Catalogue - Series 84 E-stop brochure - EAO - (Version JPG)

See other catalogues for EAO

Joystick, Selection switch, Emergency stop switch, Key-lock switch, Push-button switch

Text version of the page

TECHNICAL DETAILS

Emergency-stop

Conventional free air thermal current

Ith = 5 A, as per EN IEC 60947-5-1 the maximum current In continuous operation and at ambient temperature must not exceed the quoted maximum values

Switching system

The double-break switching system can be supplied for the following switching functions:

1 Normally closed, 2 Normally closed, 1 Normally closed + 1 Normally open.

Switch rating

Switch rating AC with silver contact (gold plated), service category AC-15, as per EN IEC 60947-5-1

Voltage: 120 VAC 240 VAC Current: 3 A 1.5 A

Switch rating DC for silver contact (gold plated), service category DC-13, as per EN IEC 60947-5-1 (inductive)

Voltage: 12 VDC 24 VDC 48VDC 60VDC 125VDC 250VDC

Current: 5 A 4 A 2.1 A 1.7 A 0.55 A 0.27A

The Normally closed contacts have forced opening according to EN IEC 60947-5-1

Material

Perfect fit

Connection cable

Polyvinylchloride (PVC), operating temperature up to +65°C.

Degression curve for higher current and temperature on request

Polybutylenterephthalate (PBT), as per UL94 V0 (red items)

Recommended

minimum operational data

Silver contacts (gold plated) Voltage: 1 VAC/DC Current: 1 mA

Lens

Mounting made easy.

Actuator housing

Polyamide (PA66), as per UL94 V0, Flat ribbon cable cover Polyamide (PA 6.6), as per UL94 V0


	Electric strength	500 VAC, 50 Hz, 1 min, as per DIN IEC 60512-2
	Rated conditional short-circuit current	1000 A, type of short-circuit unit 6 A gL/gG, as per EN IEC 60947-5-1
	Protection class	Class II, as per EN IEC 60947-5
	Overvoltage category Class II, as per EN IEC 60947-1
	Degree of pollution	Class 3, as per EN IEC 60947-1
	Environmental conditions
	Storage temperature	-25°C to +85°C
	Operating temperature	-25°C to +65°C
	Front protection	IP 65, as per EN IEC 60529
	Shock resistance	(semi-sinusoidal) max. 150 m/s², pulse width 11 ms, 3-axis, as per EN IEC 60068-2-27
	Vibration resistance	(sinusoidal) max. 100 m/s² at 10 Hz to 500 Hz, 10 cycles, 3-axis, as per EN IEC 60068-2-6
	Climate resistance	Damp heat, cyclic : 96 hours, +25°C / 97% +55°C / 93% relative humidity as per EN IEC 60068-2-30 Damp heat, steady: 56 days, +40°C / 93% relative humidity as per EN IEC 60068-2-78 Dry heat: 96 hours, +70°C as per EN IEC 60068-2-2 Low temperature: 96 hours, -40°C as per EN IEC 60068-2-1 Saline mist: 96 hours, +35°C in chemical solution NaCI, as per EN IEC 60068-2-11
	Approvals	CE Declaration of Conformity UL SEV RoHS compliant

Material of contacts Sliver alloy gold plated

Mechanical characteristics

Mounting hole

22.5 mm dla. as per EN IEC 60947-5-1 with anti-twist device

Mount alongside other Series 84 products.

Adaptable

Adaptable to PCBs of different heights using flying leads.

Customisable

Can be supplied with variety of cable lengths and connectors.

Compatible

Use in combination with full range of EAO Series 84 pushbuttons and indicators.


	Terminals	Terminals 2.8 x 0.8 mm (solderable) CuSn6 tin-plated Flat ribbon cable 2, 4 or 6 wires 0.35mm² (AWG 22)
	Tightening torque	Fixing nut 80 Ncm
	Actuation force	22 N ±4 N
	Actuation travel	Approx. 4 mm to release the internal operation part
	Mechanical life	>50.000 cycles of operations
	Panel strength	Standard mounting 1 to 4mm. With protection collar 1 to 3mm
	Electrical characteristics
	Standards	The devices comply with: EN IEC 60947-5-1, EN IEC 60947-5-5 (Emergency-stop), DIN EN ISO 13850
	Illumination	LED red with pole reversal, constant current source Operation voltage: 5 VDC to 30 VDC Current consumption: 9.7 mAto 12.4 mA
	Rated operational voltage	U_e = 250 VAC, as per EN IEC 60947-1
	Rated insulation voltage	U_i = 250 V, as per EN IEC 60947-1
	Rated impulse withstand voltage	U_imp = 2.5 kV, as per EN IEC 60947-1
	Contact resistance	New state: 50 mQ, as per DIN IEC 60512-2-3
	Isolation resistance	>10¹¹ Q between the opened contacts at 500 VDC, as per DIN IEC 60512-2-10
	Electrical life	Inductive: >50.000 cycles of operations, as per EN IEC 60947-5-1 Voltage: 120 VAC 240 VAC 125 VDC 250 VDC Current: 3 A 1.5 A 0.55 A 0.27 A Resistive: >50.000 cycles, reduced load
	■ 1	Voltage: 1 VAC/DC 42 VAC/DC Current: 100 mA 200 mA

The Emergency-stop switch can be mounted in a front plate with a thickness of between 1 and 4mm. It has a low behind-panel depth of 13.5mm (max) and can be safely and easily adapted to PCBs of different heights. Importantly, the Series 84 Emergency-stop requires no additional assembly because of its 'monoblock' design.

The Series 84 range includes 22.5mm pushbuttons and indicators protected up to IP67. They are suited to a range of industrial applications and guarantee reliable switching even of very light loads. For Series 84 pushbutton and indicator data please contact your local sales office.

www.eao.com

eao

Series 84 E-stop brochure - EAO - #5

Joystick, Selection switch, Emergency stop switch, Key-lock switch, Push-button switch