PI0120-d-0801-A, MultiBasic - DSM - (Version JPG) - PDF Catalogue | Technical Documentation

See other catalogues for DSM

Torque gauge, Positioning controller, Nutrunner, Measuring system, Workstation

Text version of the page

DSM Tightening Control System MultiBasic TA

Programmable control unit with integrated servo controller for all DSM tightening tools of the DS series with indirect [CC] torque measurement

MultiBasic

The starter model into the EC tightening technique, the ideal tightening system for simple tightening operations.

Universal and flexible usable for manual work stations, automatic stations as well as multi-channel system solution.

^£(VCD

^^■«^ PC software

• 2,5 " LCD-Display with illumination

• LED status reports for torque and angle of rotation I < ILeJ—

• Function keys

• Programming and parameterisation via PC software

• Freely programmable tightening operations

• 32 programs / subroutines available

• 50 instructions per program possible

• Digital measuring signal processing

• Automatic self test of the tightening control system and of the nutrunner

• Mobile long-term memory 1 28 MB up to 1 GB [compact flash card) as backup and production memory

• Ring buffer for 500 measurands

• Parameter and program backup in EEPRDM

■

Operatine] Mode MultiBasic TA

Interconnecting cable

MultiBasic

- Contro) module

- Beaic module

series CC

Start/ stop -outrunner

, Program start

A inputs [SAV] - A PG. 7 PG (BCD)

roepectrvety free

available Status outputs fc.

upply

A outputs [SAV]

- Ready. OK. NOK. PG ready respecowety free available

C^ara^^^^^.

- Parameter, programs, detae

Interfaces _w

^Prwer^C^^^^

system bus, PB, TCP

Permanent measurements

i >

Torque »

Angje^frogcion Automatic''

Interfaces and accessory

► ► Backside

parametensati on'


1 : Trie parameters of tl	lenutnj me, ars ,rn	ported by system start

Intearated servo controller fbasic module! 1
Type of nutrunner	Basic module	Mains voltage
DS26	□ S-S	230V/50HZ	1 15 V/ 60 Hz
DS 34/ DS 44	DS-L	S3QV/50HZ	115V/BOHz
□ S57	DS-H	230V/50 Hz	115V/BOHz
□S80	□s-v	3X400VAC /5DHZ
DSH 34/DSH44	DS-LH	230V/50HZ	1 15 V/BO Hz

• Power supply of the control module and of the tightening tool

• Servo motor control and monitoring

• Electrical activation of the servo motor with monitoring of max. motor current, max. temperature and cable break

Tightening conerò! system MultiBasic [control module)

Technical datas

► ► Back side

Success By Quality.

Phone +49 (O) 7361 571 7 O

Fax *43(0)7361 5717 33

E-Mail ¡nfo@dsrn-messtechnik.de Web www.dsm-messtechnik.de



	Tiahteninq control svstem MultiBasic TA 1

	Size of case	201 x 280x231 (128*) mm (WxHxO)
	Weight of the units	about 6,5 kg -1 2 kg
	Protection class	IP4Q (optional IP 54)
	Mams voltaqe	depending on the servo controller
	* servo controller DS-S Type 1

DSM Messtechnik GmbH

PI0120-d-0801-A, MultiBasic - DSM - #1

Torque gauge, Positioning controller, Nutrunner, Measuring system, Workstation