Exhaust Heads - Eaton Filtration - #1

Text version of the page

22 EATON FILTRATION Gas/Liquid Separators EATON FILTRATION Gas/Liquid Separators 23 Eaton Exhaust Heads are designed to separate entrained water and oil from exhaust air, gas or steam prior to being discharged directly into the atmosphere. They will remove more than 99% of liquids and solids over 10 microns in size from the discharged flow, reducing maintenance costs on roofs and surrounding objects. Operation The moisture laden gas, air or steam enters at the inlet of the exhaust head where it is directed into a centrifugal upward motion. The entrained solids and moisture droplets are separated out by a reduction in velocity. Separated material falls into a drain reservoir. Type 40EHC Exhaust Head Rugged Cast Construction The Eaton Type 40EHC exhaust head is designed for long service life… with body, cover and separating element made of high tensile strength cast iron. Sizes 4” and smaller have threaded (NPT) connections. Sizes 3”, 4” and larger have 125# flanged connections. The flange bolt holes are drilled to straddle the center line of the drain outlet. Flanges are cast integral with the body and have slotted holes which are recessed to prevent the bolt heads from turning (except for the 3” and 4” sizes which are available with flanged or threaded connections). Type 40EHMF Exhaust Head Fabricated Carbon or Stainless Steel Construction The Eaton Type 40EHMF exhaust head muffler is fabricated from carbon or stainless steel and is electrically welded at all joints to withstand heavy duty usage. These exhaust heads work at high temperatures and remain efficient even when steam or gas is discharged at high velocities. The Type 40EHMF has been designed to minimize the noise associated with high discharge velocities. The units permit free flow of steam, gas or vapors with an absolute minimum of back pressure. They feature a separating element of 304/304L stainless steel and the entire exhaust head can be ordered in 304L or 316/316L stainless steel if required. Type 40EHC (cast) Type 40EHMF (fabricated) Carbon or Stainless Steel Construction • Threaded or Flanged Connections Helps Reduce Roof Maintenance Costs Dimensions - Type 40EHC (in / mm) Capacity (lb) Capacity (SCFM) Drain Exhaust Steam/Hr at Exhaust Air at Pipe Diameter Height Connection Flange Weight Atmospheric Atmospheric Pressure Size A B (NPT) O.D. (lb/kg) Pressure (14.7) psia) (14.7) psia) 1 5.25 / 133 6.12 / 156 12 – 11 / 5 160 45 1-12 5.25 / 133 6.12 / 156 12 – 11 / 5 370 100 2, 2-12 7.5 / 190 8.87 / 225 34 – 25 / 12 1,000 280 3 8.75 / 222 11.25 / 286 34 – 40 / 18 2,100 500 4 10 / 254 11.87 / 392 1 – 50 / 23 2,700 700 4 10 / 254 15 / 381 1 9 / 229 68 / 31 2,700 700 5 13/ 330 14 / 356 1-12 10 / 254 90 / 41 4,000 1,100 6 14.75 / 375 18.75 / 476 1-12 11 / 279 115 / 52 6,000 1,700 8 18 / 457 20 / 508 2 13.5 / 343 190 / 86 10,500 2,900 10 23/ 584 24 / 610 2 16 / 406 335 / 152 16,000 4,500 Dimensions - Type 40EHMF (in / mm) Capacity (lb) Capacity (SCFM) Exhaust Stream/Hr at Exhaust Air at Pipe Diameter Drain Weight Atmospheric Atmospheric Size of Outlet A B Size Type (lb/kg) Pressure (14.7 psia) (14.7 psia) 2-12 2.5 / 63 8.62 / 219 16 / 406 1 NPT 55 / 25 1,000 280 3 3 / 76 10.75 / 273 19 / 483 1-12 NPT 65 / 30 1,600 410 4 4 / 102 14 / 356 24 / 610 1-12 NPT 100 / 45 2,700 700 5 5 / 127 16 / 406 26 / 660 1-12 NPT 130 / 59 4,000 1,100 6 6 / 152 18 / 457 30 / 762 1-12 NPT 140 / 64 6,000 1,700 8 8 / 203 20 / 508 36 / 914 2 NPT 240 / 109 10,500 2,900 10 10 / 254 24 / 610 42 / 1,067 2 NPT 390 / 177 16,000 4,500 12 12 / 305 30 / 762 48 / 1,219 2-12 NPT 550 / 250 24,000 6,500 14 14 / 356 36 / 914 54 / 1,372 2-12 NPT 700 / 341 34,000 8,800 16 16 / 406 40 / 1,016 60 / 1,524 3 NPT 850 / 386 44,000 11,500 18 18 / 457 42 / 1,067 66 / 1,676 3 NPT 1,175 / 534 52,000 14,500 20 20 / 508 48 / 1,219 72 / 1,829 3 NPT 1,500 / 682 66,000 17,000 24 24 / 610 54 / 1,372 84 / 2,134 4 Flanged 1,850 / 841 94,000 26,000 30 30 / 762 72 / 1,829 102 / 2,591 4 Flanged 2,100 / 955 145,000 40,000 36 36 / 914 78 / 1,981 112 / 2,845 4 Flanged 4,500 / 2,045 210,000 55,000 42 42 / 1,067 96 / 2,438 130 / 3,302 4 Flanged 6,100 / 2,773 290,000 76,000 48 48 / 1,219 102 / 2,591 148 / 3,760 4 Flanged 7,800 / 3,545 375,000 99,000 Cast Iron-Type 40EHC Fabricated Carbon or Stainless Steel - Type 40EHMF Exhaust Heads FEATURES • Choice of Cast or Fabricated Construction • Removes 99% of Liquid and Solid Entrainment Particles Larger Than 10 Microns • No Required Maintenance • Highly Efficient • Virtually No Back Pressure Threaded Inlet Flanged Inlet