PRM pump
3Pages

{{requestButtons}}

Catalog excerpts

PRM pump - 1

MATERIAL: CAST IRON ALUMINIUM BASE EASY FLOW-RATE CONTROL PUMP TESTED FOR USE WITHOUT LUBRICANT FOR "50" HOURS SUCTION HEAD 0.5 M WITH OIL 15 CST INTERCHANGEABLE WITH THOSE WHICH ARE COMMERCIALLY AVAILABLE THE ROBUST PUMP FOR THE LUBRICATION OF AGRICULTURAL MACCharacteristics HINERY CHAINS Cost reduction with automatic lubrication The PRM is a multi-point piston pump operated by a cam system and designed to feed several independent lines up to a maximum of 12 outlets. Characterised for its robustness and reliability, it is particularly suitable for lubricating systems installed in difficult environments. The pump is designed to supply single-point lubrication systems in agricultural machinery and various kinds of machinery for use with oil. The "PRM" pump is designed to operate with a maximum of six pistons, which are easily adjustable on 12 outlets. The pump is designed for merging outlets (to be defined during the order phase); the same will be provided directly to the merged outlets according to your specifications. Merging the two outlets will allow for the nominal flow rate of a single outlet to be doubled. Being available in different versions to choose from depending on the reduction ratio necessary, there are also variants with a flange. ADVANTAGES − Improves machinery reliability − This reduces maintenance costs. − Avoid downtime − Save on lubricant − The reservoir can be connected above or below the pump, up to 0.5 metres. − The PRM can run without lubrication up to 50 hours without seizure in the event of failure to refill the reservoir. − The pump is available in various reduction ratios allowing greater flexibility of use depending on the type of application. COMBINE HARVESTERS ROUND BALERS DISC MOWERS − The regulation of the flow rate of the single piston can be performed simply and rapidly. − The regulation of the piston and the flow rate is aligned with the outlets. − The outputs can be excluded following a procedure − The PRM is reversible, meaning that it can operate independently of the direction of rotation of the mechanical drive. − The high level of the pump’s robustn

Open the catalog to page 1
PRM pump - 3

PRM ORDER INFORMATION 1. CHOOSE A MODEL DESCRIPTION HOW TO ORDER? SHAFT TYPE Example: If you need the version with the 25:1 compression ratio and two merged outlets, to generate your code, please proceed as follows: Reduction ratio 8:1 - reduced Reduction ratio 8.75:1 with flange PART NUMBER Select the part number of the model, in this case, 0145201 If you need to merge the outputs "N", continue by completing the table below indicating one (merged outputs) in columns G, H, I, L, and M, write 0 The generated code for the order will be 0146201-000001 DEFINE THE OUTPUTS TO BE MERGED OUTPUTS TO...

Open the catalog to page 3

All Dropsa spa catalogs and technical brochures

  1. FEMTO Pump

    5 Pages

  2. DRAGON X

    4 Pages

  3. SMART 3

    4 Pages

  4. OMEGA pump

    4 Pages

  5. Dragon X

    4 Pages

  6. Locopump S3

    2 Pages

  7. SUMO II ATEX

    3 Pages

  8. C2248P

    4 Pages

  9. MaxClean

    1 Pages

  10. Mini-SUMOII

    4 Pages

  11. MaXtreme

    6 Pages

  12. C2175P

    2 Pages

  13. MiQueLEXT

    4 Pages

  14. SMART OIL 2

    1 Pages

  15. PoliPUMP-Eco

    2 Pages

  16. MaXtreme Oil

    2 Pages

  17. C2204P

    4 Pages

  18. LocopumpS2

    2 Pages

  19. C2045PE

    2 Pages

  20. CannonPump

    2 Pages

  21. PoliPUMP FP

    4 Pages

  22. Magnom CP

    2 Pages

  23. Smart Oil

    1 Pages

  24. Dropsa BLUE

    1 Pages

  25. VIP4 ToolsPro

    10 Pages

  26. AIR/OIL SMX

    4 Pages

  27. Piccola

    2 Pages