catalogue search
P. 01
P. 02
P. 03
P. 04
P. 05
P. 06
P. 07
P. 08
P. 09
P. 10
P. 11
P. 12
P. 13
P. 14
P. 15
P. 16
P. 17
P. 18
P. 19
P. 20
P. 21
P. 22
P. 23
P. 24
P. 25
P. 26
P. 27
P. 28
P. 29
P. 30
P. 31
P. 32
P. 33
P. 34
P. 35
P. 36
P. 37
P. 38
P. 39
P. 40
P. 41
P. 42
P. 43
P. 44
P. 45
P. 46
P. 47
P. 48
P. 49
P. 50
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
You may also be interested in
Electric chaser, Electric vehicle, Vehicle, Utility vehicle
Text version of the page
| Read all of manual to become thoroughly familiar with this vehicle. Pay particular attention to all Notes, Cautions and Warnings | |||||||||||||||||||||||
| TIRES Tools List Qty. Required Impact wrench, 1/2" drive............................................1 Impact socket, 3/4", 1/2" drive.....................................1 Torque wrench, 1/2" drive, ft. lbs.................................1 Wrench, 1 1/8".............................................................2 To prevent injury caused by a broken socket, use only sockets designed for impact wrench use. Never use a conventional socket. Tire condition should be inspected per the Periodic Service Schedule (Ref. Fig. 22 on page 16). Inflation pressures should be checked when the tires are cool. When removing wheels with an impact wrench, use only impact sockets. Regular sockets are not designed for impact pressures exerted by power tools. A tire explosion can cause severe injury or death. Never exceed inflation pressure rating on tire sidewall. To prevent tire explosion, pressurize tire with small amount of air applied intermittently to seat beads. Never exceed the tire manufacturer's recommendation when seating a bead. Protect face and eyes from escaping air when removing valve core. Use caution when inflating tires. Due to the low volume of these small tires, overinflation can occur in a matter of seconds. Overinflation could cause the tire to separate from the wheel or cause the tire to explode, either of which could cause personal injury. Use caution when inflating tires. Due to the low volume of these small tires, overinflation can occur in a matter of seconds. Overinflation could cause the tire to separate from the rim or cause the tire to explode, either of which could cause personal injury. See GENERAL SPECIFICATIONS section for recommended tire inflation pressure. Under no condition should inflation pressure be higher than recommended on tire sidewall. All three tires should have the same pressure for optimum handling characteristics. Be careful not to overinflate. Due to the low volume of these small tires, overinflation can occur in a matter of seconds. Be sure to install the valve dust cap after checking or inflating. | |||||||||||||||||||||||
| Dry, Level, Clean, Paved Surface | |||||||||||||||||||||||
| Accelerate To Maximum Speed | |||||||||||||||||||||||
| Engage-O Line or Marker Parking Brake | |||||||||||||||||||||||
| | Line or Marker Normal Range of Stopping Distance Any vehicles that stop beyond the Acceptable Stopping Distance or pulls to one side should be removed from service and inspected by a qualified mechanic | |||||||||||||||||||||||
| Acceptable Stopping Distance | |||||||||||||||||||||||
| Fig. 17 Periodic Brake Performance Test | |||||||||||||||||||||||