Text version of the page

Dräger Flame 1700

Isolated 4 to 20 mA as standard Complete flexibility enables the detector to be operated from a separate powersupply (as a 4 wire device) or as a 3 wiredevice where there is no requirement for an isolated output.

The Dräger Flame 1700 is an UV flame detector, designed forthe detection of non-organic based fires such as hydrogen and metals as well as organic based fires. The detector provides flexibility with its numerous output modes, and advanced design features ensure reliability and speed in the detection of such fires.

Easily visible status LED A tri-coloured LED which is visible at the front of the detector provides a simple status indication to personnel in closeproximity to the detector. Green indicatesnormal operation; yellow indicates a fault and red indicates the presence of radiation. Worldwide Approvals The Dräger Flame 1700 can be used worldwide with the following approvals:ATEX, IECEx, FM and CSA.
ST-474-2004 ST-326-2008 Simple installation Installation is simple! The detector is easily installed with a stainless steel mounting bracket; this can be rotated to ensure optimum positioning of the detec-tor in relation to the potential fire source.Angular markings allow the positioning angles of the de tector to be recorded forfuture refe rence. Detector flexibility As well as a 4 to 20 mA output and 3 relays, an optional RS 485 output is alsoavailable, which can be multi-dropped to a central location. This provides a number of options for detector monitoring and thetriggering of the necessary control actionupon the detection of a fire. Automatic and manual optics checks
ST-341-2004 Automatic checks of the detector electro-nics and optics ensure no fault goes undetected. Additionally the test can be triggered manually at anytime.
Dräger Flame 1700:Explosion proof UV flame detector for hydrocarbon and non-hydrocarbonbased fires