Catalogs >
Eaton Filtration >
Type 10-R Series Gas/Liquid Separators

Type 10-R Series Gas/Liquid Separators
2Pages

Catalog excerpts

Type 10-R Series Gas/Liquid Separators - 1

Type 10-R Series Fabricated Construction Gas/Liquid Separation Gas/Liquid Separators Two-Stage Design • or Heavier Than Normal Liquid Loads F FEATURES • Standard and Compact Models • Capable of Handling Slugs of Liquids • Removes 99% of Liquid and Solid Entrainment Particles Larger than 10 Microns • ASME Code Stamp • Two 1/2” NPT Water Gauge Connections • One 1/2” NPT Vent Connection • No Required Maintenance • Gas, Steam, or Air Applications • Flanged • abricated Carbon Steel or Stainless Steel Construction F The Eaton standard size Type 10-R Series Separators are designed for liquid slugs or heavy liquid loads, and can be provided with a large reservoir to meet liquid holdup requirements. For applications where space is restricted, a compact model is available. OPTIONS Applications • Support Stand Type 10-R Series Separators are widely used in the chemical and process • Stainless Steel Construction • Multiple Inlets and/or Outlets industries where large volumes of liquid must be separated from gases. They also may be used as a flash or surge tank, or as a scrubber or demister ahead of steam turbines. Operation Eaton’s Type 10-R Series Separators have two stages for separating large volumes of liquid from a smaller volume of a gas or vapor. In stage one, the flow enters the inlet and is deflected downward by an impingement plate, causing it to lose velocity. This results in the majority of the liquid dropping into a reservoir. In the second stage, the moisture laden gas passes through a vane element where any remaining moisture is separated and flows down into the reservoir. The separator removes all liquid and solid entrainment where the particle size is 10 microns or greater. • Sizes Larger than 16” Liquid Holdup: Type 10-R Standard/Compact (cu ft) Element Total Volume Size in Cubic Ft 3 3.16 / 1.01 4 4.93 / 1.85 5 6.62 / 2.96 6 11.44 / 5.22 8 22.67 / 10.89 10 33.51 / 14.69 12 60.97 / 23.34 14 91.15 / 37.15 16 129.95 / 55.74 Cubic Ft. of Volume Per Inch of Shell 10-R 11-R 12-R 14-R 15-R 16-R 17-R 0.10 / 0.05 0.26 / 0.12 0.67 / 0.28 0.80 / 0.12 0.60 / 0.16 0.28 / 0.16 0.80 / 0.28 0.67 / 0.28 0.13 / 0.07 0.54 / 0.28 1.26 / 0.59 1.43 / 0.44 1.35 / 0.42 0.60 / 0.44 1.43 / 0.44 1.32 / 0.44 0.16 / 0.08 1.01 / 0.47 2.00 / 0.73 2.32 / 0.85 2.25 / 0.73 1.11 / 0.47 2.21 / 0.85 2.12 / 0.73 0.23 / 0.13 2.49 / 1.16 4.21 / 1.89 4.85 / 1.67 4.60 / 1.89 2.61 / 1.16 4.24 / 1.67 3.98 / 1.89 0.36 / 0.24 6.10 / 3.36 10.04 / 5.19 11.09 / 4.19 10.90 / 5.97 6.78 / 3.36 10.20 / 5.03 7.53 / 4.61 0.52 / 0.26 11.45 / 4.37 18.11 / 7.09 17.91 / 5.85 18.48 / 6.35 12.82 / 3.87 16.18 / 5.85 11.96 / 5.61 0.73 / 0.38 20.86 / 7.31 31.41 / 11.34 30.49 / 9.27 32.09 / 9.27 20.06 / 6.79 24.82 / 9.27 20.86 / 7.84 0.96 / 0.56 30.40 / 11.81 53.04 / 18.08 43.48 / 14.07 46.62 / 15.07 29.34 / 8.55 36.22 / 12.06 31.01 / 11.06 1.21 / 0.76 46.76 / 16.30 67.32 / 26.55 61.00 / 21.08 67.62 / 22.45 41.11 / 12.20 52.87 / 22.45 43.13 / 19.72

Open the catalog to page 1

Type 10-R Series Gas/Liquid Separators - 2

Type 10-R Series Gas/Liquid Separators with the ASME Code Section VIII, Division 1 and are code stamped. They are available with 150 lb. slip on raised face raised face flanges rated at fabricated carbon steel construction, with interna vane blades made of 304L stainless steel. and Steam Capacity Charts Dimensions: Type 10-R Gas/Liquid Separators (in/mm) TYPE 10-R TYPE 11-R TYPE 12-R TYPE 14-R 70 Wood Avenue, South (North America only) Europe/Africa/Middle East ®2012 Eaton Corporation. All Rights Reserved. All trademarks and registered trademarks are the property of their respective owners....

Open the catalog to page 2