catalogue search
P. 01
P. 02
P. 03
P. 04
P. 05
P. 06
P. 07
P. 08
P. 09
P. 10
P. 11
P. 12
P. 13
P. 14
P. 15
P. 16
P. 17
P. 18
P. 19
P. 20
P. 21
P. 22
P. 23
P. 24
P. 25
P. 26
P. 27
P. 28
P. 29
P. 30
P. 31
P. 32
P. 33
P. 34
P. 35
P. 36
P. 37
P. 38
P. 39
P. 40
P. 41
P. 42
P. 43
P. 44
P. 45
P. 46
P. 47
P. 48
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
You may also be interested in
Seal, Recess handle, Quick release fastener, Bow-type handle, Locking device
Text version of the page
3-161SL Flat Rod for Ramp-Shoe SNAP-LINE tool-less installation Flat rod for SNAP-LINE rod system. • For ramp-shoe. • The rods are used with rod control-unit (product system 3-150SL). • This system is especially designed to make special length rods. • The top part of the rod has to be inserted as per drawing with 5 openings into the rod latch (product system 3-150SL). • The bottom of the flat rod needs a square 6.2mm or a round 7.5mm hole. • The ramp-shoe is pushed on and snaps into the hole. Material: • Flat rod: steel, zinc plated • Ramp-shoe: PA, black J5_ (0.118) o centre of 13.5 t control unit (0.531) Instructions for production of the 2nd hole -LLď m For Part No. please contact DIRAK. Please advise following détails: 1. Lengths X and L 2. Dimension A pl=L-X a) Flat rod for ramp-shoe Formula for calculation of the rod length pl= L-x e.g. L=1000mm-X=32.5=967.5mm b) Ramp-shoe for standard frame Bending A 18 / 0.709 20 / 0.787 25 / 0.984 Dimension X 32.5 / 1.280 32.5 / 1.280 32.5 / 1.280 208-1063.15-pl in mm 208-2403.03-00018 208-2403.03-00020 208-2403.03-00025 DIRAK GmbH Konigsfelder Str. 1 58256 Ennepetal Tel.: 02333.837-0 Fax: 02333.837-100 www.dirak.com 06.02.2012 © copyright by DIRAK / Germany 04.29