Text version of the page

COLOUR READERLC CLARYS Dimensions

LC CLARYS

?? ??

Brackets for optical fibres FLC HR25 and HR70

Direct mounting on profile 35 mmDirect mounting supplied plate
40,5 45 1515 (1) 21 6039 7,452xM4 26 351010 4814 18,5 (1) 50 51 7 99 45 48,510,522 ø4,3ø4,3 16 10 24 ø4,3 32,5 ( 1) 4 x 4.2 for countersunk screw.(1) 2 elongated holes dia. 4.1 x 10

Wiring diagrams

(1) 5 digital colours version Cable connection 26 encoded colours version

Poutputs N OutputsPoutputsN Outputs Bracket 9LCBracket 925
12-30 V 12-30 V 12-30 V 12-30 V 0 VOutputs 1,2,3,4,5Sync input 0 VOutputs 1,2,3,4,5,6 0 V Sync inputOutputs 1,2,3,4,5 0 VOutputs 1,2,3,4,5,6 AB 1 Brown12-30 V 1 BrownS6, sync input or data validation
2413 2 WhiteS2
2413 2 WhiteS4 3 Blue0V 3 BlueS5 4 BlackS1 4 BlackS3

Technical characteristics

Product certificationsAmbient air temperature For operations0… +60 °CStorage-20... +80 °C

Presentation

Vibration resistance Conforming to IEC 60068-2-6Amplitude ±0.75 mm, f = 10.55 Hz, 1 octave/mm Shock resistance Conforming to IEC 60068-2-2730 gn, 11 ms 1/1 sine, 1 shock/3 axes Degree of protection Sensor: IP40; optical fibre: IP65 Connection M8 connector Materials CasePolyamide PAScreenPolyamide PA
1screen/menu access- general settings - display recognised colour No.- colour selection - high-performance teach mode2Selection and setting knob 3Removable memory option Spot diameter 2…8 mm depending on associated fibres:

123

Immunity to ambient light Natural light6000 Lux max.Incandescent light5000 Lux max. 100 mAwith overload and short-circuit protectionVoltage drop, closed state Rated supply voltage12...30 V (including ripple) Switching capacity 2 VCurrent consumption, no-load 120 mAtypical NO/NC function Selectable for all outputs (only for LC CLARYS 5D detectors) Data validation output Valid binary data: closed state(only for LC CLARYS 26C detectors)

AB

Response time fast mode450 µsnormal mode1 ms high-resolution mode20 ms Maximum switching frequency 1.1 kHz Resolution RGB 12 bits Colour recognition time delay Trailing edge (off delay)0 to 1950 msAdjustment increments10 ms Integration of colour Duration0 to 500 ms recognition Adjustment increments0,1 ms
(1) 5 digital colours detector, 1 output Por N per colour + one synchronization input P(or N) (run/hold).26 encoded colours detector: The recognised colour number is binary encoded on 5 outputs. Asixth output indicates “valid binarydata”

Z.I. B.P. 82 - F - 76220 Gournay-en-Bray - Tél. +33.(0)2.32.89.93.10 - Fax +33.(0)2.32.89.93.11 - e-mail : dinel@dinel.com