Catalogues - metering-and-mixing-system-eldo-mix-202

Catalogue Metering and Mixing System ELDO-MIX 202

www.dopag.ch

Page

/ 4

Contact the
Manufacturer

Where to buy
this product ?

Request
a Quote

DOPAG - 94308, 255776, 5423, 89312, 80855, 97755, 89518

/ 4

See other catalogues for DOPAG

Text version of the page

Function

The ELDO-MIX 202 is fitted with a static mixing unit that includes a twin snuffer valve combined with a disposable static mixer.

Should mixed material be allowed to cure in the mixer, it can be replaced simply and inexpensively, thus avoiding a time consuming, expensive and environmentally damaging flushing cycle.

Pressure vessels are used to supply the material into the three phase asynchronous motor manufacturers driven industrial gear pumps where they are proportioned at the pre-selected ratio.

Each gear pump is protected against over/under pressure as standard.

The control unit is either controlled by a metering computer or PLC SUPPLIER.

Pressure vessel

lecnmcai Data


	Flow rate	up to 7 l/min, depending on mixing ratio
		and viscosity
	Mixing ratio	100:100 to 100:5, by volume
	Maximum working pressure	70 bar
	Mixing system	Static mixing system
	Mixing system	- Twin snuffer valve
		- Disposable static mixer
	Material supply	Pressure vessels, 6 to 120 l
	Viscosity range	50 to 80,000 mPa s, with pressure vessel
	Viscosity range	up to 300,000 mPa s, with drum pumps suppliers
	Material characteristics	Unfilled, filled, slightly abrasive
	Power supply specifications	3 x 400 V / 50 Hz / 16 A
	Maximum air inlet pressure	6 bar
	Dimensions L x W x H	approx. 1.200 x 800 x 1.950 mm,
		depending on configuration

Weight approx. 350 kg