catalogue search
P. 01
P. 02
P. 03
P. 04
P. 05
P. 06
P. 07
P. 08
P. 09
P. 10
P. 11
P. 12
P. 13
P. 14
P. 15
P. 16
P. 17
P. 18
P. 19
P. 20
P. 21
P. 22
P. 23
P. 24
P. 25
P. 26
P. 27
P. 28
P. 29
P. 30
P. 31
P. 32
P. 33
P. 34
P. 35
P. 36
P. 37
P. 38
P. 39
P. 40
P. 41
P. 42
P. 43
P. 44
P. 45
P. 46
P. 47
P. 48
P. 49
P. 50
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
You may also be interested in
Release agent, Anti-seize paste, Lubrication oil, Silicone grease, High pressure grease
Text version of the page
Molykote
®Food Grade Spray Oil
ā—¸ Primary Use – Multi-purpose spray lubricant for lubrication of mechanical componentsin food and beverage processing equipment. ā—¸ Special Characteristics – Good penetration; high load capability and corrosionprotection. Acceptable under FDA 21 CFR 178.3570 for use in applications with incidental food contact. ā—¸ Physical Form – Water-white mineral oil fortified with EP/AW additives and acorrosion inhibitor.Dispersions and Other Products ā—¸ Applications – Chains, slides, guides, tracks, augers, tools and other equipment. ā—¸ Temperature Range – From 14 to 248°F (-10 to 120°C). ā—¸ Container Size – Spray.
Molykote
®G-Rapid Spray
ā—¸ Primary Use – Reducing friction and wear on parts during assembly and breaking-in. ā—¸ Special Characteristics – Low coefficient of friction; extreme loads; low speeds. ā—¸ Physical Form – Gray-black paste or spray of MoS2 and other lubricating solids inmineral oil. ā—¸ Applications – Breaking-in bearings, splines, gears, cams, tracks; lubricating gears,chains, conveyor tracks, thread cutting; lubricating during metal forming, general parts assembly, press-fitting, cold extrusion. ā—¸ Temperature Range – Solids to 750°F (400°C); base oil from 0 to 250°F (-18 to 121°C). ā—¸ Limitations – Reduce torque values by approximately 1/3 when used on threadedconnections. ā—¸ Container Sizes – Spray. 39