Text version of the page 
Text version of the page 
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | triaxial | | | | | | | | | | Model Number | | | | | | 3023A | | 3053B | | 3093B | | 3143D1 | | 3263A2T | | | | | | | | | | Sensitivity (mV/g) Full Scale Range for +/- 5V Output (g's) Frequency Range (Hz) Weight (grams) Temperature Range (°F) Options Available | | 10 (-10/+15%) 500 2 to 10000 3.0 -60 to +250 3023A1 (5-40 tapped hole) | 10 (+15/-10%) 500 2 to 5,000 7.2 -60 to +250 3053B1 (5mV/g), 3053B2 (10-32 mount) | | 100 (+15/-10%) 50 2 to 5,000 10 -60 to +250 3093B1 (10-32 mount) | | | | | | 100 (±5%) 50 .5 to 3,000 14 -60 to +250 3143D (10mV/g) | | 100 (±10°%) 50 1.5 to 10000 5.6 -60 to +250 3263A1T (10mV/g) | | | | | | | | | | | | | | | | | | | | | | shock ACCELEROMETERS | | | | | | | | | | The measurement of high shock (up to 70,000 g's) requires an accelerometer to have the following characteristics: high natural (resonance) frequency, rugged construction, small size. These elements are combined in the 3200B series of internally amplified high shock accelerometers from Dytran. Series 3200B is intended for mechanical shock measurement and (by virtue to its base isolated design) for pyroshock (shock induced by an explosive device). Six models in the 3200B series provide sensitivities of 2.0, 1.0, 0.5, 0.25, 0.1 and 0.05 mV/g, yielding full scale ranges of 2.5 Kg, 5 Kg, 10 Kg, 20 Kg, 50 Kg and 70 Kg, respectively. This series has an integral mounting stud machined as part of the housing. A top mounted 10-32 coaxial connector provides the electrical contact. The rugged compression design quartz sensing element in the 3200B series has a very high natural frequency (greater than 100 kHz) and is very durable. The 3200B series is electrically insulated from ground by means of an isolated base and is lightly filtered, making it suitable for pyroshock measurement to 20 kHz. A mild first order 6 dB/octave low pass filter is 5% down at 20 kHz, suppressing unwanted ringing. Standard mounting thread size for the integral mounting stud is 1/4-28; 10-32 thread (3200BT series) optional. The sensing element is a strain isolated quartz compression design. This configuration has proven to be very reliable and will continue to perform properly even when severely overranged. | | | | | | | | | | | | | | | | | | | | | | trtunuiMUNs: | | | | | | | | | | Model Number | 3200B | 3200B2 | 3200B3 | 3200B4 | 3200B5 | 3200B6 | | | | Sensitivity (mV/g) | .05 (±10%) | .1 (±10%) | .25 (±10%) | .5 (±10%) | 1.0 (±10%) | 2.0 (±10%) | | | | Full Scale Range (g's) | 70,000 | 50,000 | 20,000 | 10,000 | 5,000 | 2,500 | | | | Frequency Range (Hz) | 1 to 20,000 | 1 to 20,000 | 1 to 20,000 | 1 to 20,000 | 1 to 20,000 | 1 to 15,000 | | | | Weight (grams) | 6 | 6 | 6 | 6 | 6 | 6 | | | | Temperature Range (°F) | -60 to +250 | -60 to +250 | -60 to +250 | -60 to +250 | -60 to +250 | -60 to +250 | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | LIVM IMPEDANCE HEAD | | | | | | | | | | Model 5860B | | Accelerometer | | | | | | | | | | | | | | | | 100 (±10%) mV/LbF | | 100 (±2%) mV/g | | | | | | Sensitivity | | | | | | | | | | | | | | Frequency Response (+/-5%) | | depends upon load | | | | | | 1 to 8,000 | | | | | | | | | | | | | | | | | | Maximum Force/Acceleration | | ±100 LbF | | | | | | ±100 g | | | | | | | | | | | | | | | | | | 60 | | | | | | Weight (grams) | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | |
|