CNC turning turning - 24 Pages

  1. P. 1

  2. P. 2

  3. P. 3

  4. P. 4

  5. P. 5

  6. P. 6

  7. P. 7

  8. P. 8

  9. P. 9

  10. P. 10

  11. P. 20

Catalogue excerpts

CNC Automatic Turning SPRINT linear Series

 Open the catalogue to page 1

SPRINT linear series: Economic and productive in the complete machining of small and large series. With the new SWISSTYPEkit, short and long turning parts can be manufactured on one machine. |1| Coupling piece – Hydraulics industry |2| Valve |3| Distributor – Hydraulics industry |4| Valve |5| Distributor – Automotive industry |6| Spindle |7| Spindle – Electronics industry |8| Spindle – |9| Bolt – Medical industry 3 4 7 5 6 8 9

 Open the catalogue to page 2

from the bar to the finished part. Time is money and also flexibility. Today the ideal combination of both because this goal could be realised with the SPRINT linear series from GILDEMEISTER Italiana. Economic production is not the only advantage: Thanks to the great and the possibility to produce complex parts, the machines of the SPRINT series satisfy the highest demands. On the basis of the new work area concept, you can offer considerably productivity in the bar machining of work pieces between 4 to 70 mm ( in diameter, and respectively chucking parts up to 175 mm in diameter. In addition,...

 Open the catalogue to page 3

challenging work pieces up to 25 mm The new machine design of the SPRINT 20 linear will impress you (standard) and more tools on the main and counter spindles through flexibility and performance. The movable spindle stock with an integrated moves with a range of 80 mm on the Z-axis. The linear arranged tools carriage 1, as well as the power tools, make simultaneous machining possible. At the same time, the work piece can be machined on the and with the integrated spindle motor and driven tools. SWISSTYPEkit: With the new conversion kit, the SPRINT 20 linear converted in a simple and fast manner...

 Open the catalogue to page 4

3 4 Z1 C1 Y1 Highlights _ Linear drive in X1 for maximum precision, performance and profitability _ Six + two axes, two Y-axes in the standard version _ Integrated spindle drives with 10,000 rpm for the main and counter spindles _ Up to two tools in simultaneous operation _ More tools: Main spindle: twelve, five driven; counter spindle: eight, five driven* _ No discharge time due to the discharge system on the counter spindle (in the standard version) _ High energy efficiency: Intelligent design of the machine, automatic disconnection of the machine _Numerous software options for optimum profitability,...

 Open the catalogue to page 5

2 3 Z1 C1 C2 Y1 X1 linear Y2 5 Highlights _ Linear drive in X1 with 40 rpm rapid traverse for maximum precision and dynamics _ Two Y-axes and two C-axes in the standard version for the main and counter spindles _Driven tools with chip- to-chip times of 0.24 seconds _ Up to two tools in simultaneous operation _ Linear tool holder for a drastic reduction of downtimes _ No discharge time with the discharge system on the counter spindle (standard version) _ Tool wear monitoring and sister-tool system for an increase in productivity (optional) |1| Linear drive in X1 for maximum precision and |2| Complete...

 Open the catalogue to page 6

The fastest singular turning machine bar machining. The SPRINT 32 linear and the SPRINT 42 linear with six and eight axes alternative for the fast production of work pieces with simple to medium and achieve cycle times as with curve-controlled automatic lathes. Highly dynamic linear drives with 40 rpm rapid traverse and the design of the linear tool holder system, make it possible to achieve chip- that are almost unattainable with conventional turning machines. This valid for driven tools with a chip-to-chip time of 0.24 seconds. Demands for repeat accuracy, frequently requested criteria not automotive...

 Open the catalogue to page 7

design for short and long turning parts. With the new SPRINT 42 | 10 linear, GILDEMEISTER Italiana offers machine design that distinguishes itself through the highest measure and productivity. DirectDrive Technology and linear motors on the spindles, up to 30 tools, three of which can operate in parallel, and with 2.2 kW capacity of 16 driven tools on the tool turret, provide performance. In addition, the SPRINT 42 | 10 linear with the patented SWISSTYPEkit conversion kit can seemlessly convert a short-turning machine into a long- machine, making the machining of a broad range of parts possible....

 Open the catalogue to page 8

4 5 2 Z1 Y1 X3 C1 X1 C2 |1 + 2| SWISSTYPEkit: With the optional conversion can be converted easily and quickly from a short-turning to a long-turning machine |3| Work area of the SPRINT with 10 axes |4| Simultaneous milling machining tools on the main spindle |5| Machining on the counter (also with driven tools) Highlights _ Reduced production costs for short and long turning parts by using the SWISSTYPEkit _ DirectDrive Technology for the main and counter spindles, two linear motors and a torque motor for the turret drive and 16 driven tools (programmable on the main and counter spindles) _ Direct...

 Open the catalogue to page 9

SPRINT 50 linear, the new turning machine from GILDEMEISTER will impress you not only with the new DMG machine design, but solution for the machining of bars of up to 51 mm in diameter. The spindle and three new tool turrets with 12 driven tools each, provide performance. The patented DirectDrive Technology enables the pivoting turret plate, thus making the most complex machining on both spindles The linear drive in X3 assures the highest repeat accuracy that is main and counter spindles. Also new is the pneumatic controlled that minimises cycle times. technology for shortest parts production...

 Open the catalogue to page 10

4 Z3 X3 Y3 Z1 X1 Y1 X2 C1 |1| Work area of the SPRINT 50 linear |2| Up to three driven tools in simultaneous operation is possible on the main and counter spindles |3| DirectDrive Technology |4| Work area design SPRINT 50 linear Highlights _ New Design: Optimum access and more transparency to the work area _ Linear drive in X3 for maximum precision, applicable on the main and counter spindles _ Three tool turrets with 12 driven tools tool number possible) and up to three in simultaneous and independent operation _Y-axis in the standard version on slide main and counter spindles _Virtual Y-axis...

 Open the catalogue to page 11

Highlights (with three turrets) _ Up to three driven tools in simultaneous independent operation _ Linear drive in the X3-axis for maximum applicable on the main and counter spindles _ Three turrets with 12 driven tools each _ Hydraulic work piece clamping for the counter spindles _ Two water-cooled spindle drives for accessibility _ In the standard version: Handling system a transport band for completed parts _ Bars as well as chuck machining possible _Option: Direct integration of a gantry system basic machine (measuring, marking, SPC SPC control, all in one production step) _Y-axis in the standard...

 Open the catalogue to page 12

All DMG MORI catalogues and technical brochures

  1. J series

    4 Pages

    En
  2. NT Series

    27 Pages

    En
  3. CLX SERIES

    16 Pages

    En
  4. CUSTOMER FIRST

    6 Pages

    En
  5. GM series

    16 Pages

    En
  6. NZX-S 2500

    24 Pages

    En
  7. CLX 450

    14 Pages

    En
  8. NEF Series

    22 Pages

    En
  9. NT6600 DCG

    14 Pages

    En
  10. NLX 6000 | 2000

    21 Pages

    En
  11. UNO Series

    6 Pages

    En
  12. ecoTurn

    26 Pages

    En
  13. ULTRASONIC Series

    34 Pages

    En
  14. NT series

    36 Pages

    En
  15. NZX-S 1500

    11 Pages

    En
  16. CTX beta 800 TC

    26 Pages

    En
  17. DMU 50 / 70 Series

    18 Pages

    En
  18. automation

    56 Pages

    En
  19. DMG MORI Systems

    30 Pages

    En
  20. Tool presetting

    24 Pages

    En
  21. SL-803

    8 Pages

    En
  22. SL-603

    15 Pages

    En
  23. SL-403

    12 Pages

    En
  24. NLX4000

    16 Pages

    En
  25. NLX3000

    18 Pages

    En
  26. NLX1500 / NLX2000

    21 Pages

    En
  27. NLX2500

    20 Pages

    En
  28. CL-253

    9 Pages

    En
  29. CL1500 / CL2000

    13 Pages

    En
  30. DMU 50 ecoline

    16 Pages

    En
  31. CTX 310 ecoline

    20 Pages

    En
  32. DMG Microset

    22 Pages

    En
  33. MILLTAP 700

    18 Pages

    En
  34. ECOLINE Mailing

    17 Pages

    En
  35. SPRINT 50

    28 Pages

    En
  36. NT 6600

    8 Pages

    En
  37. NTX 1000

    6 Pages

    En

Archived catalogues

  1. LASERTEC Series

    54 Pages

    En
  2. NL Series

    36 Pages

    En
  3. NEF 400 / NEF 600

    26 Pages

    En