8820 Series Panel Mounted and Pressure Control Valves - Dynex - #1

/ 2


catalogue search
8820 Series Panel Mounted and Pressure Control Valves - Dynex
P. 01
8820 Series Panel Mounted and Pressure Control Valves - Dynex
P. 02
Pages:
8820 Series Panel Mounted and Pressure Control Valves - Dynex


See other catalogues for Dynex

Text version of the page
These direct-spring acting valves can be used for basic safety relief in low-flow applications or for remote control of larger pilot-operated valves in a circuit. SPECIFICATIONS Rated Flow Size 01 for Remote Pressure Control: Nominal, 0.75 U.S.gpm (2,8 L/min); Maximum, 1.0 U.S. gpm (3,8 L/min) Size 02 for Safety Relief: Nominal, 1.5 U.S. gpm (5,7 L/min); Maximum, 2.5 U.S. gpm (9,5 L/min) Rated Pressure All models, 5000 psi (350 bar) Pressure Adjustment Standard Pressure Range: 100 to 3000 psi (7 to 210 bar) HP Option: 100 to 5000 psi (7 to 350 bar) LP Option: 50 to 1000 psi (4 to 70 bar) LLP Option: 40 to 500 psi (3 to 35 bar) Pressure is manually set by turning the maximum pressure adjustment (standard knurled knob or optional handwheel). Turning clockwise increases pressure. The setting is held by a locknut. An optional cam operated version is available. Refer to the installation drawing and “Typical Model Code” on reverse side. REMOTE PRESSURE CONTROL The 01 Size valve can be used as a remote pressure source to control larger pilot-operated valves. The pressure setting for the main valve should be adjusted 5% higher than the pressure setting for the 8820 valve, to prevent interaction between the valves. High Pressure Hydraulics DYNEX ENGINEERING SPECIFICATIONS 8820 Series Panel Mounted 0.75 U.S. gpm (2,8 L/min) and Pressure Control Valves 1.5 U.S. gpm (5,7 L/min) nominal; 5000 psi (350 bar) 8820 Series Standard Knurled Knob 01 0.75 2,8 350 24 1.00 3,8 400 28 02 1.50 5,7 600 41 2.50 9,5 1100 76 . Crack to full flow at 3000 psi (210 bar). Size U.S. gpm L/min psi bar Flow ÄP. PRESSURE DROP (ÄP) APPLICATION NOTES Mounting Orientation: Unrestricted for all models. Standard Seals Fluorocarbon (Viton® or Fluorel®) Fluid Recommendations Viscosity: 50 to 1500 SUS (7 to 325 cSt) Temperature Range: -20° to +200° F (-29° to +93° C.) Filtration Use filtration to provide fluid which meets ISO cleanliness level 19/17/14 (ISO Code 4406) or cleaner. TO CIRCUIT PILOT-OPERATED RELIEF VALVE 8820 SERIES PANEL-MOUNTED REMOTE PRESSURE CONTROL VALVE P REMOTE CONTROL LINE

pageCatalog pdf di En 2012-05-22-29