video corpo

x505901
21Pages

{{requestButtons}}

Catalog excerpts

x505901 - 1

Vickers® Guide to Mobile Hydraulics 5095.01/EN/0298/A

Open the catalog to page 1
x505901 - 2

Contents Pumps Vane Pumps, Fixed Displacement Single type . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Double type . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Triple type . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ....

Open the catalog to page 2
x505901 - 3

Systems capabilities designed to help you... When hydraulic systems were first used in mobile equipment that moved earth, plowed crops, built highways, dug trenches and loaded materials, Vickers fluid power was there. Today, Vickers is a global leader in designing and manufacturing complete fluid power systems that move the world’s most powerful mobile machinery. Vickers has the expertise needed to provide you with complete fluid power system solutions, including the huge product selection previewed on following pages. We also offer in-depth knowledge of your market, and system design...

Open the catalog to page 3
x505901 - 5

Vane pumps, triple fixed displacement type Vickers fixed displacement triple pumps offer: displacements from 61,3 to 336,8 cm3/r (3.75 to 20.6 in3/r); continuous pressures to 210 bar (3000 psi); speeds to 2700 r/min. All models can be provided with integral valving to limit flow to the operating system, to limit maximum system pressure, and to divide flow between two circuits. Model Section Displacement cm3/r (in3/r) Max. pressure bar (psi) Max. speed r/min Catalog 2520VQSV10 Symbol Shaft end Center section Cover end 40 (2.45) – 67 (4.12) 18 (1.10) – 45 (2.80) 3,3 (.20) – 22,8 (1.39) 210...

Open the catalog to page 5
x505901 - 7

Axial piston pumps and pumpval, closed loop (hydrostatic) These variable pumps and pumpvals offer: displacements from 3.5 to 21.0 cm3/r; maximum pressures to 6000 psi; speeds to 3200 r/min. Numerous controls are offered to satisfy application requirements. The A series pump has a standard charge pump relief in the cover that dumps to case. The B series pumpval comes standard with SAE ”B” 2 bolt flange and a splined coupling for charge pumps. All pumps and pumpvals are standard SAE 4 bolt configuration. Model Displacement cm3/r Max. pressure psi Max. speed r/min 35 A / B 48 A / B 60 A / B 90...

Open the catalog to page 7
x505901 - 9

Piston fixed and variable motors, closed loop (hydrostatic) These fixed and variable motors offer: displacements from 3.5 to 21.0 cm3/r; maximum pressures to 6000 psi; speeds to 3200 r/min. Adjustable detent controls are standard on these motors. A two speed and pressure compensated control is also available to satisfy application requirements. All motors have Code 62 as standard SAE pressure ports. Code 61 and optional adapters are also available. Model Displacement cm3/r Max. pressure psi Max. speed r/min Actual Output Catalog Torque (ft.lbs/1000D p) 48 MF / MV 60 MF / MV 90 MF / MV 120...

Open the catalog to page 9
x505901 - 11

Hydraulic Remote Control HRCs (hydraulic remote controls) are available in hand, foot and mechanically operated versions, designed for pilot pressure actuation and control of remotely located directional valves. They are used in applications where hydraulic pilot operation of system components is controlled from one operator station. The HRCs operate on input flows up to 16 l/min (4.2 USgpm) and pressures up to 110 bar (1600 psi) or 150 bar (2200 psi), dependent on the model and the type of response required for the application. HRCs require input pressures equal to the maximum required...

Open the catalog to page 11
x505901 - 12

Directional Control Valves / Proportional Directional Valves Vickers offers a complete line of mobile directional control valves designed for flexibility, easy application and performance. These valves come in various sizes and operators... solenoid, hydraulic, air, cam or lever to meet a wide range of applications. A soft shift feature is designed to provide smoother control of actuator acceleration and deceleration. The electrically actuated valves use industry- standard connectors to make installation and replacement easier and faster. Our valves use many common connectors such...

Open the catalog to page 12
x505901 - 13

Directional Controls, Sectional Construction These manually, hydraulically and electrically actuated spool type valves are comprised of sections that are internally connected to common pressure and tank return passages. Seals between the sections seal the connecting passages, and the sections are held together by studs and nuts. Valve sections are available as assembled banks, and as separate sections for assembly into banks or to add to or change the functions of a bank. Symbol Model Port Size Max. pressure Max. flow bar (psi) l/min (USgpm) Catalog CMB4P Spool type P,A,B: G 3/8” T: G 1/2”...

Open the catalog to page 13
x505901 - 14

Engineering Applied Valves Each product in this group is designed for a specific application and meets the needs of improving environmental adaptability, design flexibility, increased productivity, and improved safety and reliability. The LT Sectional Directional Control Valve can be actuated manually by levers or hydraulically with a hydraulic remote control and is available in 2-10 section configurations, providing flexible options for specific customer requirements. The EPM Electro-Hydraulic Lift Truck Valve incorporates products such as the Valvistor (EPV) valve and the KTG4V-3S valve...

Open the catalog to page 14
x505901 - 15

Auxiliary Valves The RM3 is an internally pilot operated relief valve providing pressure protection to a hydraulic system. The FM3 is a bypass type pressure compensated flow control and a relief valve. It is used in applications where a constant actuator speed is required in the face of varying pump output. The ACX2 pilot pressure supply unit is used to feed one or more Vickers HRC or other similar hydraulic remote control. It maintains pilot pressure within preset limits when inlet pressure varies above the minimum set reduced pressure. Symbol Model Port Size Max. pressure Max. flow bar...

Open the catalog to page 15

All Eaton Hydraulics catalogs and technical brochures

  1. W Series

    80 Pages

  2. GD5-Series

    24 Pages

  3. KBCG-6-1

    16 Pages

  4. KBCG-3-1*

    16 Pages

  5. Coils

    14 Pages

  6. Eaton HP50

    4 Pages

  7. E-HOEV-MC001

    68 Pages

  8. E-HOEV

    2 Pages

  9. EH066

    2 Pages

  10. A-HC

    8 Pages

  11. 509200

    4 Pages

  12. E-HOBV

    2 Pages

  13. A-HOAK

    69 Pages

  14. et3000

    19 Pages

  15. ttc

    28 Pages

  16. ETRLD

    20 Pages

  17. 509400

    8 Pages

  18. v fifi

    36 Pages

  19. i730

    8 Pages

  20. C001

    23 Pages

  21. XQ5

    20 Pages

  22. E2

    21 Pages

  23. E1

    19 Pages

  24. 1E

    2 Pages

  25. DP

    12 Pages

  26. DBA

    4 Pages

Archived catalogs