puma-600-700-800
16Pages

{{requestButtons}}

Catalog excerpts

puma-600-700-800 - 1

Heavy Duty Turning Center

Open the catalog to page 1
puma-600-700-800 - 2

Heavy Duty Turning Center

Open the catalog to page 2
puma-600-700-800 - 3

Massive yet Responsive Most Powerful Machines in Their Class. The PUMA 600 / 700 / 800 series turning centers are the most powerful machines in their class. Designed for heavy and interrupted cutting, holding long term accuracies, and maintaining superior finishes. High metal removal rates along with rapid positioning and high speed turret indexing, guarantee unmatched cycle times when real performance is essential. Proven manufacturing techniques and ultra rigid construction are combined with advanced technological features to produce superior machine with exceptional values.

Open the catalog to page 3
puma-600-700-800 - 4

Main Spindle Main Spindle Drive The 45kW ( 60.3Hp ) spindle motor provides power for heavy stock removal, greatly reducing the number of roughing passes required. The reliable digital AC spindle motor provides fast acceleration and is maintenance free. The preloaded spindle bearings are specifically calibrated to maintain the perfect balance of rigidity and speed. The geared headstock ensures optimal power throughout a wide speed range. Headstock and Spindle Construction The headstock casting is made of Meehanite and ribbed on the outside to increase the surface area for better heat...

Open the catalog to page 4
puma-600-700-800 - 5

Turret Heavy Duty Turret The large 12 station heavy duty turret features a large Curvic coupling diameter. This heavy duty design provides unsurpassed rigidity for heavy stock removal, fine surface finishes. Index time ( 1-station swivel ) Preci-Flex Ready Rotary Tools Preci-Flex ready rotary tool holders are available on the milling versions. Preci-Flex is a tooling system utilizes the existing ER collet taper in the rotary holders. The spindle face is precision ground relative to the taper and there are four drilled and tapped holders in this face. The Preci-Flex adapters locate on both...

Open the catalog to page 5
puma-600-700-800 - 6

Bed and Way Construction Doosan Infracore precision machine tools are internationally known for their durability, rigidity and high accuracy. Only well proven and time tested manufacturing techniques can produce machines of this quality. The PUMA 600 / 700 / 800 series is a true 45 degree slant bed design. The bed is a one piece casting with both the saddle and tailstock guideways in the same plane to eliminate thermal distortion. The heavily ribbed torque tube design prevents twisting and defor-mation. Fine grain Meehanite processed cast iron is used because of its excellent dampening...

Open the catalog to page 6
puma-600-700-800 - 7

Human Friendly Double-Paneled Safety Window Operator’s Panel The operator safety can be enhanced through the front door with its shock absorbing laminated glass and double panel construction. The windows without grating also provide a clear view of the machine inside. The operator control panel is mounted on an adjustable pendant for easy viewing and accessibility during setup and operation. The layout and location of the panel is ergonomically designed to be efficient and conven-ient for the operator. Comprehensive alarm diagnostics are provided for the machine, control and programming...

Open the catalog to page 7
puma-600-700-800 - 8

Eco-Friendly Design Metered Way Lubrication Hydraulic Power Unit Automatic lubrication is provided to all guideways, ball screws and the tailstock quill. A maintenance free piston distributor delivers a precise quantity of oil to each lubrication point. The 4.3 L ( 1.1 galon ) reservoir lasts up to 80 hours. A low level alarm prevents the machine from restarting without lubricant. The temperature of the hydraulic oil is regulated by a cooling system. Coolant System The high pressure flushes chips out of drilled holes, reduces the need for peck drill cycles, meets the requirements of most...

Open the catalog to page 8
puma-600-700-800 - 9

Tooling System PUMA 600 [L] / 700 [L] / 800 [L] Unit : mm ( inch ) Standard Extended O.D Tool Holder Face Tool Holder Drill Sockets Straight Milling Head (2) Milling Arbor Adapter Angular Milling Head Spanner Wrench U-Drill Sleeves ø80 U-Drill Drill Sockets opt. Drill Extended O.D Tool Holder Face Tool Holder Note ) bove tooling system is our recommendation. A Depending on export condition, the standard tooling packed with the machi

Open the catalog to page 9
puma-600-700-800 - 10

Working Range PUMA 600 / 700 / 800 Straight Milling Unit Angular Milling Unit Stroke Diagram Stroke Diagram

Open the catalog to page 10
puma-600-700-800 - 11

Angular Milling Unit Straight Milling Unit Stroke Diagram Stroke Diagram

Open the catalog to page 11
puma-600-700-800 - 12

Tool Interference Diagram PUMA 600 [L] / 700 [L] / 800 [L] ) 3.0 (1

Open the catalog to page 12
puma-600-700-800 - 13

Front View Leveling Position (16 PLACES) Right View LEVELING POSITION (12 PLACES) AIR INPUT LEVELING POSITION (12 PLACES) Front View External Dimensions Unit : mm ( inch ) Electric Power Inlet (60 HOLE) 565(22.2)850(33.5) 720(28.3)960(37.8)735(28.9) 1020(40.2) 907(35.7) AIR INPUT

Open the catalog to page 13
puma-600-700-800 - 14

Machine Specifications ( PUMA 600 / 700 / 800 ) Unit Swing over bed Swing over saddle Recom. turning diameter Max. turning diameter Max. turning length mm ( inch ) mm ( inch ) mm ( inch ) mm ( inch ) mm ( inch ) Travel distance X-axis Z-axis Rapid traverse mm ( inch ) mm ( inch ) m/min ( ipm ) mm/rev ( ipr ) r/min ASA Max. cutting X/Z feedrate Spindle speed Spindle nose Spindle bearing diameter Main mm ( inch ) Spindle ( Front ) Spindle through hole mm ( inch ) Cs spindle index angle deg No. of tool station ea OD tool height mm ( inch ) Boring bar diameter Turret mm ( inch ) Indexing time (...

Open the catalog to page 14
puma-600-700-800 - 15

NC Unit Specifications FANUC 32i Controls Axis Functions Feed Functions Axuiliary & Spindle Functions Programming Functions Tool Functions Setting & Display Data input & Output Other Functions Item Controlled axes Simultaneously controlled axes Backlash compensation Cs contouring control Follow-up / Chamfering on/off HRV2 control Least input increment Stored stroke check1 Automatic operation ( memory ) / Buffer register Handle incremental feed Search function 1st, 2nd reference position check / return G27/ Manual / G28 / G30 Arbitrary speed threading Circular interpolation Continuous...

Open the catalog to page 15
puma-600-700-800 - 16

Head Office Doosan Tower 20th FL., 18-12, Euljiro-6Ga, Jung-Gu, Seoul, Korea 100-730 Tel : ++82-2-3398-8693 / 8671 / 8680 Fax : ++82-2-3398-8699 Doosan Infracore America Corp. 19A Chapin Rd. Pine Brook, NJ 07058, U.S.A. Tel : ++1-973-618-2500 Fax : ++1-973-618-2501 Doosan Infracore Germany GmbH Emdener Strasse 24 D-41540 Dormagen Germany Tel : ++49-2133-5067-100 Fax : ++49-2133-5067-001 Doosan Infracore Yantai Co., LTD 13 Building, 140 Tianlin Road, Xuhui District, Shanghai, China (200233) Tel : ++86-21-6440-3384 (808, 805) Fax : ++86-21-6440-3389 EN 140829SU - The specifications and...

Open the catalog to page 16

All Doosan Infracore Machine Tools catalogs and technical brochures

  1. VC 630-5AX

    12 Pages

  2. BM2740M

    4 Pages

  3. DNM 350-5AX

    4 Pages

  4. DNM 200-5AX

    4 Pages

  5. DBD Series

    8 Pages

  6. DCM Series

    20 Pages

  7. PUMA 480

    16 Pages

  8. PUMA 400

    16 Pages

  9. PUMA GT series

    24 Pages