Catalogue - Catalogue: Quarter-Turns - DIRAK - (Version JPG)

See other catalogues for DIRAK

Flush pull handle, Hinge, Rubber seal, Locking device, Aluminum handle

Text version of the page

www.dirak.com

Quarter-Turn with 90°

rotation, RH or LH application. The Quarter-Turn consists of three basic components which can be combined to suit your application.

On request parts can be assembled by DIRAK.

• A pre-assembled Quarter-Turn can be installed in the cutout.

Material:

• Housing: zinc die, chrome plated or

black coated or PA, black


PA, black	zinc die zinc die	key
a) Housing	chrome plated black coated	(zinc die)
with nut 220-9020	220-9001 220-9003	-
with grounding/earthing nut 220-9021	220-9002 220-9004	-
with nut and grounding/earthing clip 220-9022	220-9005 220-9006	-
b)Insert with screw and wave washer
Triangular 6.5 -	220-9101 220-9104	204-0112
Square 6 -	220-9102 220-9105	204-0111
Slotted 1.5 -	220-9103 220-9106	-
Socket head (Allen) 4mm (5/32) -	220-9118 220-9119	-
Socket head (Allen) 6mm -	220-9107 -	-
Wing knob, PA, black / zinc die 220-9117	- -	-
c) Cam H in mm / inch	steel zinc plated
7.5 / 0.295	220-0503
13.5 / 0.531	220-0501
19.5 / 0.768	220-0502
Special cams see product system 1-058.

Optional
Water- and dust-tight according to IP65 by:
d) O-Ring	220-0601
e) Flat external seal	220-0701
f) Finger pull see product system 1-060	220-1301.3
When using the finger pull the H dimension decreases by 0.8mm !

WITHOUT O-Ring WITH O-Ring
g) Assembling	220-0001	220-0002
Assembling to b) Wing knob cam 90° to wing knob 220-0006		220-0007

Insert: zinc die, chrome plated or black coated or combination of PA, black/zinc die Screw and wave washer: steel, zinc plated Key: zinc die

Cam: steel, zinc plated

Finger pull: PA, black

DttVW

comnlisnt

Catalogue: Quarter-Turns - DIRAK - #4

Flush pull handle, Hinge, Rubber seal, Locking device, Aluminum handle