Calibration Handpump LR-Cal LPP 30 (35 bar) - DRUCK & TEMPERATUR Leitenberger - #2

Text version of the page

Calibration Test Pump LPP 30 (pneumatic) LPP 30 Pressure-/Vacuum-generation !28 in Hg...+500 psi DRUCK & TEMPERATUR Leitenberger GmbH Bahnhofstr. 33 C D-72138 Kirchentellinsfurt C Germany Tel.: +49-7121-90920-0 C Fax: +49-7121-90920-99 E-Mail: DT-Export@Leitenberger.de C http://www.druck-temperatur.de Technische Änderungen vorbehalten. Freibleibend C (Rel. 101006) • All technical modifications reserved. Without engagement Order-Codes: Description Order Code LPP 30 Calibration Test Pump -0,95...+35 bar (-28 in Hg...+500 psi) NOTE: if you dismount the reference connector, you get 3/8" BSP female port LPP-30 ditto, but reference port 1/4" BSP female rotating LPP-30-G14 ditto, but reference port and test port 1/4" NPT female LPP-30-N14 Set of BSP adapters and set of seals 1/8" BSP, 3/8" BSP and 1/2" BSP LPP-ADAPTER-BSP Set of metric adapters and set of seals M12x1,5 M20x1,5 and Minimess® LPP-ADAPTER-M Set of NPT adapters 1/8" NPT, 1/4" NPT, 3/8" NPT, 1/2" NPT LPP-ADAPTER-NPT Carrying case with foams LPP-KOFFER LPP-MANO analogue reference gauge DS 63 ±1% FS, 0 ... 2 bar and 0 ... 30 PSI - fine graduation LPP-MANO-0002 ditto, but range 0 ... 11 bar and 0 ... 160 psi LPP-MANO-0011 ditto, but range 0 ... 25 bar and 0 ... 365 psi LPP-MANO-0025 ditto, but range 0 ... 40 bar and 0 ... 600 psi LPP-MANO-0040 ditto, but range -1 ... 0 bar and -30 ... 0 inHg LPP-MANO-0000 ditto, but range -1...+39 bar and -30 in Hg ... +580 psi Spare part: Test tube with 1/4" BSP female port LPP-SCHLAUCH Spare part: Fine adjustment valve with relief valve LPP-VENTIL Service Kit for LPP 30 (O-rings, seals, etc.) LPP-WARTUNG NOTES: To mount the reference instruments • LPC 300 - LPC 200 - TLDMM - TLDMM-A01 - TLDMM-A02 - TDMC - LPP-MANO you do not need any adapter if you use the calibration handpump type LPP-30. (1) pressure port 1/2" BSP female rotating for reference (1/4" NPT female at type LPP-30-N14) (1/4" BSP female rotating at type LPP-30-G14) (2) fine adjustment valve (3) pressure/vacuum relief valve (4) change-over switch for pressure/vacuum generation (5) handles (6) adjustable knurled nut for adjustment of delivery rate (7) pressure port 1/4" BSP female rotating for unit under test (1/4" NPT female at type LPP-30-N14) (8) test tube