Text version of the page

INDUSTRIAL-STROBOSCOPE DRELLOSCOP 1090 Visual qualitycontrol in the steel

DRELLOSCOP 1090.For the visual quality control of thesurface of cold-rolled sheet metal onskin-pass stands, as well as of tinned, galvanized or coated sheet metal in the steel industry. Picture: Application on a control stand with mirrors.

industry.

The DRELLOSCOP 1090 is uni-versally applicable for thevisual representation ofperiodically repeating surface defects. The sturdy design allows forcontinuous operation of the unit. DRELLOSCOP1090

DRELLOSCPOP 1090Highest light intensity with two lamps Special fields ofapplications

Highest light intensity for

for continuous operation.

J Use on skin-pass stands.
J Inspection of the surface oftinned, galvanized or coated sheet metal. continuous operation. No foreign ventilationnecessary for thehigh-duty quartz-glass ✚ Developed for the steel industry. The DRELLOSCOP 1090 consists of a supply unit, a separate control unit with cable connection for the remote control of all functions, as well as of two wide-beam high-power lamps. The single components are of splash-proof design (protection class IP 54).
J Visual final control of the strip surface on rewinders and slitters. ✚ Manual or externall synchronisation.
J flashtubes.Consequently nopollution of the lamps interior and theflashtubes by oil or Manually with the control unit (internal control). Externally through a DC voltage from 0...10 V proportional to the stripspeed respectively through a control current from 0...20 mA. Visual representation of surface defects, e.g. : ✚ Automatic limitation of the flash frequency.
J periodically repeating roller marks in order to protect the supply unit and the quartz-glass flashtubes of the lamps against overload.
J chatter marks
J ✚ Large 7 segment LED display in min scale coatings
J emulsion dropsEven with very high stripspeeds the short flash durationof the DRELLOSCOP 1090 allows for a detailed fault detectionand classification.
-1 or s
-1 . dust particles.Two years guarantee (except flashtubes). ✚ Safety circuit inside. Switches the stroboscope off when the supply unit or the lamps are opened. This safety measure excludes danger from the maintenance personnel when exchanging the flashtubes.

Checking is ok. With Drello it’s easier.

www.drello.de