9360 360° Non-contacting Dual Output Rotary Sensor - Duncan Electronics Division - #1

9360

360° Non-Contacting Rotary Dual Output Hall Effect Sensor

Series

The BEI Duncan 9360 Series rotary sensor is a non-contacting Hall effect device with 360° of rotation and dual outputs. This rugged design is ideally suited for infinite rotation applications where reli­ability and durability are a priority. The sensor provides absolute position at power on and offers two completely redundant outputs. The packaging is similar to other BEI devices and meets the severe durability requirements that are typical in off-highway and agricul­ture requirements. The new sensor incorporates a rotating Neodym-ium disk magnet that enables the sensing element to remain station­ary, improving both accuracy and reliability. This combination of magnet, sensor and sealed packaging offers excellent temperature stability and corrosion resistance. The sensor can be conigured for Analog (voltage) outputs or with a PWM output. These program-mability features are conigured at the factory and allow for greater flexibility in creating custom limited electrical angle outputs (i.e. 0-20 degrees for full scale) with short turnaround times.

Fully sealed, (meeting and/or exceeding IP66/IP67 standards) the 9360 is impervious to contamination and moisture. An integrally molded 6-pin connector makes a sealed connection with industry standard Packard Electric connector.

Provides improved accuracy and reliability

The standard sensor provides 0-359.9° electrical degrees. Multiple outputs with limited electrical angles up to 359.9° temperature compensation are also available

Provide excellent temperature stability and corrosion resistance

Allows for quick turn-around on custom electrical angles

IP66 / IP67, 6-pin I/O interface to Packard Electric Metri-Pack Pull-to-Seat 150.2 Series P/N 12162261 or P/N 12162260 connector

-40° to +85°C standard, -40° to +125°C available optionally

9360 XXX XX

|_ Temperature Rating: Blank = Standard +85°C HT = +125°C

^L Requested Electrical Angle: i.e. 090 = ±45° or 120 = ±60°

SAMPLE: 9360 090 .

L- Standard +85°C L-90° (±45°) Electrical Angle '—Infinite 360° Rotation Device

Maximum rotational speed limited to 300 RPM

M^^^M a company of] K^m—M Schneider

170 Technology Drive West Irvine, CA 92618-2401 (949) 341-9530 Fax: (949) 453-2700 email: sales@beiduncan.com www.beiduncan.com

ISO9001 & TS16949 Certified