Text version of the page 
Text version of the page 
E E The modular housing of the EE29/EE31 enables a fast and easy on-site adjustment and calibration. Using theoptional extension cable one can adjust or calibrate the entire measurement loop without interrupting the
measurement. No need for time-consuming dismounting and wiring of the instrument. This feature makes the
EE29/31 series suitable for use in regulatory environments (e.g. FDA, GAMP).
The adjustment of humidity and temperature (2 points or 1 point) is performed either with a simple routine
using two push buttons on the printed circuit board or with the configuration software. 2 2 LED LED Two status LEDs on the printed circuit board indicate the transmitter status and eventual errors, especially useful during installation or service operations. C C Operation in heavily polluted and/or corrosive environments is typical for many industrial processes and canlead to drift or damage of the humidity sensor and thus to false measured values. The unique protective
coating developed by E+E for the sensing probe brings a significant improvement on the long-term stability of
the transmitter in very dirty and aggressive environments. (ordering code: HC01) II D D The actual measured and calculated values as well as the corresponding Min/Maxvalues can be indicated on an optional display. The physical quantity to be display-ed is choosen with the push buttons on the housing. (ordering code: D05) II The interchangeable sensing probe with plug connection can be easily exchanged
in the versions D and E. The installation of the probe cable (up to 20m / 65ft ) is sig-nificantly simplified and can be installed prior to fitting the transmitter.(ordering code: P01) AA An optional alarm module with 2 relay outputs is available for control and alarm purposes. Theselection of the physical quantity for the relay ouputs and the setting of threshold and hysteresis can be easily made with the configuration software included in the standard scope of supply. II Apower supply, integrated in the back module of the housing, can be ordered
optionally (100...240V AC, 50/60Hz; ordering code V01). The power supply V01 is
available for both polycarbonate and metal housing and comes standard with two
plugs for supply and outputs to allow an easy connection. C C standard plug option C03 plug option C07 plug option C08 LumbergRKC 5/7 LumbergRSC 5/7 Lumberg
RKC 5/7 2x M16x1.5 Lumberg
RKC 5/7 Ysplitter* transmitter incl. alarm output: EE29: 2xM16 EE31: 3xM16 RS232 LumbergRSC 5/7 power supply+
analogue output power supply+
analogue output power supply+analogue output RS485network * Siemens 6ES7 194-1KA01-0XA0 EE2/EE 11
|