Series TFXL: Compact Flow Meter, Intergral and Remote Models - Dynasonics - #1

Text version of the page

Series TFXL 800-535-3569 dynasonics.com FEATURES BENEFITS May be used to measure liquids with small amounts of suspended solids or aeration (e.g., surface water, sewage). Bi-directional flow measurement system. Totalizer options include forward, reverse and net total. ULTRALINK TM software utility (free download) enables in-field flow meter configuration, calibration and troubleshooting, via laptop PC. Compact enclosure uses large, easy-to-read digital display. Reduced material costs: clamp-on sensor eliminates the need for in-line flanges, pipe fittings, strainers, and filters. Reduced installation time: the TFXL may be installed and fully operational within minutes. No need to break into pipelines. Reduced maintenance costs: with no moving parts, there is nothing on the TFXL to wear down – no repair kits or replacement parts are needed. Easy retrofit: with 3 standard outputs (4-20 mA, TTL pulse, and simulated turbine frequency), the TFXL drops easily into existing DCS and flow monitoring systems. Reduced down-time: installation may be performed on full pipes. No need to shut the process down for installation or maintenance. CLAMP-ON ULTRASONIC FLOW METER FOR LIQUIDS The Series TFXL ultrasonic flow meter clamps onto the outside of a pipe and does not contact the internal liquid. This advanced product provides instantaneous rate and accumulated flows along with 4-20 mA and pulse outputs. Inherent advantages over competitive technologies include ease of installation, and a large, bi-directional measuring range. In addition, the non-contact design eliminates many fluid compatibility issues. The TFXL is housed in an enclosure suitable for outdoor mounting and is available with or without a local display. Compact integral mount systems can accommodate pipes/tubing 2 inches (DN 50 mm) and smaller. Remote mount systems are also available for pipe/tubing sizes ½ inch (DN 15 mm) and higher. A software utility is available for customer configuration and in-field calibration.