HVAC Productcatalog - 90 Pages

  1. P. 1

  2. P. 2

  3. P. 3

  4. P. 4

  5. P. 5

  6. P. 6

  7. P. 7

  8. P. 8

  9. P. 9

  10. P. 10

  11. P. 20

  12. P. 30

  13. P. 40

  14. P. 50

  15. P. 60

  16. P. 70

  17. P. 80

  18. P. 90

Catalogue excerpts

new Humidity/temperature transmitter with digital interface Modbus RTU interface BACnet MS/TP certified Listed on www.bacnetinternational.org und www.big-eu.org User configurable and adjustable Air velocity transmitter for very low air velocity Excellent long term stability Lowest sensitivity to dirt and Small angle dependence Large, easily readable Display with background illumination Designs: duct mount, wall mount, remote probe High protection class IP65/NEMA 4 Compact design concepts for easy and fast installation Active or passive output High accuracy User configurable and adjustable Complete...

 Open the catalogue to page 2

Humidity and Temperature Transmitter for Demanding Climate Control The EE210 transmitter by E+E Elektronik meets the highest requirements in demanding climate control applications. Besides the accurate measurement of relative humidity (RH) and temperature (T), EE210 calculates various RH related parameters such as dew point, temperature, absolute humidity and mixing ratio. All measured and calculated values are available on the BACnet MS/TP or Modbus RTU interface, two of them are available on the analogue voltage or current outputs, while up to three values can be shown simultaneously on the...

 Open the catalogue to page 4

Technical Data Measured Values Relative Humidity (RH) Sensor E+E Sensor HCT01-00D Working range 0...100 % RH RH accuracy (incl. hysteresis, non-linearity and repeatability) Wall & duct version: -15...40 °C (5...104 °F) ≤90 % RH ±(1.3 + 0.003*measured value) % RH -15...40 °C (5...104 °F) >90 % RH ± 2.3 % RH -40...60 °C (-40...140 °F) ±(1.5 + 0.015*measured value) % RH Remote probe version at 20 °C (68 °F) ±2.5 % RH Temperature (T) Sensor Pt1000 (tolerance class B, DIN EN 60751) integrated in HCT01 T-accuracy wall & duct remote probe ∆ °C Analogue output Digital output 0-5 V / 0-10 V -1 mA < IL...

 Open the catalogue to page 5

L...according to ordering guide Connection Diagram Output: Modbus RTU or BACnet MS/TP white green yellow brown

 Open the catalogue to page 6

Ordering Guide Model (2x) wall mount (3x) duct mount (5x) remote probe (6x) (x3) (B) without backlight4) (F) with backlight5) (x) none (D) membrane (E) stainless steel sintered (x) for type C relative humidity6) temperature dew point temperature frost point temperature water vapour partial pressure6) mixing ratio6) absolute humidity6) specific enthalpy6) relative humidity6) temperature dew point temperature frost point temperature water vapour partial pressure6) mixing ratio6) absolute humidity6) specific enthalpy6) Digital output (x3) setup8) PROTOcOL Modbus RTU8) BACnet MS/TP9) PARITy (A) odd...

 Open the catalogue to page 7

Wall mount (Type A) Duct mount (Type B) Remote version (Type C)* EE210-P Remote probe* for Type C Additionally for models with RS485 interface EE210 according ordering guide Cable gland Mounting kit Mounting flange Inspection certificate according to DIN EN10204 - 3.1 Quick Guide EE210 RS485 Setup * EE210-P is not included in the Scope of Supply of the EE210 Type C Product configuration adapter Product configuration software Power supply adapter Protection cap for 12 mm probe see data sheet EE-PCA EE-PCS (free download: www.epluse.com/EE210) V03 (see data sheet Accessories) HA010783 v2.2 / Modification...

 Open the catalogue to page 8

v2.2 / Modification rights reserved

 Open the catalogue to page 9

Humidity and Temperature Probe with Modbus Interface EE071 is optimized for use in demanding OEM applications. In addition to the precise measurement of humidity (RH) and temperature (T), the EE071 calculates physical quantities such as dew point temperature, mixing ratio and absolute humidity. All measured and calculated values are available on the RS-485 interface with Modbus RTU protocol. The RH and T sensor HCT01 is perfectly protected against dust and dirt by the E+E proprietary coating. Furthermore, all solder pads are sealed against corrosion. With the appropriate filter cap the EE071 offers...

 Open the catalogue to page 10

Dimensions in mm (inch) polycarbonate housing - EE071-HTPx M12x1 flange (HA010705, Accessories) 1...+UB 2...B-RS485 (= Data-) 3...A-RS485 (= Data+) 4...GND Modbus Map The measured values are saved as a 32Bit float value from 0x19 to 0x25 and as 16Bit signed integer between 0x27 and 0x2D. The factory setting for the Slave-ID is 247 as an integer 16Bit value. This ID can be customised in the register 0x00 (value margin 1 - 247 permitted). The serial number as ASCII-code is located at register address 30001-30008. FLOAT (read register): Register address Protocol address Parameter name Register address Protocol...

 Open the catalogue to page 11

Ordering Guide MODEL Humidity and Temperature (HT) polycarbonate (P) metal (M) metal grid PTFE EE0711) The metal grid filter (stainless steel) is only available in combination with metal housing (M). 2) According to graphs in „Technical Data“ 3) Factory setup: Baud rate: 9600 (A) / Parity: even (E) / Stopbit: 1 (1) Order Example EE071-HTPBCAE1 Model: humidity & temperature Housing: polycarbonate Filter: membrane filter T-Accuracy: High Configuration: baud rate 9600, even parity, 1 stopbit Scope of Supply - EE071 probe according to ordering guide - Inspection certificate according to DIN EN10204...

 Open the catalogue to page 12

v1.17 / Modification rights reserved

 Open the catalogue to page 13

Humidity and Temperature Transmitter for HVAC Applications Specially designed for HVAC, the EE160 sensor by E+E Elektronik is a costeffective, highly accurate and reliable solution for measuring relative air humidity and temperature. The enclosure minimizes installation costs and provides outstanding protection against contamination and condensation, thus ensuring flawless operation. The EE160 employs the new humidity/temperature E+E sensor element HCT01 with excellent long term stability and resistance against pollutants. In combination with a long calibration experience, the EE160 provides a...

 Open the catalogue to page 14

Technical data Measured values Relative Humidity Sensor Working range Accuracy at 20°C Temperature dependency Temperature Sensor T-Accuracy at 20°C E+E Sensor HCT01-00D 10...95 % RH ±2.5 % RH typ. ±0.03 % RH/°C Pt1000 (tolerance class B, DIN EN 60751) ±0.3 °C Analogue output (RH: 0...100%; T: see ordering guide) Digital output Passive T-sensor 4-wire 0-10 V -1 mA < I < 1 mA or 4-20 mA (two-wire) R < 500 Ohm RS485 (BACnet MS/TP or Modbus RTU) max. 32 EE160 in one bus L Power supply for 0 - 10 V / RS485 for 4 - 20 mA Current consumption Analogue Digital Connection Housing material Protection class...

 Open the catalogue to page 15

All E+E ELEKTRONIK catalogues and technical brochures

  1. E+E Product Catalog

    256 Pages

    En
  2. EE061

    2 Pages

    En
  3. HCT01

    4 Pages

    En
  4. EE431

    3 Pages

    En
  5. EE441

    2 Pages

    En
  6. EE451

    3 Pages

    En
  7. EE461

    2 Pages

    En
  8. EE471

    3 Pages

    En
  9. EE10

    2 Pages

    En
  10. EE08

    2 Pages

    En
  11. EE07

    2 Pages

    En
  12. EE04

    2 Pages

    En
  13. EE060

    2 Pages

    En
  14. EE03

    2 Pages

    En
  15. EE02

    1 Pages

    En
  16. EE210

    5 Pages

    En
  17. EE160

    4 Pages

    En
  18. EE-PCA

    2 Pages

    En