PI0110-d-0711-A, MultiClassicTA - DSM - (Version JPG) - PDF Catalogue | Technical Documentation

See other catalogues for DSM

Torque gauge, Workstation, Controller, Press, Force sensor

Text version of the page

DSM Tightening Control System MultiClassic TA

Programmable control unit with integrated servo controller for all DSM tightening tools of the DS series with direct fTQA] or indirect [CC] torque measurement

MultiClassic

The ideal tightening system for simple tightening operations as well as for high-precision tightening connections.

Universal and flexible usable for manual work stations, automatic stations as well as multi-channel system solution.

(VCD

^^■^ PC software

• 2,7" LCD display with illumination

• LED status reports for torque and angle of rotation i < n = i^M

• Function keys

• Programming and parameterisation via PC software

• Freely programmable tightening operations

• 1 2B programs / subroutines available

• 1 □□ instructions per program possible

• Digital measuring signal processing

• Classification of the torque measurement acc. to VDI/VDE 2862

• Traceable calibration

• Automatic self test of the tightening control system and of the nutrunner

• Mobile long-term memoryl 28 MB up to 1 GB [compact flash card) as backup and production memory

• Ring buffer for 1 □□□ measurands

• Parameter/program backup in EEPRDM

■

Operatine] Mode MultiClassic TA

Interconnecting csble

senes

MufàClBssìc

- Control module

- Bas'C module

Start / stop

•outrunner

, Power supply

Permanent measurements

< >

Torque »

, Program start

A inputs [SAV¡ - A PG. 7 PG (BCD)

roepeccrvey freo

available Status outputs fc.

A outputs [SAV]

- Ready. OK. NOK. PG ready respecovety free available

C^aro^^^^^.

- Parameter, programs, dates

Interfaces _w

system bus, PB, TCP

An^je^froTgcion

Automatic''

Interfaces and accessory

► ► Backside

páramete risati on'


1 : Trie parameters of tl	lenutnj me, ars ,rn	ported by system start

I Intearated servo controller [basic module! 1
Type of nucrunner	Basic module	Mains voltage
DS26	□ S-S	230V/50HZ	1 15 V/ 60 Hz
DS 34/ DS 44	DS-L	S3QV/50HZ	115 V/ BO Hz
OS 57	DS-H	230V/50 Hz	115V/BOHz
□S80	QS-V	3 X 4QOVAC /50Hz
DSH 34/DSH44	DS-LH	230V/50HZ	115V/BOHz

• Power supply of the control module and of the tightening tool

• Servo motor control and monitoring

• Electrical activation of the servo motor with monitoring of max. motor current, max. temperature and cable break

Tightening control system MultiClassic [control module)

Technical datas ►► Backside

Success By Quality.

Phone +49 (O) 7361 571 7 O

Fax *43(0)7361 5717 33

E-Mail info@dsm-messtechnik.de Web www.dsm-messtechnik.de



	Tiahtenina control svstem MultiClassic TA I

	Size of case	201 x 280x231 (128*) mm (WxHxO)
	Weight of the units	about 6,5 kg -1 2 kg
	Protection class	IP4D (optional IP 54)
	Mams voltaqe	depending on the servo controller
	* servo controller DS-S Type I

DSM Messtechnik GmbH

PI0110-d-0711-A, MultiClassicTA - DSM - #1

Torque gauge, Workstation, Controller, Press, Force sensor