catalogue search
P. 01
P. 02
P. 03
P. 04
P. 05
P. 06
P. 07
P. 08
P. 09
P. 10
P. 11
P. 12
P. 13
P. 14
P. 15
P. 16
P. 17
P. 18
P. 19
P. 20
P. 21
P. 22
P. 23
P. 24
P. 25
P. 26
P. 27
P. 28
P. 29
P. 30
P. 31
P. 32
P. 33
P. 34
P. 35
P. 36
P. 37
P. 38
P. 39
P. 40
P. 41
P. 42
P. 43
P. 44
P. 45
P. 46
P. 47
P. 48
P. 49
P. 50
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
You may also be interested in
Hinge, Quarter turn lock, Plastic handle, Bow-type handle, Flush pull handle
Text version of the page
| DIRAK8 1-045 Compression Latch Pr14.1 www.dirak.com | |||||||||||||||||||||||||||||||||||||
| Compression latch with 4.5mm clamping grip. • RH or LH application. • Vibration proof. • The closing action is always clockwise. By turning the insert 90° the cam is at first put into closed position. By turning a further ii5°, the cam will be pulled towards the frame. In the final position, closed and compressed. The H-dimension can be easily adjusted by the adjusting screw. Water- and dust-tight according to IP65 EN 60529. A pre-assembled quarter-turn can be fitted through the cutout. | |||||||||||||||||||||||||||||||||||||
| (0.846) | |||||||||||||||||||||||||||||||||||||
| Position of cam and knob: "closed and compressed" "open' | |||||||||||||||||||||||||||||||||||||
| Material: • Housing: zinc die, black coated Insert shaft: zinc die, black coated Knob: PA, black Cam: zinc die, black coated Adjusting screw: steel, zinc plated | |||||||||||||||||||||||||||||||||||||
| (1.004) | |||||||||||||||||||||||||||||||||||||
| |||||||||||||||||||||||||||||||||||||
| DtfVW Bohret compliant | |||||||||||||||||||||||||||||||||||||
| 02/06/08 © copyright by DIRAK / Germany | |||||||||||||||||||||||||||||||||||||