Visit our web site at www.dseurope.com
(very convenient prices)
LP 665-2
LP 665-2LP 664-4
LP 668-4 Measuring ranges: Internal electr. 0 to 1 - 2 - 5 - 10 - 20 - 50 - 100 - 200 - 400 - 600 bars. (LP 650 Series, measuring ranges: up to 1400 bars).Hydraulic connections: G
1 /
4 ” or G
1 /
2 ”.
Electrical connection: by connector (central hole for zero regulation). Model N. of wires SupplyOutputModelInternal electr. N. of wires SupplyOutput LP665Voltageamplifiers30 to 12 Vto 36 V0 to 5 V0 to 10 VLP661LP664Current amplif.Digital2 0 to 8 up 36 V4 to 20 mALP668
LP669 Outputs: RS485 and RS422 (DSEbus, Modbus)Outputs: CAN (CANopen DSP406, DEVICENET)
PC SERIES: MAGNETOSTRICTIVE; one or two cursors or floats.
Measures of: position; velocity; level.
Measuring strokes: PC Series
Strokes from 100 mm to 3 meters from 100to 1000 mm.: intervals of 50 mm.
from 1000 to 3000 mm: intervals of 100 mm. PCR: displacement rule. PCS: standard with screwed electronic head. PCP: with probe extraction from the well , screwed to the reservoir. PCM: with miniaturised measuring probe.
Main specifications: no electrical contact between fix probe and cursor orfloat: no frictions, no wears. Operating probe pressure: 350 bars (700 max.).
Digital technology. Outputs: 0÷10V, 4-20mA, RS485, CAN open, Start Stop, SSI. Applications: for oil and air actuators and pistons, on operatingmachines, for level measures on reservoirs (see also Smartank)
AN401 PlusPCRPCSPCP SP Series LVDT
Strokes: ±2,5 ÷±100 mm Measuring strokes: ±2,5; ±5; ±12,5; ±25; ±50; ±100 mm.Non linearity: < ±0,2 % fs.Resolution: infinite.
AN 401
EL 546 Main specifications: •no mechanical contact between fix and movable parts: no frictions, no wears.
•external surfaces and side boards: in stainless steel.
•central tube for the sliding core: in stainless steel.
•extremely robust and environment protected.
•high number of coil turns: to warranty a linear signal without jumps.
SP DEVELOPMENT AND MANUFACTURING OF CUSTOM PRODUCTS
DS Europe technical department, with 30 years experience, can develop products accordingly tocustomers’ technical specifications with the following tools:•3D mechanical design
Cad software stations.•Finite Element Analisys
Fea software stations.
•Digital and analog electronic development accordingly to EMC (= CE) stricter industrialmarking regulations (with tests in anecoic room at Competent Body third party laboratory).•Software and embedded firmware development accordingly to most popular industrial bussystems (CANopen, Modbus, PROFIBUS etc.)•Fast prototyping.DS Europe develops new products or modifies existing ones in order to realize the fittest and moreconvinient product. Specifications and prices may change without notice.Bulletin:170105-E