EE07-02 - 2 Pages

Add to MyDirectIndustry favorites
EE07-02

Catalog excerpts

Low Power Humidity / Temperature Probe with Digital Output EE07-02 is a version of the well-proven EE07 humidity (RH) and temperature (T) probe, optimized for very low power consumption and ideal for battery powered measurement devices. It is available in polycarbonate or metal enclosure and features the well-proven E+E HC105 humidity sensor. The wide T working range, the T compensation and the choice of filter caps make EE07-02 appropriate for both indoor and outdoor use. The E+E proprietary coating protects the humidity sensor against corrosion and dirt, which leads to best long term stability even in harsh environment. The measured values are available on the serial E2 interface. The M12 connector allows for probe replacement within seconds. The user can perform the RH and T adjustment of the probe with the optional configuration kit. Battery powered measurement devices    Very low power consumption Data loggers    Outstanding RH and T Accuracy Hand held meters    Excellent long term stability Measured values Relative Humidity Sensor element    E+E HC105 Digital output (2 wire E2 interface)1    output value: 0.00...100.00 % RH Accuracy incl. hysteresis and nonlinearity ±2 % RH (0...90 % RH)    ±3 % RH (90...100 % RH) Traceable to intern. standards, administrated by NIST, PTB, BEV... Supply voltage dependency at UB < 3.3 V DC typ. -0.0026 % RH/mV Temperature dependence    < (0.025 + 0.0003 x RH) [ %°CH] Pt1000 (tolerance class A, DIN EN 60751) output value: -40.00...+80.00 °C (-40...176 °f) Temperature Sensor element Digital output (2 wire E2 interface)1’ General Supply voltage (Class III) <$> Voltage level digital interface Current consumption Average current consumption Housing Electromagnetic compatibility2) 2.7 V DC - 5.5 V DC < Supply voltage, but max 3.5 V < 6 pA, in sleep mode 1.5 - 2.5 mA during measurement (150 ms) < 200 pA at sampling rate 1 s polycarbonate or stainless steel / IP65 EN 61326-1 EN 61326-2-3 Temperature range working temperature: storage temperature: 30 m (98.4 ft) -40...80 °C (-40...176 °F) -40...60 °C (-40...140 °F) 2) No protection against surge v1.4 / Modification rights reserved EE07-02 See details at support literature at www.epluse.com/EE07 3) Depends on the bus frequency

 Open the catalog to page 1

ELEKTRONiK• Ges.m.b.H. 1) Only available for model humidity & temperature (FT). 2) The metal housing (M) is only available with stainless steel grid filter (9). The stainless steel grid filter (9) is only available with metal housing (M). Model:    Temperature Model:    Humidity and temperature Filter:    Metal grid Coating:    without Scope of Supply - EE07-02 probe according to ordering guide - Inspection certificate according to DIN EN10204 - 3.1 HA010705 HA010819/20/21 HA0101xx HA010502 see data sheet EE-PCA - M12x1 flange coupling with 50 mm (2“) flying leads - Connecting cable M12x1 -...

 Open the catalog to page 2

All E+E ELEKTRONIK catalogs and technical brochures

  1. PRODUCT CATALOG

    292 Pages

  2. EE1950

    4 Pages

  3. EE310

    8 Pages

  4. EE10

    3 Pages

  5. EE071

    3 Pages

  6. humidity_calib

    1 Pages

  7. accessories

    8 Pages

  8. EE046

    2 Pages

  9. HVAC-Brochure

    8 Pages

  10. datasheet EE46

    2 Pages

  11. EE061

    2 Pages

  12. HCT01

    4 Pages

  13. EE431

    3 Pages

  14. EE441

    2 Pages

  15. EE451

    3 Pages

  16. EE461

    2 Pages

  17. EE471

    3 Pages

  18. EE10

    2 Pages

  19. EE08

    2 Pages

  20. EE07

    2 Pages

  21. EE04

    2 Pages

  22. EE060

    2 Pages

  23. EE03

    2 Pages

  24. EE02

    1 Pages

  25. EE210

    5 Pages

  26. EE160

    4 Pages

  27. EE-PCA

    2 Pages