Catalogs >
Dropsa spa >
Drain Reservoir

Drain Reservoir
2Pages

Catalog excerpts

DRAIN RESERVOIR Hydraulic Cylinder Gland Drains Cylinder seal life depends on many conditions. One of these conditions is the cylinders work cycle. Hydraulic cylinder with large rod diameter, long strokes and high cycle rates will eventually have seal wear. Because of seal wear many end users have specified that cylinders have gland grain porting. When this port is piped to the gland reservoir any leakage will be captured. This port is located between the rod seal and the rod wiper. A hydraulic cylinder may have a small amount of hydraulic oil that escapes part the rod seal during a “start up” period. The gland drain reservoir will capture this leakage as well. Other Drain Applications Gland Drain Reservoir – Benefits OSHA requires that work environments have dry floors. When a cylinder has a gland drain port piped to a reservoir it will keep the floor oil free. Reservoir capacity: 3 liters Inlet drain ports: 1/8” UNI ISO 228/1 Two way valve: 3/8” UNI ISO 228/1 If the end user has a preventative maintenance plan a gland drain reservoir becomes an important part of the equipment. The gland drain reservoir allows a visual or electrical indication of seal wear. Each drain line coming back to the reservoir identifies the cylinder that it is piped to. Any excess leakage can be noted and repairs can be planned. The drain reservoir can be used for many applications were there is a need to capture a fluid. Ordering information Part No. Standard version, without high level switch Special version, with high level switch The gland drain reservoir eliminates cylinder leakage from entering areas such as coolant, water or other oil systems. The gland drain reservoir can help maintain the integrity of the hydraulic systems. When the reservoirs are used the oil can be disposed of properly or recycled for future use. Automatic lubrication systems WK 29/01

Open the catalog to page 1

DRAIN RESERVOIR Description Reservoir 3 liters Cover Raccordo con filtro sinterizzato Two way valve High level contact (only for 3044328) Hub G 1/8” UNI ISO 228/1 ITALIA Dropsa SpA t. +39 02-250791 f.+39 02-25079767 CHINA Dropsa Lubrication Systems (Shanghai) Co., Ltd t. +86 (021) 67740275 f. +86 (021) 67740205 U.K. Dropsa (UK) Ltd t. +44 (0)1784-431177 f. +44 (0)1784-438598 U.S.A. Dropsa USA Incorporated t. +1 586-566-1540 f. +1 586-566-1541 GERMANY Dropsa GmbH t. +49 (0)211-394-011 f. +49 (0)211-394-013 AUSTRALIA Dropsa Australia Pty t. +61 (02)-9938-6644 f. +61 (0)2-9938-6611 FRANCE...

Open the catalog to page 2

Drain Reservoir 2Pages

Catalog excerpts

All Dropsa spa catalogs and technical brochures

Drain Reservoir
2Pages