at 1 m distance to fan axis The acoustic values given are only valid under the measur3 0,30 ment conditions listed and may vary depending on the installation situation. With any deviation to the stan- dard setup, the specific values viewed once...
Open the catalog to page 13AC axial fans - HyBlade® Ø 560 with motor M**110, drawings for direction of air flow "V" Mass [kg] Without attachments Internal diameter of the wall ring at least 559 mm With full square nozzle With guard grille for short nozzle 125,5 8,5 Internal diameter of the wall ring at least 559 mm
Open the catalog to page 14All Ebm-papst catalogs and technical brochures
-
EC centrifugal fans RadiCal
76 Pages
-
AC Motors
16 Pages
-
514 F
4 Pages
-
BCI
60 Pages
-
ECI Series
84 Pages
-
VHD146
5 Pages
-
It’s All a Matter of TechNiQ.
16 Pages
-
Centrifugal fans and blowers
616 Pages
-
Condensing boiler technology
48 Pages
-
AC motors
11 Pages
-
RadiPac EC centrifugal fans
136 Pages
-
RadiCal EC centrifugal fans
172 Pages
-
Axial fans (version 2007)
436 Pages
-
ECI motors
24 Pages
-
VDC-3-49.15
8 Pages
-
ECI 63 modular drive series
14 Pages
-
BG motors
5 Pages
-
BCI motors
28 Pages
-
EC axial fans - HyBlade®
48 Pages
-
AC / EC Transformer Fans
36 Pages
-
Compact fans for AC and DC
269 Pages
-
Accessories for fans
23 Pages
-
AC axial fans
26 Pages
-
ACmaxx fans
22 Pages
-
Specials for fans
18 Pages
-
DC centrifugal fans
72 Pages
-
DC axial fans
64 Pages
-
AC and DC voltage compact fans
268 Pages
-
RadiPac EC centrifugal fans
104 Pages
-
RadiCal EC/AC centrifugal fans
184 Pages
-
EC/AC axial fans - AxiCool
56 Pages
-
VarioDrive C
9 Pages
-
Plug fans with EC motor
76 Pages
-
GreenTech: The Green Company.
16 Pages
Archived catalogs
-
Condensing boiler technology
48 Pages