CATALOGUE CLOCKS
12Pages

{{requestButtons}}

Catalog excerpts

CATALOGUE CLOCKS - 1

DMR FAMILY CLOCKS GENERAL INFORMATION CLOCK MONOCOLOR INDOOR AND OUTDOOR THERMOMETER CHRONOMETER This brochure describes the functioning and the characteristics of the DMR family clocks / thermometers / chronometers.

Open the catalog to page 1
CATALOGUE CLOCKS - 2

DMR FAMILY CLOCKS INTRODUCTION The DMR family clocks have been designed for the display of time, and temperature in indoor and outdoor installations, for short distance (10 to 20 meters) or long distance Reading (up to 400 meters). They can also function in chronometer mode. Modular technology offers a big variety of communication options for adaptation to different types of installation like for server synchronisation, GPS, clock networks… The production with extruded aluminium profiles as well as the fabrication method assure the product's sealing as well as its optimal durability. These...

Open the catalog to page 2
CATALOGUE CLOCKS - 3

DMR FAMILY CLOCKS MODEL READING DISTANCE To display information at any given distance, besides other secondary factors like contrast and colour, it is necessary to chose a character height adapted to this distance, the width being proportionate to the height. The DMR family proposes different character heights which allow reading distances from several meters to more than 400m. The table on the left shows the different heights and corresponding maximum reading distances. It has to be noted that distances are approximate and may vary according to the person, the LED colour, the ambient...

Open the catalog to page 3
CATALOGUE CLOCKS - 4

DMR FAMILY CLOCKS DIGIT TYPE All clocks have a LED display. The hour, date and temperature are represented with 7-segment digits type. These allow different transition modes between the hour, date and temperature variables (ascending, descending, superposed, odometer appearance mode) and are therefore more attractive to the public. This product is therefore ideal for integration within advertising elements like signs and totems. DMR21R FRAME AND SEALING All DMR clocks have been designed with an IP54 protection index, which allows the external installation of any model in this series. The...

Open the catalog to page 4
CATALOGUE CLOCKS - 5

DMR FAMILY CLOCKS CONTROL AND CONFIGURATION MODES NATIVE COMMUNICATION DMR clocks are all equipped with a mini USB communication port. This port allows the configuration of different appliance`s parameters with the MPTools software, like setting the time, temperature offset, manual/automatic luminosity, appearance mode, etc. Certain parameters are only accessible this way . The USB port is provided only for the initial and temporary clock configuration, not for an ongoing communication with it. INFRARED REMOTE CONTROL (IR) This is the easiest and fastest mode to configure and control the...

Open the catalog to page 5
CATALOGUE CLOCKS - 6

DMR FAMILY CLOCKS COMMUNICATION RS 232/RS 485 (X) Communication module RS232 and RS485. This module is ideal to create a clock network, where all displays shall be equipped with this module and will be automatically synchronised with the master clock. GPS RECEPTOR (A) The time synchronization by GPS signal is one of the most practical, no communication lines being needed. The precision is of some hundredths of seconds. The antenna must be placed outside or on a place offering good GPS signal reception (window…). DMR17 CONNECTION TCP/IP (NE) (Cable). Communication mode TCP/IP. To synchronize...

Open the catalog to page 6
CATALOGUE CLOCKS - 7

DMR FAMILY CLOCKS HYBRID MODULE GPS / RS485 (AX) This hybrid module GPS/RS485 has been designed for the models with only one slot for modules. In the case of a clock network, the hour is synchronized by GPS and sent to the slave clocks by RS485. LUMINOUS ALARM ILLUMINATION CONTROL PERIPHERAL RELAY OUTPUTS 1 or 2 relay output option according to the model, which can be associated with display variables such as the time, date, temperature, chronometer, as well as other functionalities. It is possible to configure up to 10 alarms for each output. This option is considered like a peripheral...

Open the catalog to page 7
CATALOGUE CLOCKS - 8

DMR FAMILY CLOCKS COMPATIBILITY TABLE MODELS / CHARACTERISTICS MODELS CHARACTERISTICS DISENOS Y TECNOLOGIA, S.A. Xarol, 8-C P.I. Les Guixeres 08915 Badalona (Barcelona) - Spain

Open the catalog to page 8
CATALOGUE CLOCKS - 9

DMR FAMILY CLOCKSELECTRIC AND MECHANIC CHARACTERISTICS MODEL Model (x=2 ^ Double face) Power Supply IR=IR Remote Control RF=RF Remote Control DISENOS Y TECNOLOGIA, S.A. Xarol, 8-C P.I. Les Guixeres 08915 Badalona (Barcelona) - Spain

Open the catalog to page 9
CATALOGUE CLOCKS - 10

DMR FAMILY CLOCKS Supply Cable passage Temperature Probe passage Clock suspension brackets Natural ventilation grid with anti-rain system Communication Cable passage (optional) MOUNTING SUPPORTS DETAIL DMR212 BACK VIEW FRONT VIEW Brackets for wall mounting Clock, thermometer, stopwatch 125 mm Character height ith IP54 protection Compatible with mercury environment Black frame color MOUNTING SUPPORTS DETAIL DMR12 DISEÑOS Y TECNOLOGÍA, S.A. Xarol, 8-C P.I. Les Guixeres 08915 Badalona (Barcelona) - Spain

Open the catalog to page 10
CATALOGUE CLOCKS - 11

DISEÑOS Y TECNOLOGÍA, S.A. Xarol, 8-C P.I. Les Guixeres 08915 Badalona (Barcelona) - Spain

Open the catalog to page 11
CATALOGUE CLOCKS - 12

DISENOS Y TECNOLOGIA, S.A. Xarol, 8-C P.I. Les Guixeres 08915 Badalona (Barcelona) - Spain

Open the catalog to page 12

All DITEL catalogs and technical brochures

  1. KOSMOS

    7 Pages