Modular Incremental Rotary Encoders MX15 - Duncan Electronics Division - #1

Modular Incremental Rotary Optical Encoder

MX15

Series

By the time you have read this first sentence, you could have installed BEI's model MX15 INSTA-MOUNT™ modular optical encoder. In addition to its quick and easy installation, the MX15 is designed to operate with jitter-free output signals without tight controls on shaft endplay, runout or perpendicularity. The new INSTA-MOUNT™ encoder is capable of operating within a temperature range of -10° to +70°C, requiring less than 30 milliamps of L.E.D. current, without degradation of output signals and is short circuit protected. The MX15 is perfectly suited for motor manufacturers and other high volume OEMs.

BEI's INSTA-MOUNT™ Series encoder offers 5V TTL compatible quadrature outputs with index and complements as options. Axial shaft movements during operation, of ±0.010", will not adversely affect the output signals. Shaft runouts of 0.005" TIR can also be absorbed by this device without affecting output signal performance.

• Resolutions to 1024 PPR

• Quick and easy installation

• Tolerant of axial shaft movement often associated with less expensive motors

• Jitter-free outputs

• Index options

• Increased MTBF (lower component count)

• 26LS31 line driver output from MX156

• High Frequency response

• 2-year warranty

(MX152/MX153)

75

06

OPTIONAL HEADER (H) MOLEX 22-23-2071

.40

OPTIONAL CABLE

TERMINATION

0 1.54

COVER BUTTON-

AIR GAP PIN HOLE

2K 0.120 THRU HOLE

(MX156)

Dimensions not shown, same as Figure 1

OPTIONAL HEADER (H)

DUPONT #67996-510

All dimensions in inches

.xx = ±.02 .xxx = ±.005

ISO9001 Certified_/QS9Q00 Compliant