Code Switch - Subminiatur Code Switch SC 8 - EBE - (Version JPG) - PDF Catalogue | Technical Documentation

See other catalogues for EBE

Electromagnet, Switch, Magnetic encoder, Absolute encoder, Rotary encoder

Text version of the page

Subminiatur Code Switch SC 8

EBE


	1.0 Construction
	1.1 Number of banks max.	1 bank
	1.2 Switching combinations per bank Design D, detent angle 36°	Code 51, BCD; Code 52, BCD-complement
	Design H, detent angle 22,5°	Code 61, Hexadecimal Code 62, Hexadecimal-Complement
	1.3 Contacts for SMT	Gullwing= Design B
	for printed circuits	Pins = Design C. Horizontal version = D
	1.4 Mounting	Soldering
	2.0 Electrical Data
	2.1 Switching power max.	0,5W
	2.2 Switching voltage max.	< 24VB
	2.3 Switching current max.	<100mA
	2.4 Rest current max.at du 20C	400 mA
	2.5 Test voltage at 50 Hz	250V1min.
	2.6 Life expectancy without electrical power	>10 000 detents
	2.7 Contact resistance initial value	< 250 mfl
	2.8 Insulation resistance	>100MD
	3.0 Mechanical Data
	3.1 Stops	Without stop
	3.2 Operating torque	>0,7 Ncm
	3.3 Shock strength	50g
	3.4 Dust protection	Bank sealed
	4.0 Other Data
	4.1 Contact material	Au
	4.2 Insulating material	Polyphenylensulfide, PPS; Code PS
	4.3 Ambient temperature	-30 to 90C
	4.4 Soldering time and temperature max.	2s/340C with hand soldering 10s/260C with wave soldering 40s/215°C with reflow soldering
	Ordering Codes
	Type designation SC8
	1. Code 51 = BCD, red • 52 = BCD complement, orange 61 = Hexadecimal, gray • 62 = Hexadecimal complement, white
	2. Distribution over 360° 10 or 16

Subminiature switch with extremely small dimensions for vertical or horizontal mounting.

• Height 3,6 mm only.

• Suitable for SMT soldering processes, wave- and infrared-reflow-soldering.

• Suitable for automatic insertion with most of the„Pickand Place" automation machines.

• On request available in embossed tapes for a large numbers of units.

• SMT-version also available on reels of 1100 pieces each.

• Flux tight, insensitive against soldering and washable.

• Available with shaft 03,2x4,5 mm.

3. Contacts

C = Standard pins: Vertical mounting, shaft rectangular to PC board D = Standard pins: Horizontal mounting, shaft parallel to PC board B = Gullwing for SMT: Vertical mounting, shaft rectangular to PC board

Code Switch - Subminiatur Code Switch SC 8 - EBE - #1

Electromagnet, Switch, Magnetic encoder, Absolute encoder, Rotary encoder