ATEX NICKEL PLATED MODULAR PROGRESSIVE DISTRIBUTOR SMO-SMX
8Pages

{{requestButtons}}

Catalog excerpts

ATEX NICKEL PLATED MODULAR PROGRESSIVE DISTRIBUTOR SMO-SMX - 1

SMX/SMO CHARACTERISTICS − THREE TYPES OF THREADING AVAILABLE: BSP, NPTF, SAE − SMX: UP TO 500 BAR SMO: UP TO 400 BAR − OIL AND GREASE FUNCTION − CE AND ATEX MARKINGS − BASES ALWAYS SUPPLIED WITH STANDARD SEALS AND MOUNTING SCREWS − THE TWO OUTPUTS ARE COMBINED BY SUBSTITUTING THE ADAPTER. − EXHAUST-AIR VALVES INCORPORATED IN BOTH SIDES OF THE BASE − SAFE AND CONTROLLED LUBRICATION − EASY AND FLEXIBLE ASSEMBLY WITH LOW MAINTENANCE COSTS − POSSIBILITY OF REPLACING THE METERING ELEMENTS WITHOUT BLOCKING THE PIPEWORK SMX/SMO MODULAR PROGRESSIVE DIVIDERS The SMX/SMO modular dividers are capable of guaranteeing precise lubrication while maximising the efficiency of lubrication systems. The divider consists of two main parts: - THE BASE (consisting of a minimum of three elements) - THE METERING VALVES (available with both a single outlet as well as a double one). To maximize the performance of the plant, it is crucial to use electrical monitoring elements that detect malfunctioning or system blockage. Thanks to its modularity, the system can be easily expanded and replacement of metering elements can occur without removing the pipework, thereby guaranteeing low maintenance costs. The modularity of the dividers furthermore allows you to bundle lubrication points according to system requirements. The modular system consists of two main components: the base and the metering elements. The modular progressive divider is available in two sizes: SMO: Miniature (Mini) SMX: Standard GENERAL CHARACTERISTICS FOR LUBRICANTS AND MAXIMUM OPERATING PRESSURE: SMX GREASE NUMBER OF STROKES/MINUTE EP type - without a thickener Viscosity between 000 ÷ NLGI 2 Max. 500 for the dosing element without a sensor, oil viscosity max. 220 cSt For the dosing unit with a sensor, see section 1.2.8 EP type - without a thickener Viscosity between 000 ÷ NLGI 2 Max. 300 for the dosing element without a sensor, oil viscosity max. 220 cSt For the dosing unit with a sensor, see section 1.2.8 OPERATING PRESSURE Note: the pressure is directly proportional to the number of strokes The value of viscosity for oil and grease are always linked to the operating temperature TECHNICAL INFORMATION OIL 32 CST VERSION APPLICATIONS − ANY OIL AND GREASE LUBRICATION SYSTEM HIGH PRESSURE NPT OUTLET GREASE NLGI (*) VITON O-RING (*) The value of viscosity for oil and grease are alw

Open the catalog to page 1
ATEX NICKEL PLATED MODULAR PROGRESSIVE DISTRIBUTOR SMO-SMX - 2

SMX/SMO THE BASES THE BASE CONSISTS OF A MINIMUM OF THREE ELEMENTS. INITIAL, INTERMEDIATE AND FINAL BASE For assembling, it is essential to know the number of outlets required to lubricate the system in order to identify the number of useful elements. The screws are not included; it is recommended that you buy the BASE AND ELEMENT ASSEMBLY KIT (part number 3140857 composed of no. 3 screws for the assembly of the base- no. 3 threaded grub screws - no. 2 screws for the elements) If you do not have special requirements, it is possible to order assembled bases that are already mounted (see p....

Open the catalog to page 2
ATEX NICKEL PLATED MODULAR PROGRESSIVE DISTRIBUTOR SMO-SMX - 3

SMX/SMO DIMENSIONS SMX DIMENSIONS 1/4 BSP outlet Type Centre to Centre to centre centre distance of distance of the fixing the fixing holes [mm] holes [inches] Total lenght [inches] Centre to centre distance of the fixing holes [mm] Centre to centre distance of the fixing holes [inches] Total length Total length [mm] [inches]

Open the catalog to page 3
ATEX NICKEL PLATED MODULAR PROGRESSIVE DISTRIBUTOR SMO-SMX - 4

SMX/SMO APPLICATION EXAMPLES DIVIDER ELEMENT VERSION TYPE OF DIVIDER ELEMENT Standard version ideal for the majority of oil and grease installation and Air/Oil lub. systems. Metering elements designed for installations with lubricants (grease) with solid additive (e.g. graphite, copper or silicone). L version has a particular clearance between the piston and the metering element body which allows the passage of the thick particles which won’t be possible with the standard version. Metering elements for high pressure oil installations where there could be high counter-pressure at the...

Open the catalog to page 4
ATEX NICKEL PLATED MODULAR PROGRESSIVE DISTRIBUTOR SMO-SMX - 5

BRIDGEVALVE Thanks to the bridge plates, it is possible to transfer the flow rate of one metering valve to the next one. Must be sorted based on the output side you want to add. There are three types of divider bridges, which coincide with the outlet: right bridge, left bridge or right/left bridge The side of the bridge and reported directly on the piece with an arrow, indicating the output connected to the next. For mounting position the bridge over the base and using the two screws supplied with the bridge element for attaching everything. IMPORTANT: plug the outlets corresponding to the...

Open the catalog to page 5
ATEX NICKEL PLATED MODULAR PROGRESSIVE DISTRIBUTOR SMO-SMX - 6

DEVICE TO MERGE OR TO SEPARATE OUTLETS It is possible to add the two flow rates of a single element by substituting the adapter, Part Number 641709, with the adapter, Part Number 641708, as illustrated in the drawing below. When the two outlets are connected, remember to close off the one that is not being used with a plug. The tightening torque of these adapters to ensure the seal and dismantling should be 0.8-1 Kg m (8-10 Nm). When the two outlets are connected, remember to close off the one that you do not want to use with a plug. 0641708 Single outlet adapter MONITORING DEVICES VISUAL...

Open the catalog to page 6
ATEX NICKEL PLATED MODULAR PROGRESSIVE DISTRIBUTOR SMO-SMX - 7

SMX/SMO m MICRO-SWITCH Adapter only: Only MICRO-CONTACT N.A. magnet control only Part number 1655059 Change over control only DISTRIBUTOR WITH INDICATING PIN ”C” DISTRIBUTOR DISTRIBUTOR WITH PIN WITH PIN AND AND CHANGE N.O. REED OVER REED SWITCH SWITCH ”GC” ”GXC” DISTRIBUTOR WITH N.O. REED SWITCH ”CC” DISTRIBUTOR COMPLETE WITH CHANGEOVER REED SWITCH ”GX” DISTRIBUTOR WITH MICRO SWITCH ”CT” THE PART NUMBERS REFER TO THE DIVIDER ELEMENTS (8) UltraSensor 2 Ultrasensor 2 was designed to replace systems with inductive proximity sensors, mechanical micro-switches, and the magnetic contacts that...

Open the catalog to page 7
ATEX NICKEL PLATED MODULAR PROGRESSIVE DISTRIBUTOR SMO-SMX - 8

SMX/SMO ACCESSORIES Ultrasensor connector Sealing disc (with central extraction hole) Check valve, outlet M 1/4 NPTF - F 1/4 BSP reducer fitting M 1/8 NPTF - F 1/8 BSP reducer fitting M 1/4 BSP - F 1/4 NPTF reducer fitting M 1/8 BSP - F 1/8 NPTF reducer fitting Screws for assembling the base Threaded grub screws Screws for assembling the elements Single outlet adapter ELEMENT AND BASE ASSEMBLY KIT (No. 3 screws for the assembly of the base- no. 3 threaded grub screws - no. 2 screws for the elements - no. 1 single outlet adapter) * Order separately - (sold in 500 pc. boxes or can be...

Open the catalog to page 8

All Dropsa spa catalogs and technical brochures

  1. FEMTO Pump

    5 Pages

  2. DRAGON X

    4 Pages

  3. SMART 3

    4 Pages

  4. OMEGA pump

    4 Pages

  5. Dragon X

    4 Pages

  6. Locopump S3

    2 Pages

  7. SUMO II ATEX

    3 Pages

  8. C2248P

    4 Pages

  9. MaxClean

    1 Pages

  10. Mini-SUMOII

    4 Pages

  11. MaXtreme

    6 Pages

  12. C2175P

    2 Pages

  13. MiQueLEXT

    4 Pages

  14. SMART OIL 2

    1 Pages

  15. PoliPUMP-Eco

    2 Pages

  16. MaXtreme Oil

    2 Pages

  17. PRM pump

    3 Pages

  18. C2204P

    4 Pages

  19. LocopumpS2

    2 Pages

  20. C2045PE

    2 Pages

  21. CannonPump

    2 Pages

  22. PoliPUMP FP

    4 Pages

  23. Magnom CP

    2 Pages

  24. Smart Oil

    1 Pages

  25. Dropsa BLUE

    1 Pages

  26. VIP4 ToolsPro

    10 Pages

  27. AIR/OIL SMX

    4 Pages

  28. Piccola

    2 Pages