Industrial 875E,Industrial 881E, Workhorse 875E 04 owners guide - E-Z-GO Textron - #19

/ 44


catalogue search
P. 01
P. 02
P. 03
P. 04
P. 05
P. 06
P. 07
P. 08
P. 09
P. 10
P. 11
P. 12
P. 13
P. 14
P. 15
P. 16
P. 17
P. 18
P. 19
P. 20
P. 21
P. 22
P. 23
P. 24
P. 25
P. 26
P. 27
P. 28
P. 29
P. 30
P. 31
P. 32
P. 33
P. 34
P. 35
P. 36
P. 37
P. 38
P. 39
P. 40
P. 41
P. 42
P. 43
P. 44
Pages:


See other catalogues for E-Z-GO Textron
You may also be interested in

Electric chaser, Utility vehicle, Electric vehicle, Vehicle


Text version of the page
Read all of manual to become thoroughly familiar with this vehicle. Pay particular attention to all Notes, Cautions and Warnings
3. Be sure everything is properly stored and secured.
All vehicles are equipped with an interlock system that disables the controller and prevents the vehicle from being operated while the charger is connected. The inter­lock functions even if the DC plug is not fully connected in the vehicle receptacle. Remove charger plug from vehicle receptacle and properly store cable prior to mov­ing vehicle. For on-board chargers, remove the AC cord from the dedicated outlet and store the cable in the cord storage compartment prior to moving the vehicle.
OPERATING THE VEHICLE
Service Brake Accelerator Pedal
Direction Selector Parking Brake
CAUTION
Improper use of the vehicle or the lack
of proper maintenance may result in decreased performance or damage to the vehicle.
Read and understand the following warnings before attempting to operate the vehicle.
NOTE
AwarningA
Drive the vehicle only as fast as terrain and safety
considerations allow. Consider the terrain and traffic conditions. Also, con-sider the environmental factors which effect the ter­rain and the ability to control the vehicle.
Avoid driving fast down hill. A sudden stop or change of direction may result in loss of control. Use service brake to control speed when traveling down an incline.
Keep feet, legs, hands and arms inside the vehicle at all times.
Use extra care and reduced speed when driving on poor surfaces, such as loose dirt, wet grass, gravel, etc.
Stay in designated areas and avoid steep slopes. Use the parking brake whenever the vehicle is parked.
Avoid extremely rough terrain.
Check the area behind the vehicle before operating in reverse.
Make sure that the direction selector is in correct position before starting the vehicle.
Slow down before and during turns. All turns should be executed at reduced speed.
Always bring the vehicle to a complete stop before shifting the direction selector.
Always remain seated and hold on while the vehicle is in motion.
Fig. 9 Controls
Horn
The horn can be activated by depressing the button located on the right side of the steering column (Ref Fig. 10 on page 5). The horn is located at the front of the vehicle underneath the cowl.
\ Horn
Fig. 10 Horn
BEFORE ENTERING VEHICLE
1. Check for correct tire inflation.
2. Inspect for fluid leaks.

pageCatalog pdf di En 2012-05-20-14