Catalogs >
Dropsa spa >
Dividers- DM-Modular valve

Dividers- DM-Modular valve
6Pages

Catalog excerpts

MODULAR DUAL LINE VALVE CHARACTERISTICS LUBRICANT: OIL / GREASE ATEX CE EX II2 GD MARKING BASE THREADS INLETS: BSP AND NPTF 2 VERSIONS: NORMAL: ADJUSTABLE DELIVERY ON TURRET VERSATILITY IN LUBRICATION LAYOUT PLANNING FLEXIBILITY TO EXPAND OR REDUCE THE NUMBER OF ELEMENTS TO MEET CHANGING REQUIREMENTS BLANKING PLATES CAN BE PROVIDED TO ACCOMMODATE FUTURE REQUIREMENTS SAVE ON LABOUR AND PIPING COSTS: THE DUAL LINE LUBRICATION DIVIDER VALVES The modular Dual Line systems are designed of two main parts: the Base and the Metering Valves. All modular dual line elements and bases are made with anti-corrosion treatment, in nickel plated or in SS 316. Available with BSP or NPTF inlet and outlet tread. The Metering Valves can be supplied with adjustable or fixed discharge. The Valves with adjustable discharge are fitted with turrets provided with integral adjusting screws together with a metacrylate cover and seal. A 'blanking plate' to be ordered separately, can be provided on the base to accommodate future additional points. The Dual line elements now marked with a new laser marking system directly on the Nickel Plated element indicate the following information: - ATEX CE Ex II2 GD Marking Single and Dual Outlet configuration information and Output values in cm3 and Cu.inch Part Number and Work Order Production (batch) identification. APPLICATION EXAMPLE METERING VALVES CAN BE SERVICED WITHOUT DISTURBING THE ASSEMBLY OR EXISTING PIPEWORK LOWER MAINTENANCE COSTS: THE MODULAR CONCEPT PROVIDES LOWER COST REPLACEMENT COMPONENTS. REDUCED SPARE PARTS, FEWER PARTS IN STOCK= LOWER INVENTORY COSTS AP PLICA TIONS PAPER MACHINES Directional valve STEEL PLANTS CEMENTS WORKS COKE PLANTS LARGE CRANES AND LOADING EQUIPMENT Directional valve

Open the catalog to page 1

MODULAR DUAL LINE VALVE INFORMAZIONI TECNICHE Temperature Frequency Max .Pressure (inlet) Lubricants Base threads Flow rate Fixed Adjustable TECHNICAL CHARACTERISTICS 22 °F ÷ 176°F (-30 °C ÷ +80 °C) 100 cycles/minute. 5800 psi (400 bar) Min. Viscosity.:100 cSt Max Grease.: 265 ASTM (NLGI 2) Inlet: 3/8” BSP o 3/8” NPTF. Outlet: 1/4” BSP o 1/4” NPTF. DMMF-DMF-DBP-DMMXF-DMXF-DMGXF-DBPX DMM - DM - DMG- DMG1 - DMG2- DBP-DMMX-DMX-DMGX-DMGX1-DMGX2-DBPX Many possible configurations can be achieved by mounting different types of intermediate bases. The example on the right shows a typical...

Open the catalog to page 2

MODULAR DUAL LINE VALVE PRE – ASSEMBLED VALVE ORDERING MODULE DM- DMM VALEVS WITH TURRET - ADJUSTABLE FLOWRATE FLOWRATE cm³(cu.in) DMF AND DMMF VALVE WITHOUT TURRET – FIXED FLOWRATE FLOWRATE n. cm³(cu.in) OUTPUT

Open the catalog to page 3

MODULAR DUAL LINE VALVE CONFIGURATION INFORMATION IN FEW STEPS YOU CAN COMPOSE DIFFERENT KIND OF MODULES AS YOU NEED: Blanking Plate as an alternative to the valve DMMX DMX DMMFX DMFX NICKEL PLATED Blanking Plate INLET BASE INTERMEDIATE BASE Threaded insert VALVES 6. SCREWS Ordered separately only for DM-DMM-DMF-DMMF models * Sold in boxes of 500 or add the “-1” suffix for purchasing in single multiples DESCRIPTION Dual Line Bases Assembly screws Dual Line Bases threaded Inserts Dual Line Elements Assembly Screw Washer for Dual Line Element Base and Element Kit (2 Element Assembly Screw for...

Open the catalog to page 4

MODULAR DUAL LINE VALVE TUBING AND FITTINGS FITTINGS ASSEMBLY DESCRIPTION PLUG BSP PLUG NPTF CHECK VALVE BSP CHECK VALVE NPTF PLUG BSP PLUGNPTF TUBE Ø10 TUBE Ø12 TUBE Ø16 NUT Ø10 NUT Ø12 NUTØ16 RING Ø10 RING Ø12 RING Ø16 3/8“ CONNECTOR Ø10 3/8“ CONNECTOR Ø12 3/8“ CONNECTOR Ø16 3/8“ CONN’TR STEEL Ø10 3/8“ CONN’TR STEEL Ø12 3/8“ CONN’TR STEEL Ø16 TUBE Ø6 TUBE Ø8 TUBE Ø10 NUT Ø6 NUT Ø8 NUT Ø10 RING Ø6 RING Ø8 RING Ø10 ¼” CONNECTOR Ø6 ¼” CONNECTOR Ø8 ¼” CONNECTOR Ø10 ¼” CONN’TR VITON Ø6 ¼” CONN’TR VITON Ø8 ¼” CONN’TR VITON Ø10 NICKEL PLATED TURRET COVER Material Transparent Plastic Transparent...

Open the catalog to page 5

MODULAR DUAL LINE VALVE HOW TO CONVERT FROM ONE AT 2 OUTLETS 2 OUTLETS The valves are arranged for 2 free outlets. NOTE For series DMG2 only: remove the adapter Part no. 675515 and gasket Part no.675506 and replace with Part no. 675516. To convert to a single outlet: • Undo the fixing screws • Turn over the element and remove the 2 inner small O-rings (part no. 18889) • Fit the element back in place IMPORTANT: Remember to plug off the redundant outlet. Use Plug part no.926001 (UNI-ISO) or Part no. 850304 (NPTF). COMPLETED MODULE EXAMPLE Info Distributor: Dropsa products can be purchased...

Open the catalog to page 6

Dividers- DM-Modular valve 6Pages

Catalog excerpts

All Dropsa spa catalogs and technical brochures

Dividers- DM-Modular valve
6Pages